Can You Continue Driving with a Noisy Front Wheel Bearing?

What Causes a Truck to Emit Black Smoke When Starting?

Excessive black smoke from diesel engine exhaust is mostly caused by incomplete combustion due to uneven or excessive fuel supply in each cylinder, insufficient air intake, poor atomization, or premature injection timing. Below are the inspection methods: 1. Remove the air filter and observe the exhaust smoke color: If the black smoke condition improves, the fault is caused by severe contamination of the air filter. 2. Check if the fuel supply timing is too early: If it is, adjust it accordingly. 3. During engine operation, conduct a cylinder-by-cylinder fuel cut-off test: When a cylinder's fuel supply is cut off, if the engine speed decreases, black smoke significantly reduces, and knocking sounds weaken or disappear, it indicates excessive fuel supply in that cylinder. If the engine speed changes slightly and the black smoke disappears, it indicates poor spray quality of that cylinder's injector. After identifying the faulty cylinder, disassemble and inspect the injector. If necessary, replace it with a new injector for comparison. If the fault disappears with the new injector, it confirms that the original injector was faulty.

6

3

Share

Which is better, traditional wiper blades or beam blades?

From the perspective of wiping performance, cleanliness, and pressure application, beam wiper blades are significantly superior to traditional wiper blades. Additionally, during operation, they adapt to the curvature of the windshield without causing scratches on the glass surface. Below are the differences between traditional and beam wiper blades: 1. Traditional Wiper Blades: These rely on multiple pressure points to ensure close contact between the blade and the glass. However, this requires strong pressure from the wiper arm, which can lead to fatigue in the wiper motor. The advantage is their sturdy outer shell, but the downside is poor flexibility during use. 2. Beam Wiper Blades: The first advantage of beam blades is their lightweight design. The second benefit is their single pressure point support system, utilizing a flexible steel strip that ensures tight contact with the blade's edge. This allows effective glass contact with minimal pressure, resulting in thorough cleaning without excessive force on the glass.

14

5

Share

How many microns of cylinder head deformation is normal?

No more than 0.50MM. If the cylinder head has already deformed or the accumulated grinding wear exceeds 0.50MM, it is recommended to replace the cylinder head with a new one. 1. Cylinder head: The cylinder head is installed on top of the cylinder block, sealing the cylinder from the upper part and forming the combustion chamber. It is frequently in contact with high-temperature and high-pressure gas, thus bearing significant thermal and mechanical loads. The cylinder head of a water-cooled engine has a cooling water jacket inside, and the cooling water holes on the lower end face of the cylinder head are connected to the cooling water holes of the cylinder block. Circulating water is used to cool high-temperature parts such as the combustion chamber. 2. Repair method: Since there is no concave combustion chamber on the engine cover, there is no need to consider changes in combustion volume (the change in combustion chamber volume should generally not exceed 4% of the original volume). The cylinder head surface is machined using a planing method. Instead of the rubber sealing ring on the cylinder gasket, the cylinder gasket is installed, and the cylinder head bolts are tightened using a method of cold tightening followed by hot tightening.

19

5

Share

Will I be caught driving at 100 km/h in an 80 km/h speed limit zone during rain?

You will be caught as you have exceeded the speed limit by 10%. The dangers of speeding are as follows: 1. Speeding affects the safety performance of the vehicle: Speeding disrupts the vehicle's operational indices in specific environments, increases the workload and stress on the vehicle, and accelerates wear and tear on components. This is particularly detrimental to the tires, causing jumpy and skidding wear, raising friction temperatures, and making the tires prone to aging and deformation, which can lead to blowouts. 2. Speeding affects the driver's ability to respond promptly and accurately: Prolonged speeding alters the driver's reaction to weak stimuli, causing them to react to stimuli that should not warrant a response while delaying reactions to those that should.

19

5

Share

What is the 0-100 km/h acceleration time of the Xingyue?

According to official data, the Xingyue comes with two engine options: 2.0T and 1.5T. The 1.5T model accelerates from 0-100 km/h in 11.1 seconds, while the 2.0T model achieves it in 6.85 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time include: Torque: Torque, in simple terms, represents the strength of the engine. The greater the torque, the stronger the force pushing the vehicle, resulting in faster acceleration. For example, the BMW X2 has a maximum torque of 220 Nm and accelerates from 0-100 km/h in 9.6 seconds. The Xingyue 1.5T has a torque of 255 Nm but accelerates in 11.1 seconds. Transmission efficiency: The transmission acts as a medium for power transfer and inevitably involves power loss. Higher transmission efficiency leads to better acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Xingyue 1.5T is equipped with a 7-speed wet dual-clutch transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (measured in Hp/T). A higher power-to-weight ratio results in faster acceleration. For instance, the BMW X2 has a power-to-weight ratio of 90 Hp/T and accelerates in 9.6 seconds. The Xingyue 1.5T has a power-to-weight ratio of 109 Hp/T but accelerates in 11.1 seconds.

13

0

Share

What to Do If the Windshield Wipers Start by Themselves and Can't Be Turned Off?

Open the fuse box on the driver's side door to turn off the windshield wiper fuse. Below are the differences between traditional and beam wipers: 1. Traditional Wipers: These use multiple pressure points to ensure close contact between the wiper blade and the windshield. Due to the strong pressure required from the wiper arm, this can lead to fatigue in the wiper motor. The advantage is their sturdy housing, but the downside is poor flexibility during use. 2. Beam Wipers: The first advantage of beam wipers is their lightweight design. The second advantage is that they use a single pressure point, known as a flexible steel strip, which ensures tight contact with the edge of the wiper blade. This allows for effective pressure on the windshield with minimal force, ensuring a thorough and clean wipe without excessive pressure on the glass.

17

5

Share

Can You Continue Driving with a Noisy Front Wheel Bearing?

What Causes a Truck to Emit Black Smoke When Starting?

Which is better, traditional wiper blades or beam blades?

How many microns of cylinder head deformation is normal?

Will I be caught driving at 100 km/h in an 80 km/h speed limit zone during rain?

What is the 0-100 km/h acceleration time of the Xingyue?

What to Do If the Windshield Wipers Start by Themselves and Can't Be Turned Off?

What is the normal pH value of antifreeze?

What are the effects of replacing run-flat tires with regular tires on a car?

What is the bulb model for the Haval F5 headlights?

What's the difference between turning the steering wheel one and a half turns and turning it to full lock?