Can You Continue Driving When the EPC Light Is On?

1 Answers
AniyahFitz
07/28/25 6:04pm
If the EPC light is on but there are no obvious signs of malfunction, the vehicle can still be driven. The driver may try turning the engine off and restarting it to make the EPC light turn off. Even if there are no noticeable issues, it is important to have the vehicle inspected and repaired promptly. EPC stands for Electronic Power Control, and faults indicated by the EPC light are relatively common in vehicle maintenance. If this light comes on, it may indicate a potential issue within the electronic throttle system. Reasons for the EPC light turning on include: 1. Intake system faults, such as leaks or blockages; 2. Dirty or carbon-fouled throttle body; 3. Use of substandard fuel; 4. Abnormal cylinder pressure or poor engine performance; 5. Intermittent faults or false alarms; 6. Valve issues, such as sticking or carbon buildup; 7. ECU (Engine Control Unit) malfunction.
Was this review help?
7
3
Share
More Forum Discussions

How to reset the maintenance light on an old Mercedes ML350?

You need to display the mileage page in the menu, press the middle "R" key three times, hear a beep sound, enter the new menu, scroll to the servicemenu, find serviceaddi, select SERVICE13, and choose 229.5 or 229.5. The following is an introduction to the maintenance light: 1. Introduction: The maintenance light is a reminder function set by the car manufacturer to prompt the owner to perform maintenance at certain mileage or time intervals, in the form of an instrument or screen message or indicator light. Resetting the maintenance light means resetting the reminder information after maintenance is completed, which is essentially an information reset. 2. Function: The function of the maintenance light is to record the mileage of some important components, just like a timer in a sprint race, serving as a reminder for the owner and automotive repair personnel. If the owner replaces the relevant components but does not reset the light, it will not affect the vehicle's performance, but it will cause trouble for the next replacement of car components, as the exact time of the new component's use cannot be accurately known.
13
4
Share

What are the differences between the Lynk & Co 05 Time Limited Edition and the AWD Halo version?

Lynk & Co 05's Time Limited Edition model features all-wheel drive, and its interior design differs from the standard version. Below are the relevant details about the Lynk & Co 05: 1. Exterior Design: It adopts an energy-slot taillight design, arranged in two rows, with a coupe-style design. The side shark gill decorations and extended lines are also very similar to the 01 model. 2. Interior Design: The Lynk & Co 05 extensively uses straight and diamond-shaped lines, creating a strong sense of layering. It employs a new design language, distinct from the curved and rounded interior designs of existing products. The 05 will be equipped with a D-shaped three-spoke multifunction steering wheel and, for the first time, a high-sensitivity gesture touchpad, paired with a newly designed electronic gear lever and sporty paddle shifters. 3. Powertrain Configuration: It offers a 1.5T turbocharged engine and a 2.0T turbocharged engine, with maximum power outputs of 180 horsepower and 190 horsepower, respectively. The transmission is matched with an Aisin 8-speed automatic transmission, and an all-wheel-drive version will also be available.
14
1
Share

Why is the Haval network not working?

Here are the reasons and solutions for the Haval network not working: 1. Poor network coverage around the vehicle: Driving into an underground garage or traveling in remote areas with weak signal coverage can cause the vehicle to lose network connection or have a weak signal. The network connection will automatically restore once the vehicle moves out of the area with insufficient coverage, requiring no special handling. 2. Signal interference: Driving near military management zones or similar areas can cause interference with the vehicle's network signal, leading to unstable or interrupted connections. The network signal will return to normal once the vehicle leaves the restricted area, requiring no special handling. 3. The infotainment system needs an upgrade: If the vehicle has not been on the market for long, the infotainment system might not be fully optimized, leading to unstable program operations. When the system is handling multiple tasks, it may experience lag or errors, causing abnormal network functionality, intermittent connections, or complete disconnections. In such cases, the owner can consider upgrading the infotainment system to improve its performance. Start the infotainment system and check for any new software version updates when the network connection is stable. If an update is available, proceed with the upgrade. This can be done via OTA (Over-The-Air) updates by the owner at no cost. 4. Data traffic is turned off: If the data traffic is disabled, the infotainment system will not have network access. The owner can check whether the data traffic switch is turned off and manually reactivate it through the infotainment system without any additional cost.
20
5
Share

Can the Vios Battery Be Turned Off?

The Vios battery can be turned off, but it is not necessary to do so. The designed lifespan of the battery is 27 months. Generally, family cars are more economical, and new car batteries often last 3-4 years. However, after the first replacement, it is usually necessary to replace the battery again in about 2 years. The steps to test the condition of the battery are as follows: 1. Inspect the battery's exterior: Check if the battery casing is bulging, leaking, has broken separators, or if the battery terminals are corroded. If any of these signs are present, it indicates that the battery is dead. 2. Measure the battery voltage: After charging for two hours, measure the voltage of each individual battery cell every 20 minutes. If the voltage is below 13, it indicates a problem with the battery. During discharge, measure the voltage every 10 minutes in three intervals. If the discharge time is faster than other batteries and the voltage drops below 10V, the battery has an issue. 3. Check if the battery is "dehydrated" or blackened: After charging the battery for 3-6 hours, if the charger's red light remains on, it indicates severe "dehydration" of the battery. Open the cover on top of the battery to reveal six round holes. Check the color of the electrolyte in each hole. If it appears black, it means the lead powder from the plates has fallen off, indicating that the battery is dead.
5
0
Share

Where is the USB port on the Haval Big Dog?

The USB port of the Haval Big Dog is located inside the storage compartment under the front armrest. Simply open the cover to use it. If you want to play music from a USB drive, you can store songs on it, but avoid too many formats as the vehicle's computer typically recognizes MP3 format. Below is some related information about the Haval Big Dog: 1. Exterior: The Haval Big Dog measures 4620×1890×1780mm in length, width, and height, with a wheelbase of 2738mm. As an SUV, its side profile showcases its rugged appeal. The iconic split waistline and three-dimensional surfaces draw inspiration from Australia's Gold Coast. The dual-tone multi-spoke wheels are highly stylish, offering a visually robust appearance. The addition of side steps, though not highly practical, enhances the vehicle's wild character. 2. Features: The three-spoke multifunction steering wheel and embedded central touchscreen, along with paddle shifters, significantly elevate the tech-savvy ambiance inside the cabin. The full LCD instrument cluster has a unique design, with a separate screen at the top to display gear positions. The overall clarity is excellent, and the UI is straightforward. The central console features a 12.3-inch large screen packed with all necessary functions for daily use. It operates smoothly, is user-friendly, and has a minimal learning curve. Beyond standard features like online music and radio, it also supports video apps, online downloads, and remote FOTA system upgrades, giving users the freedom to download applications as needed.
13
2
Share

Is the DCT Transmission Wet-Type?

DCT stands for Dual Clutch Transmission assembly, which is referred to as DCT regardless of whether it is dry or wet. However, the type of clutch is categorized into dry and wet. Here is an introduction to DCT transmission: DCT Transmission: The main body of a DCT transmission is a manual transmission, which can also be considered an upgraded version of a manual transmission. A DCT transmission has two sets of clutches, primarily responsible for shifting odd and even gears (including neutral gear), respectively. During operation, these two sets of clutch plates alternate to complete the upshifting and downshifting tasks of the DCT transmission. Generates a large amount of heat: During the shifting process, the friction plates of the two clutches generate significant heat due to extensive friction. This is especially true when driving in congested urban areas, where stop-and-go conditions frequently occur, leading to a high frequency of gear shifts. As a result, the vehicle's transmission clutch needs to work continuously, causing the DCT transmission to produce a substantial amount of heat. Here is an introduction to dry and wet clutches: Dry Clutch: Similar to the clutch in traditional manual transmission cars, the friction plates are cooled by air. Wet Clutch: Like the clutch in motorcycles, it has a multi-plate structure, immersed in engine oil, and cooled by oil. During clutch semi-engagement, the heat generation is enormous. Therefore, dry dual-clutch transmissions are prone to severe failures in congested urban environments due to overheating caused by insufficient heat dissipation. In contrast, wet dual-clutch transmissions do not face the risk of overheating, offering much better reliability.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.