Can You Charge in Rainy Days?

1 Answers
Pluto
07/29/25 9:13pm
You can charge in rainy days. Here is the relevant information: 1. Charging port standards: Manufacturers have strict standards for charging components and interfaces, which generally meet IPX6-IPX7 waterproof ratings. This means that under light rain conditions, there will be no damage to components or safety issues. 2. Parking position: When parking, try to choose a higher ground position. If you are in a low-lying position, prolonged water accumulation may cause the battery or charging port to be submerged in water. Check the charging gun before charging to ensure there is no accumulated water or debris inside, and make sure the charging gun and charging port can fully contact for normal charging.
Was this review help?
3
3
Share
More Forum Discussions

What does Michelin ST mean?

Michelin ST on Michelin tires stands for Silent Tuning of Michelin tires. Additional information: 1. Tire noise is often a source of irritation for drivers, and Michelin tires have a relative advantage in this aspect. Michelin places great emphasis on tire noise testing, where the original sounds of the vehicle must be taken into account, and multiple calculations are performed under comprehensive data conditions to determine the noise level of Michelin tires. 2. The tread pattern affects tire noise, with the air gaps between the tread patterns of Michelin tires being a major source of noise. Michelin tires without tread patterns show almost no noise in test vehicles. However, for daily driving, tread patterns with drainage functions are necessary to ensure good traction.
6
0
Share

Why Does the Car Exhaust Pipe Make a Loud Rumbling Noise?

Here are the reasons for abnormal noises from the car exhaust pipe: 1. Exhaust pipe leakage: When there is a leak in the intake or exhaust pipe, the vehicle will produce a loud roaring sound as the exhaust rate increases upon acceleration. 2. Throttle valve clogging: During acceleration, the engine load increases, requiring the throttle valve to open wider and increase fuel supply. If the throttle valve does not open to the optimal position due to clogging, it will result in poor air-fuel mixture ratio in the engine, causing noise during acceleration. Additional information: Apart from roaring sounds, the engine may also produce a humming noise during acceleration. Possible causes for this sound include: 1. Transmission issues. The humming noise during acceleration may not always come from the engine; it could also be due to worn transmission bearings or insufficient lubrication, leading to friction. 2. Engine problems. If the humming noise is indeed from the engine, check if the RPM is very high. If the RPM increases significantly while the vehicle speed rises slowly during acceleration, this usually indicates clutch slippage, requiring replacement of the clutch assembly.
19
4
Share

Where is the license plate Dan K from?

Currently, there is no Dan K license plate, but there is a Jing K license plate, which belongs to Tongzhou District, Beijing. Below is an introduction to the license plate codes for various districts in Beijing: 1. Jing A and L are for Tongzhou District, Jing B and M are for Mentougou District, Jing C, N, and P are for Shunyi District, Jing D and Q are for Huairou District, Jing E and R are for Miyun District, Jing F and S are for Pinggu District, Jing G and T are for Daxing District, Jing H, H, and V are for Changping District, Jing J and W are for Yanqing County, and Jing Y is for the outer suburbs of Beijing. 2. A license plate refers to the vehicle number plate, which is a plate made of aluminum, sheet iron, plastic, or paper, displaying the vehicle's registration number, registration region, or other relevant information, and is affixed to the front and rear of the car.
9
1
Share

Do vehicles need annual inspections after 6 years?

Small vehicles that have reached 6 years of age must undergo annual inspection, which is part of the regular vehicle inspection process. Below is more information about vehicle inspections: 1. Vehicle inspection refers to a mandatory test for all vehicles that have obtained official license plates and registration certificates. It is equivalent to an annual physical examination for the vehicle in accordance with the "Technical Conditions for Motor Vehicle Operation Safety." 2. Vehicle inspections can promptly eliminate potential safety hazards, encourage better vehicle maintenance, and reduce the occurrence of traffic accidents. 3. Vehicle inspections are divided into initial inspections and regular inspections. Initial inspections primarily assess whether the vehicle meets the conditions for obtaining license plates and certificates, while regular inspections are routine safety and technical checks conducted in accordance with the "Regulations for the Implementation of the Road Traffic Safety Law."
12
3
Share

What Causes the Engine Warning Light to Illuminate After Refueling?

If fuel and engine oil are not added according to the manufacturer's requirements, it may cause engine wear, leading to the illumination of the warning light. In such cases, the fuel in the tank should be drained, and the tank thoroughly cleaned. After cleaning, add gasoline that meets the required standards. Apart from fuel quality issues, there are six common factors that can cause the engine warning light to illuminate: Sensor Malfunction: Sensors such as coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors may become damaged, have poor connections, or experience signal interruptions. When the car's ECU cannot accurately obtain engine data, the engine warning light will illuminate. Poor Combustion of Air-Fuel Mixture: Poor combustion can lead to engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as a warning. Issues such as faulty spark plugs, ignition coils, fuel pumps, or clogged fuel lines can cause poor combustion of the air-fuel mixture. Turbocharger Issues: Problems with the intake boost pipes or turbocharger can also trigger the engine warning light. The most common issue is a damaged turbocharger, accompanied by symptoms such as oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake Problems: If the car's intake system is compromised, it may lead to clogged engine pipes, and in severe cases, the engine warning light will illuminate. A dirty or uncleaned air filter can cause intake issues. Exhaust Problems: Exhaust system faults can also trigger the engine warning light. Common causes include faulty rear oxygen sensors, catalytic converters, exhaust camshafts, or bearings. The catalytic converter is the most frequently affected component. Using leaded gasoline, lead- or silicon-based lubricant additives, physical damage to the catalytic converter, or fuel system malfunctions can easily lead to catalytic converter failure. Anti-Theft System Malfunction: If the car's electronic anti-theft system fails or the anti-theft controller does not match the engine's electronic controller, the anti-theft system can prevent the engine from operating normally, causing the engine warning light to illuminate.
1
4
Share

What is the appropriate RPM for an automatic transmission engine?

Automatic transmission engine RPM between 1800 and 2000 is normal. Below is an introduction to automatic transmission: 1. RPM refers to the number of revolutions per minute of the engine crankshaft. The engine RPM relates to the number of work cycles per unit time or the effective power output of the engine. An automatic transmission does not require the driver to manually shift gears; the vehicle will automatically select the appropriate gear based on driving speed and traffic conditions. 2. Method for starting an automatic transmission car: 1. After sitting in the driver's seat, press the start button to turn on the ACC light. 2. Press the start button again for the vehicle to perform a self-check. 3. Press the brake pedal and press the start button to ignite and start the engine. 4. Press the foot brake, shift to D gear, and release the handbrake.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.