···
Log in / Register

Can You Change Lanes on the Fishbone Lines on the Highway?

4 Answers
VanChristopher
08/26/25 3:22am

You cannot change lanes on the fishbone lines on the highway. Here are some precautions for driving on the highway: 1. Fasten your seatbelt: Whether driving on ordinary roads or highways, you should always fasten your seatbelt. Passengers in the rear seats also need to wear seatbelts when driving at high speeds. 2. Drive in the designated lane: Highways have clearly marked lanes, including dedicated lanes for large vehicles, small vehicles, etc. When overtaking, once you occupy a lane, you should promptly return to your own lane after completing the maneuver and avoid occupying other lanes for an extended period. Additionally, the emergency lane should not be occupied for long periods unless under special circumstances. 3. Maintain a safe speed: Speeding, whether on local roads or highways, can lead to irreversible consequences.

Was this review help?
8
5
Share
AlanLee
09/08/25 3:52am

I've been driving for decades, and you must never change lanes on the highway when you see the fishbone markings. These lines are densely arranged, resembling bones, and are specifically designed to remind you that this is a no-lane-change danger zone. I've driven many long distances on highways and often see fishbone markings in sharp curves, steep slopes, or high-traffic areas, mainly to prevent reckless lane changes that could cause side collisions or rear-end accidents. Changing lanes in such areas can easily lead to loss of control, even causing chain-reaction accidents, endangering yourself and others. Traffic laws clearly state that violating lane markings can result in fines of over 200 yuan and penalty points. The principle of safe driving is to stay in your lane when you see fishbone markings, maintain a safe distance, and drive at a steady speed—never take chances. Remember to regularly check your vehicle's condition to ensure the brakes are responsive for emergencies.

Was this review help?
2
1
Share
Expand All
CadenRose
10/22/25 3:56am

Back when I first drove on the highway, I also wondered if lane changes were allowed on those fishbone markings. Later I learned they strictly prohibit lane changes for safety reasons. Fishbone lines are typically high-density designs that create visual pressure on the road surface, warning drivers of high-risk areas like tunnel entrances or sections with poor weather conditions. Out of curiosity, I once considered changing lanes there but quickly realized how dangerous it could be at highway speeds - a slight mistake might cause skidding or rollover with severe consequences. I've even seen news reports of drivers getting fined and penalized for such violations, filled with regret later. My advice to new drivers: pay close attention to road markings, maintain your lane position steadily when encountering fishbone lines, and minimize accident risks. While learning driving knowledge boosts confidence, never violate traffic rules recklessly - safety always comes first.

Was this review help?
12
1
Share
Expand All
McHarrison
12/05/25 4:18am

As someone who has long been concerned about driving safety, I emphasize that changing lanes on highways with herringbone markings is absolutely prohibited. These markings indicate no-passing zones, and lane changes significantly increase the risk of accidents, especially on slippery roads or during poor nighttime visibility. Traffic regulations strictly enforce penalties for violations, such as fines, demerit points, or even recording the offense on driving records. The key point lies in the design intent: the dense herringbone pattern visually guides drivers to focus on straight-ahead driving, avoiding distractions and potential side collisions caused by lane changes. I always remind myself to resist impulsive driving and adhere to the rules to ensure safe travels.

Was this review help?
15
4
Share
Expand All
More Forum Discussions

can you take a range rover through a car wash

Yes, you can take a Range Rover through a car wash, but you must take specific precautions to avoid costly damage. The safest choice is always a touchless (or "brushless") automatic car wash . These facilities use high-pressure water and detergents instead of physical brushes, which eliminates the risk of scratching the paint or damaging exterior components. Before entering any automatic wash, you must manually disable features that can be harmed by the machinery. First, switch the vehicle's air suspension to its lowest or "access" height setting if available. This prevents the system from automatically trying to raise the car if it misinterprets the car wash rollers as an obstacle. Always manually fold in the side mirrors using the button on the door panel. Finally, turn off the automatic windshield wipers and rain-sensing features to prevent them from activating unnecessarily. While modern Range Rovers have a high water resistance rating (typically up to 900mm wading depth), this is for slow, steady water pressure, not the high-intensity jets of a car wash which can force water past seals over time. For a comparison of car wash types suitable for a Range Rover, see the table below. Car Wash Type Risk Level Key Considerations for Range Rover Touchless Automatic Low Safest option; no contact with brushes. Still, disable wipers/suspension. Hand Wash Very Low The ideal method. Allows for careful cleaning of complex body lines. Soft-Cloth Automatic Medium Softer materials but still risk scratching glossy black trim and paint. Tunnel Wash with Brushes High Avoid; stiff brushes can swirl paint and potentially damage roof antennas. DIY Pressure Wash Low Gives you full control. Use a wide-angle tip and maintain a safe distance. The most recommended method is a professional hand wash. This ensures the luxury finish, large alloy wheels, and intricate details are cleaned properly without risk. Regularly going through abrasive automatic washes will lead to micro-scratches (swirl marks) that diminish the vehicle's appearance and value.
12
2
Share

can you sell an abandoned car without a title

Yes, you can sell an abandoned car without a title, but it is a complex process that requires navigating specific legal procedures. The straightforward method of a private sale is not an option because the title is the primary document that proves ownership. Selling a car without one exposes you to significant legal risks. Instead, your path involves establishing legal ownership through your state's Department of Motor Vehicles (DMV) or selling the vehicle as scrap. The most reliable first step is to contact your local DMV. Explain that you are in possession of an abandoned vehicle. They will guide you through your state's specific process, which often involves applying for a bonded title . This is a three-step process: you obtain a surety bond from a bonding company (which acts as an insurance policy for the vehicle), submit an application to the DMV, and after a waiting period (often 3-5 years in some states), you receive a clean title. This is the most authoritative way to gain legal standing to sell the car. If the bonded title process is too lengthy or costly, selling the car for parts or scrap is a viable alternative. Many scrap yards or metal recycling centers will purchase a "title-free" vehicle if you can provide proof that it is legally in your possession. You will need to sign a bill of sale and may need to provide an affidavit explaining how you came to possess the car. They will then issue a destruction permit or similar document, which releases you from future liability. State Common Procedure for Abandoned Vehicles Key Requirement Potential Alternative California Lien Sale Process Notify registered owner for 30+ days Apply for Abandoned Vehicle Title Texas Bonded Title Surety bond worth 1.5x vehicle value Junking with a Junking Receipt Florida Certified Mail to Owner 35-day waiting period after notification Sell to Licensed Automotive Recycler New York MV-907 Abandoned Vehicle Form Proof of storage for 10+ days Auction through Municipality Illinois Uniform Certification of Title Vehicle identification number (VIN) inspection Sell to a Salvage Yard with Bill of Sale Before taking any action, it's critical to run a VIN check to ensure the car isn't reported stolen and has no liens against it. Attempting to sell a car with an active lien or one that is stolen can lead to serious legal consequences. The safest approach is always to work within the framework provided by your state's DMV to transfer ownership legally.
16
3
Share

can you take your property out of a towed car

Yes, you can typically retrieve your personal property from a towed car, but the process is time-sensitive and has specific rules that vary by city and tow yard. The key is to act quickly, as you generally have a limited window to claim your belongings before the vehicle is moved to a long-term impound lot or processed for auction. Your ability to access the car depends entirely on the policies of the towing company and the local law enforcement agency that authorized the tow. The Immediate Steps to Take Your first action should be to locate your vehicle. Call the non-emergency number for the local police department or check their online database. They can provide the name, address, and phone number of the impound lot. Contact the lot immediately to confirm they have your car and, most importantly, ask about their personal property retrieval policy . Some lots allow access the same day, while others may require an appointment. What to Expect at the Impound Lot Once you arrive at the tow yard, you will need to provide proof of identity (like a driver's license) and proof of ownership for the vehicle (registration or title). There is often a fee for the property retrieval, which is separate from the towering and storage fees you'll need to pay to get the car back. This fee is typically an "after-hours" or "gate fee" if you're not retrieving the entire vehicle. An attendant will usually accompany you to your car to supervise while you remove your belongings. They are there to ensure you only take personal property and not any parts of the car itself. It's crucial to be prepared and efficient; you may only have a short amount of time to collect your things. Common Towing & Impound Scenarios Typical Property Retrieval Policy Street Parking Violation Often allows property retrieval within 24-48 hours. Accident Scene Tow May have delays due to police investigation or insurance holds. Private Property Tow (e.g., apartment lot) Policies vary widely; some are more restrictive. Vehicle Involved in a Crime Property access will be denied until police release the vehicle. If your car was towed from an accident scene or is part of a police investigation, access will be severely restricted until the authorities clear it. In these cases, your best bet is to get a case number from the police and stay in contact with your insurance adjuster, who can sometimes help facilitate the process.
19
1
Share

can you start car with jumper cables attached

Yes, you can start a car with the jumper cables attached, but it is a critical safety step that must be done correctly. The proper sequence is to start the donor car first, then attempt to start the dead car. Leaving the cables connected allows the dead battery to draw power from the donor car's running alternator, providing the necessary boost. The main risk of starting the dead car with cables connected is the potential for a voltage spike when the donor car is disconnected. A running car's electrical system, powered by the alternator, operates at around 13.5 to 14.5 volts. When you disconnect the jumper cables, especially if the recently jumped car's battery is still weak, a sudden change in electrical load can cause a brief but significant voltage spike. While modern vehicles have robust electrical systems, a severe spike could potentially damage sensitive electronic control units (ECUs), infotainment screens, or other expensive components. The correct procedure is methodical. After confirming a secure connection (positive to positive, negative to a grounded engine bolt), start the donor car and let it run for a few minutes. This allows its alternator to begin supplying a stable charge. Then, start the disabled vehicle. Once it's running smoothly, it's crucial to carefully disconnect the cables in the reverse order of connection: first remove the negative clamp from the jumped car's ground, then the negative from the donor car, followed by the positive from the jumped car, and finally the positive from the donor car. This sequence minimizes the chance of a dangerous spark near the battery. Leaving the jumped car running for at least 15-20 minutes is essential to allow its own alternator to recharge the battery sufficiently for the next start. Common Jumper Cable Connection Scenario Voltage Reading (Approx.) Risk Level Recommended Action Donor car engine off, cables connected 12.4V - 12.6V (both batteries) Low Proceed to start donor car Donor car running, cables connected 13.5V - 14.5V at donor side Medium Proceed to start dead car Both cars running, cables connected 13.5V - 14.5V across both Medium-High Disconnect cables carefully Voltage spike upon disconnection Can exceed 15V momentarily High Use correct disconnection sequence Weak battery in jumped car Drops below 12V quickly after jump High Drive car for extended period to recharge
13
5
Share

can you start the car when car battery is wet

Yes, you can typically start a car with a wet battery, but you must proceed with caution. The primary concern isn't the water itself—modern battery cases are sealed—but the potential for corrosion or conductive paths that could lead to a short circuit . The key is to ensure the battery terminals and surrounding cables are clean and dry before attempting to jump-start or charge the battery. If the battery was submerged, it's critical to check its condition first. The main risk involves the electrical connections. If the battery terminals or cable clamps are covered in a bluish-white, powdery substance (corrosion), and they get wet, the moisture can create a path for electricity to flow where it shouldn't. This can cause the cables to heat up rapidly, potentially damaging the battery and electrical system, or even creating a fire hazard. This is why inspecting and drying the terminals is the most important step. For a safe start after a battery gets wet: Wear safety glasses and gloves. Battery acid is corrosive. Visually inspect the battery. Look for any cracks or leaks. If the case is damaged, do not attempt to start the car; replace the battery. Disconnect the battery cables (negative cable first, then positive). This isolates the battery and prevents any accidental short circuits. Dry the battery and terminals thoroughly. Use a clean cloth or paper towels. For stubborn moisture, a can of electrical contact cleaner is effective and safe. Clean any corrosion from the terminals and cable clamps with a mixture of baking soda and water and a wire brush. Reconnect the cables (positive first, then negative), ensuring they are tight. Attempt to start the car. If it starts, let the engine run to allow the alternator to recharge the battery. If the car doesn't start, the battery may have been discharged or damaged before it got wet. In this case, a jump-start or professional assessment is needed. Scenario Risk Level Recommended Action Key Consideration Light rain/splash on sealed battery Low Dry terminals with a cloth, then start normally. Modern batteries are designed to resist minor moisture. Battery terminals are corroded and wet High Clean and dry terminals thoroughly before any connection. Wet corrosion greatly increases short-circuit risk. Battery fully submerged in water Medium-High Inspect for damage, dry completely, and test voltage before use. Submersion can compromise seals over time. Battery case is cracked or leaking Extreme Do not attempt to start. Replace the battery immediately. Exposed acid is hazardous and can cause injury. Using a jump starter on a wet battery High Connect jumper cables to the vehicle's chassis, not the battery, if possible. This bypasses the potentially hazardous battery terminals.
13
5
Share

can you take a drivers test with a rental car

Yes, you can often take a driver's test with a rental car, but it's not a simple yes or no answer. The possibility depends entirely on the specific policies of the rental company and the requirements of your local DMV (Department of Motor Vehicles). The biggest hurdle is that most major rental car companies explicitly prohibit the use of their vehicles for driving tests in their rental agreements. This is primarily due to liability concerns, as the company would be responsible if an accident occurred during the test. Before you even consider this route, your first step must be to call the rental company directly and ask about their policy. Don't rely on online information, as policies can vary by location. If you find a company that allows it, you will need to provide proof that the vehicle is properly insured and registered, which the rental company should handle. The vehicle must also meet all the DMV's criteria, which typically include a valid license plate, working seat belts, turn signals, brake lights, and no warning lights on the dashboard. A much more reliable alternative is to use a car from a driving school. Instructors are accustomed to providing vehicles specifically equipped for tests, often with a second set of brakes for safety. If that's not an option, borrowing a car from a friend or family member is usually the next best choice, provided they are present with their insurance and registration documents. Using a rental car is often the most complicated and uncertain path to take your driver's test.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.