Can You Change a Spare Tire on the Highway?

2 Answers
Marcus
07/24/25 10:04am
You can change a spare tire on the highway, but it must be done in the emergency stopping lane with warning signs set up. Here are the precautions for changing a spare tire on the highway: 1. When parking: If the vehicle breaks down and must stop, immediately pull over to the right hard shoulder or emergency stopping lane and turn on the hazard warning lights. If it's nighttime, don't forget to turn on the side marker lights and tail lights. 2. Set up warning signs: Set up warning signs, commonly known as triangle warning signs. They are usually stored in three places in the car: the trunk, the inside of the trunk lid, or under the trunk cover. Take the warning sign, face the reflective side outward, walk in the direction of oncoming traffic, and place it 150 meters away in the corresponding lane. 3. Evacuate: Immediately move to the outside of the right guardrail and call the national highway emergency rescue number 12122 for assistance.
Was this review help?
12
3
Share
VanClayton
08/11/25 5:18am
Changing a spare tire on the highway? Personally, I think it's too dangerous. Having driven for twenty years, I've seen too many highway accidents. When stopping to change a tire, rear vehicles may not see clearly and are prone to rear-end collisions, especially in heavy traffic or bad weather. After a tire blowout, first stabilize the steering wheel, slowly drive onto the shoulder, turn on hazard lights, then place a warning triangle 50 meters away to ensure personal safety. It's recommended to drive directly to the nearest exit or service area to change the tire. Remember, a spare tire is only for temporary use—don't exceed 80 km/h. Prevention is better: check tire pressure and wear monthly, carry a mobile phone backup power source to call for help like AAA services anytime. Safety first is far more important than rushing, avoiding fines or secondary accidents.
Was this review help?
1
2
Share
Expand All
More Forum Discussions

Is the motorcycle license plate transferred together during ownership transfer?

Motorcycles can be transferred, but the license plate cannot. The motorcycle license plate cannot be transferred to another person. During the ownership transfer, the vehicle management office will cancel the original license plate and registration certificate, and issue new ones to the new owner. If the original owner has held the motorcycle license plate for more than 3 years, they can apply to retain the plate during the transfer. During the retention period, if the owner purchases a new vehicle, they can also apply to use the retained license plate. According to traffic management regulations, license plates are considered national public property and do not belong to any individual or group. Vehicle owners only have the right to use the license plate, not ownership rights, so the plate cannot be transferred with the vehicle. Documents required for vehicle transfer: vehicle registration certificate; motor vehicle registration certificate; motor vehicle registration supplementary form; vehicle purchase tax certificate; ID cards and household registration books of both buyer and seller. For non-local residents, a residence permit is required, and the buyer's residence permit must be valid for at least one year. Precautions for motorcycle ownership transfer: If you plan to buy a used motorcycle, you should have a good understanding of its documentation. Some consumers may choose to buy motorcycles with incomplete or non-transferable documents to save money, but this can be disadvantageous for both buyer and seller. Motorcycle odometers are mainly divided into mechanical and electronic types. Mechanical odometers operate based on gear rotation principles, and the readings can be easily adjusted by manipulating the gear. Electronic odometers are harder to tamper with, but it's not impossible. Many people tend to judge the previous owner's usage based on the vehicle's age and mileage, which is a reasonable approach. However, the odometer reading alone should not be the sole criterion for evaluating the vehicle's condition, as it can be altered. It's advisable to remain cautious. One of the most commonly overlooked issues when buying a used motorcycle is the ownership transfer process. Many owners skip the transfer process for convenience, leading to difficulties in using or claiming insurance for the motorcycle later on. Therefore, it's recommended to complete the ownership transfer as soon as possible after purchasing a used motorcycle, as this will give you more autonomy in matters like registration and other procedures.
13
1
Share

What is the battery model for the Lavida key?

The battery model for the Lavida key is CR2032. CR2032 is a lithium manganese dioxide battery, named according to the IEC standard. The naming convention is as follows: C - Indicates a chemical battery system with lithium metal as the negative electrode and manganese dioxide as the positive electrode. R - Indicates that the battery is cylindrical in shape; if it were square, it would be denoted by F. 20 - Indicates the battery diameter is 20mm. 32 - Represents the battery height of 3.2mm. The nominal voltage is 3.0V, the endpoint voltage is 2.0V, and the rated capacity varies between 200-240mAh depending on the manufacturer's specifications. The shelf life of a CR2032 battery is typically 5 years. However, if the manufacturing quality is poor or quality control is inadequate, the lifespan can be significantly shorter. Domestic first-tier brands can generally ensure this lifespan. Under ideal conditions (sealed, room temperature, no moisture, etc.), the lifespan can extend up to 8 or even 10 years. Generally, replacing a car key battery involves the following three steps: Step 1: Remove the mechanical key. Press the lock button on the side of the smart key to remove the mechanical key. Step 2: Open the battery cover. After removing the mechanical key, you will see a deep slot and a shallow slot at the top of the smart key. The deep slot is for the keyhole, while the shallow slot is used to open the battery cover. Insert the mechanical key into the shallow slot and pry it outward to open the battery cover. Once opened, you will see the coin cell battery. Gently pry it out to remove the battery. Step 3: Replace the battery. Insert the new battery, reattach the battery cover, and then reinsert the mechanical key. The key battery replacement is now complete.
6
3
Share

What are the reasons for the right side being too narrow or crossing the line when reversing into the right parking space?

The reason for the right side being too narrow when reversing into the right parking space is turning the steering wheel too early, while the reasons for crossing the line include the starting point of the right parking space being too far from the left edge of the parking area, turning the steering wheel to the right too early at the starting point, not accurately hitting the point for turning the steering wheel, misjudging the 30 cm distance for reversing into the parking space, adjusting the direction too late, or driving too fast. The earlier you turn the steering wheel, the narrower the right side of the vehicle will be when entering the parking space. In this case, you need to straighten the steering wheel to adjust the angle of the vehicle and then reverse it into the parking space. If this happens during the Subject 2 test, make sure not to stop the vehicle. Before reversing, observe the surrounding environment for any obstacles. During the reversing process, control the speed and pay attention to the sides of the vehicle. Adjust the distance between the vehicle and the side line. Before entering the parking space, the distance between the vehicle and the roadside line should be about 1.5 to 2 meters. If the distance is too small, it may cause the front of the vehicle to cross the line when turning the steering wheel fully to enter the parking space. If the distance is too large, it may make it difficult or even impossible to enter the parking space.
9
5
Share

What is the appropriate tire pressure for Audi Q5L?

The standard tire pressure for Audi Q5L is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard requirements. If you want to check the current tire pressure of your Audi Q5L during daily driving, you can activate the tire pressure monitoring system, and the tire pressure value will be displayed on the central LCD screen of the instrument panel. The specific method is to press the LCD adjustment button on the left combination instrument of the steering wheel to switch to the tire pressure monitoring system interface. Generally speaking, a tire pressure exceeding 2.8 bar is considered too high, while a tire pressure below 2.0 bar is too low. Hazards of excessive tire pressure: Reduced tire friction and adhesion, affecting braking performance; causing steering wheel vibration and deviation, reducing driving comfort; accelerating wear on the central tread pattern of the tire, shortening tire lifespan; increased body vibration, indirectly affecting the lifespan of other components; excessive stretching deformation of tire cords, reducing tire elasticity, and increasing the load on the vehicle during driving. Hazards of insufficient tire pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; causing heavy steering and deviation, which are unfavorable for driving safety; increased movement of various parts of the tire, leading to abnormal overheating due to excessive rolling; reduced functionality of cords and rubber, causing delamination or cord breakage and excessive friction with the rim, damaging the tire bead area and causing abnormal wear; multiplied friction between the tire and the ground, rapidly increasing tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may lead to tire blowouts. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes below, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: Usually, an alarm is triggered when the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the tire pressure monitoring indicator light to come on. Simply reset the tire pressure to resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, used to monitor tire pressure, is directly installed inside the tire and connected to the tire inflation port. If the sensor is damaged during driving, it will also cause the tire pressure fault light to come on. For sensor damage issues, only replacement with a new part is possible.
18
3
Share

What does TDI mean?

TDI stands for Turbocharged Direct Injection. Many turbocharged engines and naturally aspirated engines are equipped with direct injection technology. In engines with direct injection technology, the fuel injector is located inside the cylinder. This injection method allows for more thorough atomization of gasoline, ensuring better mixing with air. Engines with direct injection technology generally deliver stronger power compared to those with multi-point electronic fuel injection. Some vehicles' engines may also feature hybrid injection technology, which combines both direct injection and multi-point electronic fuel injection. Hybrid injection technology is superior as it allows the engine to use different injection methods under various operating conditions, thereby improving fuel economy and power output.
13
1
Share

Which car has a logo with five vertical lines?

The car with a logo featuring five vertical lines is the WM Motor, a manufacturer specializing in pure electric vehicles. Taking the WM EX5 as an example, it is positioned as a pure electric intelligent SUV model. In terms of body dimensions, the WM EX5 measures 4585mm in length, 1835mm in width, and 1672mm in height, with a wheelbase of 2703mm. Exterior-wise, the sharp lines on the tailgate of the WM EX5 outline a dynamic style, and the steeply raked rear windshield visually enhances the sporty feel. The WM EX5 boasts a maximum range of up to 520 kilometers.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.