Can You Bring a Cushion for the Subject 2 Driving Test?

1 Answers
LukasRose
07/29/25 8:04am
You are allowed to bring a cushion for the Subject 2 driving test. Here are the reasons why bringing a cushion is permitted: Convenience for shorter individuals: If you are not tall enough and the test vehicle at the driving school cannot be adjusted for height, bringing a cushion to the test site is allowed. Not an electronic device: As long as the cushion does not contain any electronic components that could interfere with the test equipment, it is permissible. Before taking the Subject 2 test, be sure not to wear colored glasses, hats, gloves, scarves, ear muffs, etc. Long hair should not cover the eyebrows, eyes, or other major facial features, and the sun visor inside the car should not be lowered to avoid obstructing the video camera. Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skills test. The test items include: Reverse parking into a garage: Once from the right starting point into the garage, then drive to the left and reverse into the garage, and finally return to the starting point. No stopping is allowed during the reverse parking process. Parallel parking: Drive the vehicle to a position parallel to the garage in the forward direction, then reverse into the garage to the right rear without any pauses. 90-degree turn: Do not cross the line, and complete the turn in one go without stopping. Hill start and stop: The examinee must drive to the hill start test point, and the front wheels must stop on the designated line. After passing this part, the examinee will be tested on starting on a slope without rolling backward. Any mistake will result in point deductions or even failure. Curve driving: This involves a lane with two turns greater than 40 degrees, which must be completed in one go without stopping, crossing the line, or going out of bounds. The full score is 100 points, with criteria for failure, 20-point deductions, 10-point deductions, and 5-point deductions. A score of 80 or above is required to pass. Important notes for the Subject 2 test: During the Subject 2 test, maintain a good mindset. Wear loose and comfortable clothing, avoid excessive nervousness, and familiarize yourself with each step of the test. For example, after entering the car, adjust the seat first, and only after ensuring everything is correct should you fasten the seatbelt and begin the test. Keep the speed steady during the Subject 2 test, avoid crossing the lines within the test items, aim accurately at the reference points, and perform each test item correctly. After passing the test, drive the car back to the starting position, confirm and sign, and then turn off the engine.
Was this review help?
4
4
Share
More Forum Discussions

What Causes a Sedan to Lack Power and Fail to Accelerate When Climbing a Slope?

The reasons why a sedan lacks power and fails to accelerate when climbing a slope are: 1. Excessive carbon buildup in the vehicle; 2. Poor fuel quality; 3. Blocked intake or exhaust system; 4. Worn-out spark plugs; 5. Cylinder misfire; 6. Insufficient tire pressure; 7. Insufficient engine power; 8. Problems with the combustion chamber, ignition system, or valves; 9. Dirty fuel filter, damaged fuel pump, or clogged catalytic converter. Solutions to address a sedan's lack of power and failure to accelerate when climbing a slope include: 1. Cleaning carbon deposits; 2. Using high-quality gasoline; 3. Replacing spark plugs; 4. Regularly checking tire pressure; 5. Periodically cleaning the fuel filter; 6. Inspecting the fuel pump.
6
2
Share

Will the Prado meet China VI emission standards?

The Prado will not meet China VI emission standards due to the total emission restrictions under China VI, which are not suitable for large-displacement SUVs. Taking the 2010 Prado as an example, its body dimensions are: length 4820mm, width 1885mm, height 1845mm, wheelbase 2790mm, minimum ground clearance 220mm, and fuel tank capacity 87L. The 2010 Prado is equipped with a 2.7L naturally aspirated engine, with a maximum horsepower of 163ps and a maximum power of 120kw, paired with a 5-speed manual transmission. It uses a double-wishbone independent front suspension and a four-link solid axle non-independent rear suspension.
2
5
Share

How to Properly Set Up a Dash Cam?

To correctly set up a dash cam: 1. Assemble the dash cam with its mounting bracket; 2. Use the suction cup on the bracket to attach it to the front windshield near the rearview mirror; 3. Connect one end of the power cable (USB port) to the dash cam and the other end to the cigarette lighter; 4. After installation, turn on the dash cam and set the parameters to Simplified Chinese; 5. Configure the time, video resolution, and audio recording. A dash cam is a device that records video and audio information during vehicle operation, capturing the entire driving process to provide evidence in case of traffic accidents.
19
4
Share

What are the reasons for the ABS warning light to come on?

ABS warning light comes on due to a fault in the anti-lock braking system. The possible reasons for the ABS warning light to come on include: 1. Faulty wheel speed sensor; 2. Faulty wheel speed sensor wiring. The methods to reset the ABS warning light are: 1. Visit a repair shop to have it cleared with a computer; 2. Locate the car battery, disconnect the negative terminal, and reconnect it after a few minutes. ABS stands for Anti-lock Braking System, and its functions are: 1. Automatically controlling the braking force during braking to effectively keep the wheels in a rotating state; 2. Improving the stability of the car during braking and the braking performance on poor road conditions.
9
1
Share

What is the function of the 'off' button in a car?

The 'off' button in a car refers to the switch that turns off the vehicle stability control system. The working principle of the vehicle stability control system is as follows: when the vehicle is making a quick turn, dodging, or avoiding a suddenly appearing car or animal, if the vehicle slides outward due to understeer or crosses the centerline of the road or even spins in place due to oversteer, the system uses a computer to control the engine output and apply brakes to any wheel, thereby eliminating understeer or oversteer and improving the dynamic stability of the vehicle. When the car is powered on, the vehicle stability system is enabled by default. Press and hold the 'off' button to turn off the vehicle stability system.
3
4
Share

How to Defog a Toyota Corolla?

Toyota Corolla's defogging steps are: 1. Turn on the car's air conditioning; 2. Adjust the air conditioning to the warm air setting; 3. Turn on the car's external circulation; 4. Press the front and rear defogging buttons, and use warm air to complete the defogging. Taking the Toyota Corolla 2021 model as an example, its body dimensions are: length 4635mm, width 1780mm, height 1455mm, with a wheelbase of 2700mm. The Toyota Corolla 2021 model is equipped with a 1.2T turbocharged engine, with a maximum horsepower of 116ps and a maximum power of 85kw, matched with a continuously variable transmission.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.