Can You Add 95 Octane Gasoline After Using 98 Octane?

2 Answers
LaEmilia
07/24/25 10:33am
You can add 95 octane gasoline after using 98 octane, but this should only be done in emergencies and not for prolonged mixed use. Here is more information about gasoline: 1. The meaning of gasoline octane ratings: Different octane ratings indicate different levels of octane numbers, with higher octane ratings offering better anti-knock performance. 2. Reasons why different octane gasoline can be temporarily mixed: Although 95 octane and 98 octane gasoline have different additives and chemical compositions, occasional mixing will not cause significant harm to the car. If you mix different octane gasoline in an emergency, there is no need to worry—just refill with the appropriate octane gasoline later. 3. Hazards of prolonged mixed use: Prolonged mixing of different octane gasoline can damage the car's ignition system, fuel injectors, and spark plugs.
Was this review help?
19
4
Share
NolanMarie
08/11/25 5:37am
I remember struggling with this issue last time I drove my friend's sports car. Actually, occasionally mixing different octane gasoline isn't a big problem, especially when downgrading from 98 to 95 octane. The ECU will automatically adjust the ignition timing based on the knock sensor to prevent engine knocking. However, long-term mixed use isn't good for the engine, especially for high-performance cars with high compression ratios, as it can easily lead to increased carbon deposits and higher fuel consumption. It's fine for emergency use once or twice, but try to refill with higher octane next time. The fuel filler cap usually has the recommended octane rating sticker - following the manufacturer's recommendation is the safest approach.
Was this review help?
2
3
Share
Expand All
More Forum Discussions

Can the car battery still be used after being depleted twice?

Under normal circumstances, it can still be used. Here is relevant information: 1. Introduction: A car battery is a type of storage battery that converts chemical energy into electrical energy. The commonly referred car battery is a lead-acid battery, which mainly uses lead and its oxides as electrodes and sulfuric acid solution as the electrolyte. 2. Classification: Ordinary battery, dry-charged battery, maintenance-free battery. 3. Principle: Uses lead plates filled with sponge lead as the negative electrode, lead plates filled with lead dioxide as the positive electrode, and 22-28% dilute sulfuric acid as the electrolyte. During charging, electrical energy is converted into chemical energy, and during discharging, chemical energy is converted back into electrical energy.
11
0
Share

Why is the car unstable at high speed?

Car instability at high speed can be caused by uneven tire tread patterns, front shock absorber failure, or excessive wear. Below are the specific reasons for car instability at high speed: Uneven tire tread patterns: It is best to use the same type of tires for the entire vehicle. At the very least, the two tires on the front axle and the two on the rear axle must be the same, and the tread depth must be identical. Tires exceeding the wear limit must be replaced. Front shock absorber failure: After the front shock absorber fails, the two suspensions will be uneven in height during driving, leading to uneven force distribution and causing the car to pull to one side. A dedicated shock absorber tester can be used to check the absorption level of the shock absorber, determine its condition, and facilitate timely repairs. Excessive wear: Excessive wear of vehicle chassis components can result in abnormal gaps. Common parts prone to excessive gaps include tie rod ball joints, control arm bushings, and stabilizer bar bushings. The vehicle should be lifted for a thorough inspection. Additionally, incomplete brake release on a single tire can also cause the car to pull to one side.
4
2
Share

Why is the thermometer light on the car dashboard flashing?

When the thermometer light on the car dashboard flashes, it indicates that the coolant temperature is not within the specified range. Below are the reasons and solutions for the flashing thermometer light on the car dashboard: Reasons for the flashing thermometer light on the car dashboard: It indicates that the engine coolant temperature is too high or the engine is low on coolant. There may be a leak in the engine cooling system, such as a water pump leak, damaged pipes, or a damaged radiator, etc. You should immediately slow down, pull over, and check the coolant level. The warning light will automatically turn off once the engine temperature returns to normal or the coolant is replenished. Solutions for the flashing thermometer light on the car dashboard: If the engine overheats, do not turn it off immediately. Instead, keep the engine idling for a while and try to lower the engine temperature. Wear gloves, place a wet cloth over the engine radiator, or wrap a wet cloth around the radiator cap and gently unscrew it. Wait for the steam to slowly escape from the radiator, and once the pressure decreases, add cool water or antifreeze.
19
1
Share

What is the fuel consumption of the Great Wall M6?

2019 Haval M6 has a real fuel consumption of around 9L/100km. As a compact SUV under the Haval brand, the Haval M6 is equipped with a 1.5T turbocharged engine across the entire lineup, with exhaust emissions meeting the China VI emission standards. It features high configuration, spacious interior, and strong safety. Here is additional information: Introduction to Haval: The Haval M6 basically continues the excellent performance of the old H6 in terms of body size. The length, width, and height of the body are 4649/1830/1705mm respectively, with a wheelbase of 2680mm. The rear seats of the M6 can be folded down in a 4/6 ratio. The trunk itself has a volume of 808L, which can be expanded to 2010L when all seats are folded down, meeting consumers' travel and large space loading requirements.
4
0
Share

How to break in a new Audi A6L?

During the break-in period, do not exceed 150 km/h and avoid sudden acceleration or hard braking. Additionally, do not use the new car to tow other vehicles, as this can cause damage. After driving approximately 1,500 kilometers, the car can be used normally. Also, the new car's tires and brake pads require a break-in period. Here is additional information: Meaning of the break-in period: The break-in period generally refers to the initial process where mechanical components come into contact, friction, and meshing during operation. In modern usage, it often describes the time when two things or organizations become familiar with and adapt to each other's internal operations. It can also describe the initial stage of a relationship or marriage, where mutual contact and familiarity develop.
16
0
Share

What brand of tires does the Baojun 510 use?

The Baojun 510 base model is equipped with Linglong brand tires, while the higher-end models feature Linglong, Kumho, and Giti brands. These tires belong to the mid-to-high-end segment, offering excellent performance, outstanding handling, and good comfort. They utilize advanced low-noise technology for quiet operation, combining low rolling resistance materials and structures to reduce tire rolling resistance and lower overall vehicle fuel consumption. Here is additional information: Baojun 510 tire specifications: The Baojun 510 comes with the same tire specifications across all variants, with both front and rear tires sized at 205/60R16, which is sufficient for normal commuting. Notably, all Baojun 510 models come with a full-size spare tire, demonstrating Baojun's strong commitment and solidifying its reputation as a conscientious automaker.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.