Can Windshield Scratches Be Repaired?

2 Answers
VonLilah
07/28/25 10:20pm
Windshield scratches can be repaired using the following methods: 1. For small and shallow scratches, they can be removed through polishing; 2. Glass scratch repair agent: Slowly apply the gel along the crack in the glass, patience is key to avoid uneven surfaces that are particularly noticeable under sunlight; 3. Professional repair shop services; 4. Toothpaste for scratch removal: Apply a small amount of toothpaste to the scratch, wipe with a soft cloth, then rinse with water. Toothpaste can effectively repair minor scratches and also helps prevent rust. Notes for car glass scratch repair: 1. Maintain a certain amount of water throughout the process to prevent overheating of the glass surface and gas formation; 2. When using white polishing paper, ensure the slurry does not dry out to avoid creating new scratches.
Was this review help?
8
2
Share
DelRuth
08/12/25 2:51am
I've noticed many friends asking about windshield scratches. Actually, you can determine repairability by checking the scratch depth. Those fine hairline scratches can be completely polished out - I use professional equipment to remove the surface layer of glass, making it crystal clear like new. Medium-depth scratches can also be fixed by filling with resin and then sanding smooth. However, if it's deep enough to catch your fingernail, it's basically hopeless - forcing a repair might actually cause the glass to crack. My advice: don't attempt DIY fixes, just spend 100-200 yuan at a professional shop. Important reminder: windshields have an inner UV-protective coating - using sandpaper recklessly will damage this coating and further impair visibility.
Was this review help?
20
3
Share
Expand All
More Forum Discussions

At how many kilometers should the third car maintenance be performed?

The third maintenance for a vehicle is generally required at around 18,000 kilometers. The items for the third car maintenance include: 1. Changing the engine oil and oil filter. 2. Checking whether the oil filter element, air filter element, gasoline filter element, air conditioning filter element, and transmission oil filter element need replacement. 3. Adding windshield washer fluid, antifreeze, and air conditioning refrigerant if insufficient. 4. Inspecting the drive belt for wear. 5. Cleaning the throttle valve and carbon deposits in the cylinders. 6. Checking the chassis for damage. 7. Inspecting the body and tires. The benefits of car maintenance include: 1. Ensuring the vehicle's optimal performance condition. 2. Enhancing driving safety. 3. Reducing engine noise. 4. Extending the vehicle's service life.
7
0
Share

Why does the car smell like gasoline after refueling?

It may be due to a blocked gasoline vent hole. Next to the fuel filler hole, there is a vent hole for gasoline vapors. Its function is to maintain the pressure in the fuel tank higher than atmospheric pressure when the temperature rises, causing gasoline to evaporate into vapors, thus preventing the engine from stalling. When this vent hole is blocked, the evaporated vapors cannot be released and may escape elsewhere, leading to a gasoline smell inside the car. More details are as follows: 1. Therefore, when there is a gasoline smell in the car, you can use compressed air to blow into the vent hole. If the vent hole is clear, you should hear the sound of air flowing out from the fuel filler hole. 2. Sometimes, the gasoline smell inside the car is caused by a cracked fuel line, improperly closed fuel tank cap, leaking fuel injector, incomplete engine combustion, etc. Other possible situations for a gasoline smell inside the car include: 1. Poor sealing of the fuel tank cap, which may require replacement or applying a 1mm thick layer of grease under the rubber gasket; 2. Fine cracks or damage in the fuel supply line; 3. Gaps at the connection between the fuel line and the fuel tank (clamp not tightened properly).
6
4
Share

How to Replace the Transmission Fluid for a 2015 Ford Escort 6AT?

Regarding the method for replacing the transmission fluid of a 2015 Ford Escort 6AT, the steps are as follows: 1. Gravity Drain. Use tools to loosen the nut, and the transmission fluid will automatically flow out under gravity. This method is the most common and easy to operate, but it cannot completely drain the transmission fluid. In the grooves and recesses of the machinery, the transmission fluid often cannot be discharged. 2. Machine Circulation Replacement. Add new transmission fluid to the circulation machine, connect the transmission's fluid circuit interface to the circulation machine. The function of the circulation machine is to push out the old fluid with the new one, replacing the old with the new. This method cleans the fluid circuit more thoroughly. 3. Remove the Oil Pan for Replacement. Clean directly from the source, which is more thorough, and the transmission fluid filter can also be cleaned at the same time.
15
3
Share

How long is the validity period of the driving skill test permit?

The validity period of the driving skill test permit is three years. Here are the relevant details: 1. After passing the subject one test, the vehicle management office should issue a learning driving permit within one day. The learning driving permit is valid for three years, and the applicant must complete subject two and subject three tests within the validity period. 2. If the tests are not completed within the validity period, the passed subject results will be invalidated. 3. Extensions cannot be applied for. If the applicant fails to pass all the driving license tests within the validity period, the public security department will cancel the applicant's student status, and the applicant must re-register for training and start the tests from the beginning.
6
0
Share

What Are the Uses of Wheel Alignment?

There are four main uses: tire benefits, improved handling, fuel savings, and safety assurance. Below are detailed explanations of the uses of wheel alignment: 1. Tire Benefits As the name suggests, wheel alignment primarily offers significant benefits to the tires. After performing a wheel alignment, the tires and the vehicle body maintain the optimal angle, ensuring both improved grip and comfort. Of course, if abnormal vehicle conditions are ignored and wheel alignment is not performed, it can greatly impact safety and significantly reduce tire lifespan. A single tire can cost anywhere from a few hundred to several thousand yuan, so neglecting tire care can lead to substantial financial losses. 2. Improved Handling Maintaining the tires in optimal condition naturally contributes to driving safety. After wheel alignment adjustments, driving control is correspondingly enhanced. Particularly in emergencies, sufficient tire grip ensures the vehicle follows the driver's intended path as closely as possible. While emergencies are rare, driving inherently carries risks. Being able to make timely judgments in critical moments can greatly enhance safety. 3. Fuel Savings Fuel consumption decreases as the rolling friction coefficient of the tires is reduced, which is self-evident. After wheel alignment adjustments, the vehicle travels along the correct trajectory, reducing wind resistance to some extent and consequently lowering fuel consumption. Combined with maintaining standard tire pressure, the tires not only achieve optimal grip but also minimize friction with the ground, delivering dual benefits. 4. Safety Assurance Good tires mean a better-performing vehicle and significantly improved safety. During wheel alignment adjustments, technicians also inspect the vehicle's suspension system and other components. This inspection helps determine whether the tires are adversely affecting the chassis system. If abnormalities are detected, both the tires and the chassis can be optimized, allowing early identification of wear and tear on related parts and timely elimination of potential safety hazards.
15
0
Share

How to Coordinate the Car Accelerator and Clutch?

The coordination method between the accelerator and clutch is as follows: 1. During the starting phase, place the gear in neutral. After starting, depress the clutch pedal, shift the gear lever into first gear, and slowly release the clutch while coordinating with the accelerator pedal to ensure a smooth vehicle start. 2. The two key operations in coordinating the clutch and accelerator are applying the accelerator fully at once and reaching the clutch contact point at once. The accelerator should be applied slightly earlier than reaching the contact point. 3. Note: Always fully depress the clutch pedal before shifting gears. When depressing the clutch pedal, the accelerator pedal should be released quickly. If the gear does not shift smoothly, first release the clutch, depress it again, and then shift. Never force a gear shift.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.