Can Wet Dual-Clutch Transmissions Wade Through Water?

What Type of Fuel Should a China VI Standard Vehicle Use?

China VI models only refer to vehicles whose emissions of various pollutants meet the China VI limit requirements, and the type of fuel used is irrelevant. Simply follow the vehicle's manual for fuel recommendations. Below is relevant information about China VI standards: 1. Concept: The term 'China VI' means that a vehicle's emission standards meet the requirements specified in the sixth phase of the national emission standards, commonly abbreviated as China VI emissions. This standard began to be implemented gradually from the end of 2019. China's vehicle emission standards are modeled after European emission standards, with the latest being the China VI emission standard. The sixth phase imposes stricter regulations, significantly reducing the levels of various harmful gases. 2. Emission Standards: These regulations specify the permissible levels of harmful gases emitted from vehicle exhaust, including carbon monoxide, hydrocarbons, nitrogen oxides, and particulate matter. The purpose of setting vehicle emission standards is to curb the production of these harmful gases, encouraging automobile manufacturers to improve emission standards and reduce the generation of harmful gases.

12

4

Share

Can the green vehicle registration book be reissued if lost?

The green vehicle registration book can be reissued if lost. You can apply for a reissue at the vehicle management office where the vehicle registration certificate was originally processed. Definition: The vehicle management office is a direct agency under the public security system, primarily responsible for handling motor vehicle registration, modification, transfer, mortgage, and cancellation. It is generally available only at the county level or higher administrative regions. Job Supervision: Each motor vehicle and driver's license service position in the vehicle management office has the obligation to supervise the work of the previous position. If any issues are found, such as questionable procedures handed over from the previous position, violations in processing, or non-standard filling of certificates and forms, or failure to sign and stamp as required, they should be reported to the supervisory position. The supervisory position should immediately investigate and handle the issue and keep a record of the handling.

19

5

Share

What are the pros and cons of automotive glass coating?

Automotive glass coating offers benefits such as corrosion resistance, easy cleaning, and high-temperature resistance; the drawbacks include color difference issues and maintenance concerns. Below is more information about automotive glass coating: 1. Introduction: Glass coating is a chemical polymer material. Due to its high-density chemical properties, it is widely used in the field of automotive detailing. Additionally, glass coating features high gloss, oxidation resistance, acid and alkali resistance, and UV protection. When applied to the paint surface, it enhances glossiness and isolates the paint from external elements, providing excellent protection. 2. Precautions: Glass coating should not be applied to rearview mirrors; anti-fog coating should not be applied too thickly; glass coating can still be applied even if the glass has been treated with explosion-proof film; avoid rain or car washing within 4 hours after glass coating application; anti-fog agents typically last for 1 month per application, while glass coating lasts for about 6 months per application; when selecting glass coating products, carefully check the product's formula and ingredients.

6

4

Share

What is the actual fuel consumption of the Haima Premacy 1.8 automatic transmission?

Haima Premacy's fuel consumption per 100 kilometers is approximately 9.5 liters. Here is some extended information about the Haima Premacy: 1. Model: The Haima Premacy is an MPV model under the Haima brand. This vehicle is equipped with two types of engines, one is a 1.6-liter naturally aspirated engine, and the other is a 1.8-liter naturally aspirated engine. 2. Engine: The 1.6-liter naturally aspirated engine delivers 120 horsepower and a maximum torque of 158 Nm. The engine's maximum power is achieved at 6000 rpm, and the maximum torque is reached at 4500 rpm. This engine is equipped with VVT technology and multi-point fuel injection technology, and it uses an aluminum alloy cylinder head and block. It is paired with either a 5-speed manual transmission or a CVT transmission.

4

5

Share

What are the classification levels for water submersion?

"Water-damaged vehicles" are classified into three levels based on the extent of water submersion: 1. "Water-soaked vehicles," where water exceeds the tire level. 2. "Partially submerged vehicles," where water surpasses the engine oil dipstick. 3. The most severe case is called "fully submerged vehicles," where water exceeds the roof level. Below is relevant information: Operational lifespan of water-damaged vehicles: Considering the vehicle's design lifespan and market conditions, many owners of water-damaged vehicles can still drive them for about four years, while some repaired water-damaged vehicles may last up to five years. Therefore, even after repairs, as long as the vehicle's technical condition is restored, it can typically operate normally for four to five years. Hazards of water-damaged vehicles: Water-submerged vehicles are prone to electronic system short circuits, posing safety risks such as spontaneous combustion. For instance, critical systems like ABS anti-lock braking, ESP stability control, and ECU engine control may fail to function when needed, leading to potentially disastrous consequences. Additionally, many external repair shops fail to meet quality standards, making it nearly impossible to fully restore the vehicle to 100% of its technical requirements. The lifespan of certain components is significantly reduced, which is one of the reasons why water-damaged vehicles are generally not recommended.

5

4

Share

What are the differences between the Cadillac XTS and CT6?

The biggest difference between the XTS and CT6 lies in their space. Here is a related introduction about the differences between the Cadillac XTS and CT6: 1. Price: From the price, it's easy to see that the CT6 is positioned slightly more high-end than the XTS. In fact, this is indeed the case. The CT6, as Cadillac's current flagship model, is mainly targeted at high-end families and business use, while the XTS is positioned more towards mid-range users. 2. Space: The XTS has dimensions of 5103*1852*1502mm with a wheelbase of 2837mm. In terms of size, the XTS is a standard C-segment car, competing mainly with models like the Audi A6L and Mercedes-Benz E-Class. The CT6, on the other hand, offers slightly more space with dimensions of 5179*1879*1492mm and a wheelbase of an impressive 3109mm. This space already exceeds the standard for a typical C-segment car, leading many media outlets and consumers to classify the CT6 as a C+ segment model. With such space, the CT6 offers a more comfortable ride compared to the XTS, though it also comes at a higher price.

4

3

Share

Can Wet Dual-Clutch Transmissions Wade Through Water?

What Type of Fuel Should a China VI Standard Vehicle Use?

Can the green vehicle registration book be reissued if lost?

What are the pros and cons of automotive glass coating?

What is the actual fuel consumption of the Haima Premacy 1.8 automatic transmission?

What are the classification levels for water submersion?

What are the differences between the Cadillac XTS and CT6?

How Long Should You Drive to Fully Charge a Car Battery After a Jump Start?

How to Quickly Cool Down a Car in Summer?

What is the difference between Maserati Quattroporte and Ghibli?

Will I receive a text message if I fail to schedule the Subject 1 exam?