Can Vehicles Undergo Annual Inspection in Another Location?

1 Answers
AlexanderLynn
07/30/25 7:45am
Vehicles can undergo annual inspection in another location. There are two types of out-of-location annual inspections for vehicles: 1. Annual inspection within the same province. You can participate in the annual inspection at any qualified motor vehicle inspection station within the province without needing to apply for an out-of-location inspection authorization. 2. Annual inspection outside the province. You need to submit an application for out-of-location inspection authorization. When applying, you must provide the vehicle's license, compulsory liability insurance policy, and the vehicle management office will verify the vehicle before issuing an authorization letter for the inspection and approval mark. 3. If you authorize someone else to handle the process, you also need to provide the identity proof of the authorized person.
Was this review help?
3
2
Share
More Forum Discussions

Is it illegal to lie down and sleep in the passenger seat?

It is not considered illegal as there are no explicit regulations prohibiting passengers from reclining their seats and lying down during a journey. However, this behavior is quite dangerous, and passengers are required to wear seat belts. When riding in a motor vehicle, one must not interfere with the driver, extend any part of the body outside the vehicle, or jump out of the vehicle. Relevant information: 1. Regulations: According to Article 77 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China," the following rules must be observed when riding in a motor vehicle: do not hail a vehicle on the roadway; do not get on or off a vehicle from the left side on the roadway. 2. Precautions: Do not open or close doors in a way that obstructs other vehicles or pedestrians; while the vehicle is in motion, do not interfere with the driver, extend any part of the body outside the vehicle, or jump out; when riding a two-wheeled motorcycle, one must sit facing forward.
6
5
Share

How to Report for Subject Three (Road Test)?

Subject Three (Road Test) reporting phrases are as follows: 1. Before getting in the car: Report to the instructor, 'XX Driving School student XXX has completed the vehicle inspection, requesting permission to enter the vehicle.' 2. Interior inspection: 'Interior inspection completed, all instruments and gauges show normal readings, left/center/right rearview mirrors are properly adjusted, requesting permission to start.' Parking requirements: Observe, turn on the right turn signal, pull over within 30cm of the road edge, engage the handbrake and shift to neutral. 3. Before exiting the vehicle: 'Report to the instructor, operations completed, requesting permission to exit the vehicle.' Exit requirements: First observe by extending your head, then open the door and exit. 4. After exiting: 'Report to the instructor, requesting a summary.' (After the instructor's summary: 'Thank you, instructor.')
8
5
Share

How many kilometers does a new car's spark plug need to be replaced?

Under normal maintenance conditions, car spark plugs should be replaced after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it's recommended to follow the user manual. You can refer to the following maintenance standards for replacement: platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the hood, lift the engine's plastic cover, remove the high-voltage distributor wires, and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for external debris like leaves or dust and make sure to clean them thoroughly. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the removed high-voltage distributor wires according to the ignition sequence, and then snap the cover back into place.
18
1
Share

Where is the license plate Lu W from?

Lu W was previously used by provincial government employees in Jinan. In 2016, the Lu W license plate was discontinued, so this plate no longer exists today. It might be a fake plate or a prop plate used in TV dramas. More information about license plates is as follows: 1. The Chinese character at the beginning of a license plate represents the provincial-level administrative region where the vehicle is registered, while the letter represents the prefecture-level city. 2. Lu is the abbreviation for Shandong Province, so license plates starting with Lu belong to Shandong. According to relevant laws and regulations, starting from October 2018, Shandong Province abolished the Lu O and Lu W license plates, and completed the replacement of all such plates by December 31 of the same year. Vehicle owners still using Lu W plates today will face penalties and legal consequences under relevant regulations.
18
3
Share

Can I change a tire by myself on the highway?

You can change a tire by yourself on the highway, but it should be done in the emergency stopping lane with warning signs set up. Here are the procedures for handling emergencies on the highway: 1. When a vehicle breaks down and has to stop, immediately pull over to the right hard shoulder or emergency stopping lane, and turn on the hazard warning lights. If it's nighttime, also turn on the position lights and tail lights. 2. Set up a warning sign, commonly known as a triangle warning sign, which is usually stored in one of three places in the car: the trunk, the inside of the trunk lid, or under the trunk cover. 3. Take the warning sign, with the reflective side facing outward, walk in the direction of oncoming traffic, and place it 150 meters away in the corresponding lane. 4. Immediately evacuate all personnel to the outside of the right guardrail, then call the national unified highway emergency rescue number 12122 for assistance.
14
2
Share

How to Control Vehicle Speed with the Clutch?

When depressing the clutch, you should press it quickly and release it slowly. The correct way to step on the pedal is to place the sole of your foot on the pedal to prevent slipping. On uneven roads, you can lightly apply the brake to control speed, but the braking should be gentle, gradually increasing pressure during the process—avoid sudden braking. Develop the habit of starting by slowly releasing the clutch to the semi-engaged state, then releasing the brake until the car gradually starts. Below is additional information about the clutch: 1. The clutch is installed between the engine and the transmission and is the component in the vehicle's drivetrain that directly connects to the engine. Typically, the clutch is mounted together with the engine crankshaft's flywheel assembly, serving as the part that disengages and transmits power between the engine and the drivetrain. Throughout the process from starting to normal driving, the driver can operate the clutch as needed to temporarily separate or gradually engage the engine and drivetrain, thereby cutting off or transmitting the power output from the engine to the drivetrain. Its function is to allow gradual engagement between the engine and the transmission, ensuring a smooth start; temporarily disconnecting the engine from the transmission to facilitate gear shifting and reduce impact during shifting; and acting as a separator during emergency braking to prevent overloading of the transmission and other drivetrain components, providing a certain level of protection. 2. The so-called 'one fast, two slow, three engagement' refers to the three stages of lifting the clutch pedal: initially lifting quickly, then slowing down when the clutch pressure plate gradually engages to the semi-engaged state, and finally lifting the pedal slowly from semi-engagement to full engagement. While lifting the clutch pedal, the accelerator pedal should be gradually pressed down according to the engine's power output to ensure a smooth start. The accelerator operation should be steady and appropriate, and the throttle should only be increased when the clutch is fully engaged.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.