···
Log in / Register

Can Vehicles Proceed When the Traffic Light Turns Green at a Congested Intersection?

6Answers
McMolly
09/06/2025, 10:36:47 PM

At a congested intersection, vehicles are not allowed to enter the intersection even when the traffic light turns green. Below are specific driving tips for traffic congestion: 1. Following Technique: During traffic jams, try to slightly offset your vehicle to the left relative to the car in front. This provides sufficient preparation time for braking and starting, and maintain an appropriate distance. 2. Proper Braking: Drive at a steady speed in congested areas and always be ready to brake, but avoid keeping your right foot on the brake pedal for extended periods or too frequently. When braking, gently press the brake with the sole of your foot, which is quicker and more effective than using the toes. 3. Enter the Target Lane in Advance: In congested sections, especially at intersections, make sure to avoid lanes that cause traffic jams ahead of time. 4. Avoid Randomly Turning Off the Engine: To save fuel, drivers might turn off the engine while waiting, but this can lead to secondary brake failure. The braking system relies on the negative pressure generated by the engine to assist in braking. When the engine is off, only one braking opportunity is available.

Was this review help?
107
Share
VonEmery
09/18/2025, 10:08:37 PM

At a congested intersection, can you drive when the light turns green? Theoretically, a green light permits passage, but in reality, you shouldn't blindly proceed. Based on my years of driving experience: if the intersection is jammed with tightly packed vehicles, driving in will only leave you stuck in the middle, which violates traffic rules and may block traffic from other directions, potentially causing accidents or fines. The rule is simple: a green light doesn't mean you must go forward—if the road ahead is blocked, stay put and wait for it to clear. I've been in situations where impatience led me to rush forward, only to get stuck, wasting time and feeling embarrassed. Since then, I always assess the traffic before deciding. As a driver, cultivating safe driving habits is essential. Every moment of waiting is an act of respect and responsibility. Additionally, considering urban traffic congestion is crucial, especially during peak hours. Be extra cautious to avoid small actions that could paralyze the entire intersection, saving everyone's valuable time and reducing friction. Remember, a green light is an opportunity, but use it wisely.

Was this review help?
14
Share
Expand All
LucyAnn
11/01/2025, 10:29:56 PM

When I first started learning to drive, I was particularly confused about this issue. The instructor said to go when the light turns green, but should I move when stuck at an intersection? Later, I understood that even when the light is green, if the road ahead is completely blocked, you must never drive into the intersection. Otherwise, your car could get stuck in the middle of the crossroad, affecting traffic in all directions. New drivers often make this mistake—I once almost caused a mess myself, but thankfully an experienced driver reminded me in time. When driving, it's crucial to assess the overall situation. A green light isn't an unconditional pass, especially during peak congestion hours. Learning this rule is vital for safety. As experience accumulates on the road, it builds confidence in handling complex traffic situations and fosters better driving culture, making traffic flow smoother.

Was this review help?
11
Share
Expand All
JuniperLee
12/15/2025, 09:33:57 PM

As a veteran driver with over a decade of experience, I know this all too well. Eager to dash when the light turns green? Don't be foolish! With the intersection already jam-packed, entering would just invite trouble, leaving you stuck and unable to move. The rule says not to enter a blocked intersection—it's there to prevent total chaos. Take it easy, be patient and wait; this moment won't make or break you. Urban driving is all about these little bits of wisdom to keep things smooth.

Was this review help?
4
Share
Expand All
LeAmy
02/04/2026, 10:25:52 PM

As someone who commutes in the city year-round, I have a deep aversion to traffic congestion. When the light turns green but the road ahead is blocked, I firmly refuse to move my car. Because once you drive into that situation, the entire intersection could become completely gridlocked, leaving no one able to move. I've personally experienced this kind of situation, finding it both frustrating and dangerous. Now when driving, I assess the situation before acting, which helps reduce unnecessary trouble. Considering the complexity of urban environments, this kind of decision-making is crucial for daily commuting efficiency, protecting both myself and others.

Was this review help?
9
Share
Expand All
BenjaminMarie
04/30/2026, 02:37:40 PM

I always exercise extra caution when picking up or dropping off my children at congested intersections. The light turns green? I make absolute sure it's safe before even considering entering. With kids in the backseat who get nervous seeing chaotic intersections, I avoid any risks whatsoever. Traffic regulations also emphasize not blocking intersections, and I strictly comply to instill traffic safety awareness in my children. Maintaining composure is key during family trips - those extra few seconds of waiting for safety and smooth traffic flow are always worth it. This mindset extends to other aspects of life, making me a more dependable driver overall.

Was this review help?
5
Share
Expand All
More Q&A

Which is more powerful, fuel-saving switch 0 or 1?

Fuel-saving switch 1 is more powerful. Here are the relevant details: 1. Function: It adjusts the engine's output power, providing lower power when the vehicle is empty to save fuel, while delivering full power when heavily loaded to meet the vehicle's rigid demand for power. 2. Conditions: Switching this switch has certain conditions; the vehicle speed must be below 5 km/h, the engine speed below 800 rpm, and the throttle opening less than 5%. In other words, adjusting it while driving is ineffective, and it must be set before driving. 3. Vehicle Types: In trucks compliant with National IV standards or above, there is usually a dial or knob on the dashboard labeled with four positions: 'Heavy,' 'Medium,' 'Light,' and 'Empty.' This is the vehicle's 'Engine Multi-state Torque Switch,' commonly known as the 'Fuel-saving Switch.'
110
Share

What is the difference between Volvo B5 and T5?

Volvo B5 and T5 differ in their engines. The Volvo B5 engine is equipped with a 48V mild hybrid system, while the T5 engine does not have a 48V mild hybrid system. The B5 engine also features an improved automatic start-stop system. The T5 has a maximum horsepower of 254 hp, whereas the B5 has a maximum horsepower of 250 hp. Definition of metric horsepower: Metric horsepower, also known as PS (Pferdestärke), is entirely artificially defined and set at a value very close to imperial horsepower. One metric horsepower is defined as the power required to perform 75 kilogram-force meters of work per second. Definition of imperial horsepower: The concept of horsepower as a unit was named by James Watt, the improver of the steam engine, to represent the power of his steam engine relative to the pulling power of horses. It is defined as the power of a horse capable of pulling 33,000 pounds at a speed of one foot per minute, with the standard units being watts (W) or kilowatts (kW).
116
Share

What is the Hyundai Matrix?

Hyundai Matrix is the Hyundai Matrix car. The following is a related introduction to the Hyundai Matrix: 1. Power: The Matrix in production comes with two displacement models: 1.6L and 1.8L. The 1.8L engine delivers a maximum horsepower of 122ps at 6000rpm and a maximum torque of 16.4kg.m at 4500rpm. 2. Interior: The dashboard shows excellent performance in terms of the control of seam sizes between components and the assembly quality of components. Even the plastic decorative panels with a titanium-like metallic finish demonstrate fine surface treatment and excellent color control.
111
Share

What do emergency braking and engine braking mean?

Here is the relevant introduction to emergency braking and engine braking: 1. Emergency braking: Emergency braking, also known as emergency stop, is the vehicle's secondary braking system, used when the primary braking system fails suddenly during driving. For vehicles using compressed air, since the rear axle employs a dual-chamber brake air chamber, the parking brake simultaneously serves as the emergency brake. Some vehicles use the rear axle brake as the hand brake, which also functions as the emergency brake. 2. Engine braking: Engine braking refers to lifting the accelerator pedal without depressing the clutch, utilizing the compression resistance, internal friction, and intake-exhaust resistance generated by the engine's compression stroke to create a braking effect on the drive wheels. Engine braking fully utilizes the engine's drag to control the vehicle speed. This method is most commonly used in mountainous areas, especially when descending large mountains or steep slopes. Frequent use of the brake can cause it to overheat, leading to reduced braking efficiency.
119
Share

Is Computer Matching Required After Replacing a Car Battery?

After replacing a car battery, computer matching is not required; at most, you may need to reset the radio. Here is some relevant information: 1. Battery: A battery refers to a device that can be recharged and reused after discharging. Common types include lead-acid batteries, nickel-iron batteries, and nickel-cadmium batteries. In a lead-acid battery, the positive electrode is lead dioxide, the negative electrode is lead, and the electrolyte is a dilute sulfuric acid solution. During discharge, the positive and negative electrodes react with sulfuric acid to form lead sulfate. When the sulfuric acid concentration drops to a certain level, the battery must be recharged. 2. Car Battery: A car battery is a type of battery, also known as a storage battery. Its working principle involves converting chemical energy into electrical energy. Typically, the term 'battery' refers to a lead-acid battery, which mainly uses lead and its oxides as electrodes and a sulfuric acid solution as the electrolyte. A battery is a device that can be recharged and reused after discharging.
107
Share

Can a cracked intake hose still be used?

Intake hose cannot be used if cracked. Here are the relevant details: 1. Location: The engine intake hose is generally located between the throttle valve and the engine intake valve. The intake pipe is the main air passage, while the intake manifold distributes air to each cylinder to support combustion. The air passes through the carburetor, where gasoline is atomized and enters the cylinder along with the air. 2. Function: The engine intake tract is the passage for air to enter and exit the air filter. The intake pipe is the manifold connecting the air filter to the carburetor, and the intake manifold is the tube connecting the bottom of the carburetor to the intake valve on the cylinder block. The intake pipe includes the main intake pipe and the branch intake pipes. In addition to requiring power performance, the engine must also have good fuel economy and emission performance.
103
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.