Can Vehicles Be Disinfected with 84 Disinfectant?

2 Answers
RicardoRose
07/29/25 5:11am
Vehicles can be disinfected with 84 disinfectant, but it must be diluted at a ratio of 1:200. If you want to disinfect items like floor mats or fabric seat covers inside the car, remove them first and then disinfect them by wiping, spraying, or soaking. After disinfection, remember to ventilate the vehicle to allow toxic gases to fully dissipate. If you choose to use diluted 84 disinfectant to clean the car, avoid directly spraying it on areas covered with leather materials, such as seats, the dashboard, or door panels, as this may cause discoloration of the interior. When disinfecting the exterior of the car, use 84 disinfectant with caution, as insufficient dilution may damage the paint due to its strong corrosive properties.
Was this review help?
6
0
Share
Moreira
08/12/25 8:48am
Hey, I've thought about this before. Using 84 disinfectant to clean the car is really not recommended. It contains sodium hypochlorite, which is too strong. Materials inside the car like leather, plastic, and fabric can easily corrode upon contact, leading to discoloration and cracks over time. Once, I accidentally spilled some on the dashboard, and it left white stains that were hard to remove, costing a lot to fix. Now, I use a disinfectant spray specifically designed for cars. Just spray and ventilate for five minutes—it kills germs while protecting the interior. Especially during the pandemic, I disinfect daily, but it's crucial to choose the right method. The small space inside the car makes chemical residues easy to inhale, affecting health, so I'm very careful with each cleaning, avoiding strong disinfectants. If you must use 84, dilute it to a low concentration, wipe quickly, and rinse thoroughly, but there's still a risk. It's better to save yourself the hassle and buy reliable products.
Was this review help?
13
2
Share
Expand All
More Forum Discussions

How many kilometers should the spark plugs of Wuling Hongguang S be replaced?

It is recommended to replace the spark plugs of Wuling Hongguang S every 40,000 kilometers. Under normal maintenance conditions, car spark plugs should be replaced after driving 40,000 to 60,000 kilometers. However, due to differences in brands and engines, it may vary. It is recommended to follow the user manual. The following standards can be referred to for maintenance and replacement: platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the hood, lift the plastic cover of the engine, remove the high-voltage distributor wires, and mark the position of each cylinder to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. When removing them, check if there are any leaves, dust, etc., on the outside and make sure to clean them thoroughly. Place the new spark plugs into the spark plug holes, hand-tighten them a few turns, and then use the socket to tighten them. Install the removed high-voltage distributor wires according to the ignition sequence and snap the cover back on.
15
2
Share

Where is the Citroen Hood Switch Located?

Citroen hood switch is located on the left side of the foot pedal, featuring a button switch. Below are detailed introductions about the functions of the hood: 1. Accident Prevention: The engine operates in a high-temperature, high-pressure, and flammable environment, posing risks of explosion, combustion, or leakage due to overheating or accidental damage to components. The hood effectively blocks damage from explosions, serving as a protective shield. It efficiently blocks air, preventing flame spread, thereby reducing fire risks and losses. 2. Special Purpose Platform: In special vehicles, high-strength hoods are utilized as work platforms, providing support. 3. Protection for Engine and Peripheral Pipeline Components: Beneath the engine cover lies crucial components of the vehicle, including the engine, electrical circuits, oil circuits, braking system, and transmission system, all of which are vital to the vehicle. By enhancing the strength and structure of the engine cover, it fully guards against adverse effects such as impacts, corrosion, rain, and electrical interference, ensuring the vehicle's normal operation.
6
3
Share

Is the BMW X1 equipped with a three-cylinder engine?

BMW X1 offers both three-cylinder and four-cylinder versions. It is equipped with two types of engines: a 1.5-liter turbocharged three-cylinder engine and a 2.0-liter turbocharged four-cylinder engine. Below are the differences between three-cylinder and four-cylinder engines: The operational smoothness of a three-cylinder engine is inferior to that of a four-cylinder engine, and the noise level during operation is higher with a three-cylinder engine. Additionally, the production cost of a three-cylinder engine is lower than that of a four-cylinder engine. Compared to a four-cylinder engine, a three-cylinder engine has one less cylinder, piston, connecting rod, set of intake and exhaust valves, spark plug, ignition coil, fuel injector, intake manifold, and exhaust manifold. Three-cylinder engines are lighter and more compact in size. Using a three-cylinder engine helps improve fuel economy and reduce exhaust emissions. Most hybrid vehicles utilize three-cylinder engines due to their smaller size, which allows for the installation of an electric motor in the engine compartment. Many automakers employ technical measures to compensate for the inferior operational smoothness of three-cylinder engines.
13
5
Share

What is the reason for the abnormal noise in the Xingrui accelerator pedal?

The abnormal noise in the Xingrui accelerator pedal may be caused by carbon deposits in the throttle valve leading to sticking; wear of the accelerator pedal support pin; or improper installation of the accelerator cable. Below is additional information: 1. Introduction to the accelerator: The accelerator, also known as the "throttle" or "air valve," is a control device that regulates the engine's power (thrust). In piston aircraft engines, the accelerator controls the opening of the carburetor's throttle valve to adjust the cylinder's filling volume, thereby determining the engine's output power. In gas turbine engines, the accelerator controls the metered fuel flow of the fuel regulator, thus determining the thrust generated by the engine. The accelerator position is manipulated by the pilot in the cockpit via the throttle lever, transmitted through control system components such as pushrods, rockers, torque tubes, cables, pulleys, and sector gears to the carburetor or fuel regulator on the engine. 2. Precautions: When starting an unloaded vehicle, avoid using a large throttle opening; a small throttle opening is recommended. For starting under load, a medium throttle opening is advisable.
20
0
Share

Does Not Signing After Passing Subject 4 Have Significant Impact?

Generally, not signing does not cause major issues as the staff will sign on your behalf. Below is relevant information about Subject 4: 1. Introduction: Subject 4, also known as the theoretical test for drivers or driver's license theory exam, is part of the motor vehicle driver's license assessment. 2. Retake Instructions: Failing Subject 4 does not require retaking previously passed subjects (Subject 1, Subject 2, Subject 3). You can independently schedule a retake without additional fees. Currently, there are no scheduling restrictions for the safe and civilized driving theory test. However, the driving skills test permit is valid for three years. If the applicant fails to complete all tests within this period, previously passed subject scores will become invalid.
18
4
Share

Is Subject 3 Divided into Two Tests?

Subject 3, also known as the Road Safety Driving Test, is divided into the Road Driving Skills Test and the Safety & Civilized Driving Knowledge Test. Below are the details about Subject 3: 1. Introduction: Subject 3 is part of the motor vehicle driver's license assessment, and it is the abbreviation for the Road Driving Skills and Safety & Civilized Driving Knowledge Test. 2. Test Content: The Road Driving Skills Test generally includes: preparation before driving, light simulation test, starting, driving straight, gear shifting operations, changing lanes, pulling over, driving straight through intersections, turning at intersections, meeting other vehicles, overtaking, making U-turns, night driving, etc. The test content varies depending on the type of vehicle being licensed. The Safety & Civilized Driving Knowledge Test generally includes: requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, and knowledge of handling traffic accidents.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.