Can Vehicle Registration Be Handled by an Agent?

Do You Need to Replace Two Tires When One is Damaged?

When one tire is damaged, it is not always necessary to replace two tires. It depends on the wear condition of the other tire. If the wear is severe, it is best to replace both tires together. Below are situations where replacing two tires is recommended: 1. Prolonged Usage: If the tires have been in use for a long time or have high mileage, it is advisable to replace both tires simultaneously. Generally, when a tire has reached half of its lifespan, you can consider replacing both tires, typically after driving more than 40,000 kilometers. 2. Different Tire Brand or Model: If the repair shop does not have the same brand and model of tire as the one on the vehicle and can only provide a different brand, it is recommended to replace both tires for long-term use. The main functions of tires include: 1. Load Bearing: Supporting the entire weight of the vehicle and bearing the load of the car; 2. Traction: Transmitting traction and braking torque to ensure good adhesion between the wheels and the road surface; 3. Damage Prevention: Preventing severe vibrations and early damage to automotive components.

11

5

Share

What is C1?

C1 driver's license is one of the codes for motor vehicle driving licenses. The permitted driving scope of a C1 license includes small and mini passenger vehicles, light and mini cargo vehicles; light, small, and mini special purpose vehicles; and small passenger vehicles with a seating capacity of 9 or fewer people. The application age requirements are as follows: The minimum age limit for a C1 driver's license is 18 years old, with no upper age limit. However, applicants aged 70 and above must pass tests on memory, judgment, and reaction abilities. The permitted vehicle types are as follows: The permitted driving scope of a C1 license includes small and mini passenger vehicles, light and mini cargo vehicles; light, small, and mini special purpose vehicles; and small passenger vehicles with a seating capacity of 9 or fewer people. Vehicles that cannot be driven with a C1 license include: large buses, tractors, city buses, medium-sized buses, large trucks, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams. Additionally, a C1 license does not permit driving vehicles with more than 9 seats or trucks with a total length exceeding 6 meters.

4

3

Share

Should the turn signal be turned off when pulling over for the parking test in Subject Three?

Generally, when adjusting the direction while pulling over, the turn signal will automatically return to its normal position as the steering wheel is straightened. Therefore, there is no need to manually turn the turn signal on or off when parking. During the road test, it is mandatory to use the turn signal when pulling over; failing to do so will result in point deduction. Below is relevant information about the Subject Three test: 1. Introduction: Subject Three includes the road driving skills test and the safe and civilized driving knowledge test, which are part of the motor vehicle driver's license assessment. The content of the road driving skills test varies depending on the type of vehicle being licensed. 2. Content: The road driving skills test for Subject Three generally includes: preparing to start, simulated lighting test, starting, driving straight, shifting gears, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, crossing pedestrian crosswalks, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and driving at night. The safe and civilized driving knowledge test generally includes: requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations such as tire blowouts, and knowledge of post-accident handling procedures.

3

0

Share

What are the three filters in a car and how often should they be replaced?

Car three filters refer to the air filter, oil filter, and fuel filter. It is recommended to replace the three filters every 5,000 kilometers. Below are the specific details of routine car maintenance items: 1. Oil and oil filter replacement: Mainly for the maintenance of the lubrication system. The primary function of the lubrication system is to effectively lubricate various components of the car engine to prevent excessive wear. The oil filter's role is to remove various impurities from the oil to ensure the normal operation of the lubrication system. The oil filter should be replaced together with the oil during an oil change. Under normal circumstances, a car should be serviced every 5,000 KM. 2. Filter element replacement: The air filter's function is to filter the air before it enters the cylinder, removing impurities, dust, sand, and other foreign particles. The cleaning and maintenance of the air filter depend on the usage environment. The fuel filter is generally replaced after driving 20,000-25,000 KM. 3. Spark plug replacement: Spark plugs are consumable parts and should be replaced every 20,000 KM. In addition, components such as brake fluid, transmission oil, battery, throttle, fuel injector, and brake pads are all inspection items during routine maintenance, and they should be serviced and maintained based on usage conditions.

19

0

Share

What is the capacity of car windshield washer fluid?

Car windshield washer fluid capacity is about 1.5 liters, and the car windshield washer tank capacity is generally about 5 liters. Car windshield washer fluid is divided into 0-degree fluid for summer use and -20-degree or -35-degree fluid for winter use. The functions of car windshield washer fluid: Using washer fluid while driving keeps the front windshield transparent, prolongs the life of the glass and wipers, prevents window icing in winter, and prevents static electricity on the windows. How to add car windshield washer fluid: Turn on the wiper switch, and the washer fluid will spray from below the front windshield until the spray nozzles stop spraying. Open the washer fluid filler cap, add washer fluid, then turn on the wiper switch again to clear out the remaining fluid. When no more fluid sprays from the nozzles, add more washer fluid. Finally, close the washer fluid cap. Precautions for adding car windshield washer fluid: Understand your car's characteristics: Each car has different requirements for washer fluid, such as concentration, molecular weight requirements, and pressure capacity. Only by understanding these factors can you use washer fluid effectively. These data requirements are usually specified in the car's user manual. Choose the right washer fluid: Different car models may come with specific washer fluids for sale, which can be added directly. If not available, you may need to purchase and mix washer fluid in a certain ratio. When filling, avoid overfilling—add more if needed. Try to use the same brand of washer fluid to prevent pipe clogging.

11

0

Share

What is the difference between internal and external tire pressure monitoring?

The difference between internal and external tire pressure monitoring lies in the installation method: internal tire pressure monitoring involves installing the sensor inside the tire, while external tire pressure monitoring involves installing the sensor outside the tire. The installation of internal tire pressure monitoring is more complex, requiring the tire to be removed. It is recommended to have it installed by professional automotive repair personnel, and after installation, the dynamic balance needs to be readjusted. The automotive tire pressure monitoring system is a set of initialization systems specifically designed for vehicle manufacturers to detect tire pressure. It uses wireless radio frequency technology to quickly activate, identify, and locate various TPMS sensors, and writes relevant information into the vehicle's ECU electronic control unit through the OBDII interface to initialize the tire pressure detection system.

13

2

Share

Can Vehicle Registration Be Handled by an Agent?

Do You Need to Replace Two Tires When One is Damaged?

What is C1?

Should the turn signal be turned off when pulling over for the parking test in Subject Three?

What are the three filters in a car and how often should they be replaced?

What is the capacity of car windshield washer fluid?

What is the difference between internal and external tire pressure monitoring?

What Are the Tips to Absolutely Avoid Stalling During the Slope Start in Subject 2?

Which Tires Should Snow Chains Be Installed On?

What does 1000r/min mean?

What are the differences between the Yidong Plus and the Ruicheng CC?