Can vehicle inspections be done in Handan on Saturdays and Sundays?

2 Answers
VonAlan
07/25/25 9:28am
Vehicle inspections cannot be done in Handan on Saturdays and Sundays. Vehicle inspection stations are closed on Saturdays, Sundays, and statutory holidays, so inspections are not available on weekends. Annual vehicle inspections are mandatory for all car owners. The purpose of these inspections is to check the technical condition of motor vehicles, thereby reducing the probability of traffic accidents. During the inspection, the vehicle must be driven onto the inspection line, where professional staff will conduct the necessary checks. Documents required for vehicle inspection: Essential documents: Original and copy of the vehicle license, road and bridge fee IC card, proof of road maintenance fee payment, vehicle and vessel tax certificate, original insurance card, and original ID card. Inspection time requirements: Vehicles that are 6 years old can apply for annual inspection within 3 months before the expiration date. Inspections can only be done in advance, not postponed. Preparation before inspection: First, check if the vehicle has any traffic violations, as vehicles with outstanding violations will not be accepted by the vehicle management office. You can directly inquire about any violations at the traffic police station.
Was this review help?
8
5
Share
StIsabela
08/11/25 7:21pm
I remember last year when helping a friend with vehicle inspection in Handan, I went to a testing station on Saturday morning, waited in line for two hours, only to find a few windows open with low efficiency due to the crowd. Later, I asked the staff and learned that some large inspection sites in Handan operate for half a day on Saturday mornings and are mostly closed on Sundays. It's recommended to check the Handan Traffic Bureau's official website on your phone or call the 12345 citizen hotline to confirm business hours in advance. Don’t end up making a wasted trip like I did. Weekend inspections often encounter peak hours, and there’s less equipment maintenance, so going on weekdays is faster. A driving buddy also shared that some private stations don’t accept cars with low service fees on Sundays, so it depends on the specific location. In short, you can get your car inspected on weekends, but it’s not necessarily convenient.
Was this review help?
12
3
Share
Expand All
More Forum Discussions

What Causes Severe Jerking at Low Speeds in the JAC Jiayue A5?

JAC Jiayue A5's severe jerking at low speeds may result from the following causes: Engine oil passage blockage: First, focus attention on the engine. If the car experiences jerking while driving, the engine is undoubtedly involved. The engine's ignition, air intake, and fuel injectors collectively determine fuel combustion, which is the power source of the engine. If the air intake volume decreases, ignition weakens, or fuel injection reduces, power will be insufficient, leading to jerking sensations. Transmission oil contamination causing solenoid valve damage: If sludge circulates within the transmission oil and blocks oil passages in the valve body, jerking issues will arise. Over time, this can lead to a series of transmission problems such as overheating, impact, and slippage. Break-in period: During the break-in period of a new car, slight jerking while driving is normal. This is because the vehicle's power output and component engagement are not yet at optimal levels, and the transmission's computer has a self-learning mechanism that continuously adjusts oil pressure for gear shifts.
20
3
Share

Does the Volkswagen CC 1.8T burn engine oil?

Generally, turbocharged (T) engines tend to burn engine oil, so if you own a T model, it's advisable to regularly check the oil level. The CC 1.8T is no exception and may experience some oil consumption. Introduction to oil burning: Oil burning refers to the situation where engine oil enters the combustion chamber and mixes with the air-fuel mixture for combustion. When a vehicle exhibits 'oil burning,' it can lead to premature failure of the oxygen sensor, increased carbon deposits in the combustion chamber, unstable idling, lack of acceleration power, increased fuel consumption, and excessive exhaust emissions. In severe cases, insufficient engine lubrication may cause irreparable damage or even complete engine failure, significantly raising maintenance costs and posing potential safety hazards. Preventive measures for oil burning: Engine oil is highly susceptible to corrosion and aging under prolonged high-temperature conditions, resulting in thinner oil films that are more prone to entering the combustion chamber. Therefore, using high-quality engine oil can significantly delay this phenomenon. Additionally, maintaining the cleanliness of the fuel system is crucial. During combustion, fuel inevitably produces carbon deposits, which are the root cause of various automotive issues. Problems such as aging valve seals and increased piston-cylinder wall clearance are directly or indirectly related to carbon deposit formation.
19
0
Share

Is the hood of the Audi Q3 made of aluminum?

Audi Q3's hood is made entirely of aluminum because the front of the Q3 is too heavy and the engine is placed in front of the front suspension. It is a typical case of being top-heavy. Hood principle: When the hood is opened, it generally flips backward, although a small portion may flip forward. A backward-flipping hood should open to a predetermined angle without touching the windshield, maintaining a minimum clearance of approximately 10 millimeters. To prevent the hood from opening on its own due to vibration while driving, the front of the hood must have a safety lock hook mechanism. The switch for this locking device is located under the dashboard in the cabin, and the hood should lock simultaneously when the doors are locked. Hood removal method: Open the hood and cover the body with a soft cloth to prevent damage to the paint; remove the windshield washer nozzle and hose from the hood; mark the hinge positions on the hood for easier reinstallation later; remove the bolts securing the hood to the hinges, taking care to prevent the hood from sliding off after the bolts are removed.
1
5
Share

What are the advantages and disadvantages of a wet dual-clutch transmission?

The advantages and disadvantages of a wet dual-clutch transmission are as follows: 1. The advantages of a wet dual-clutch transmission: The biggest advantage of a wet dual-clutch is its smooth gear shifting. The method of shifting gears through the handover of two clutches makes the smoothness of gear shifting in a wet dual-clutch transmission even comparable to that of a CVT continuously variable transmission. Moreover, the structure of a wet dual-clutch transmission is similar to combining two AMT transmissions together, so the shifting method of a wet dual-clutch transmission is more direct. 2. The disadvantages of a wet dual-clutch transmission: A wet dual-clutch transmission cannot withstand long-term low-speed driving and frequent starts in urban areas, which will increase internal wear and tear, leading to frequent malfunctions after a period of use.
3
4
Share

What does pushauto mean in a car?

The pushauto in a car refers to the one-touch start function. Here are the specific reasons why the one-touch start may not respond: 1. Steering wheel lock: The steering wheel lock is an anti-theft feature. When the car is turned off, turning the steering wheel from the centered position to a certain angle in one direction will lock the steering wheel. In this state, the one-touch start function will not work. You need to turn the steering wheel left and right while pressing the engine start button to release the tension and unlock the steering wheel. 2. Smart key battery dead: When the smart key's battery is dead, the key's transmission power is low, making it difficult for the car's sensor to detect the signal, which prevents the one-touch start from completing the ignition.
16
2
Share

Where can the difference between National 5 and National 6 standards be identified?

National 5 and National 6 standards differ in the following aspects: 1. Check the vehicle conformity certificate. 2. Review the environmental information accompanying the vehicle list. 3. Examine the vehicle qualification certificate. 4. Different carbon monoxide emission requirements: National 5 allows 1000 mg per kilometer; National 6 allows 500 mg per kilometer. 5. Different particulate matter emission requirements: National 5 allows 5 mg; National 6 allows 3 mg. 6. Different nitrogen oxide emission requirements: National 5 allows 60 mg; National 6 allows 35 mg. 7. Different non-methane hydrocarbon emission requirements: National 5 allows 68 mg; National 6 allows 35 mg.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.