Can vehicle inspections be conducted on Saturdays and Sundays?

1 Answers
DeFinn
07/28/25 5:22pm
Policies vary by region, but currently most areas allow vehicle inspections on Saturdays and Sundays. Below are the new regulations for vehicle annual inspections in 2021: 1. Exemption scope: The exemption range for motor vehicles has been expanded from the original 6 years and under for vehicles with ≤6 seats to non-operational mini and small passenger vehicles with 7-9 seats. 2. Inspection cycle: Vehicles eligible for exemption can avoid on-site inspections for the first 6 years, only requiring biennial paperwork. For years 6-10, an annual inspection was previously required. The new policy states that for private vehicles, the inspection cycle remains unchanged for the first 6 years, while vehicles aged 6-10 years now require biennial inspections instead of annual ones. This means exempt vehicles only need biennial inspections within 10 years, with on-site inspections required only in the 6th and 8th years.
Was this review help?
19
2
Share
More Forum Discussions

What is the Principle of Drifting?

The rear wheels lose most (or all) of their grip, while the front wheels must maintain their grip (at most losing a small portion, ideally even gaining additional grip). At this point, as long as there is a certain amount of lateral force on the front wheels, drifting will occur. Below is a detailed introduction to drifting: 1. Definition: Drifting is a racing term that refers to a series of maneuvers where the direction the car is pointing differs significantly from the actual direction of movement, causing the car to slide sideways through a turn. It is also known as "side slip," "skidding," or "fishtailing." 2. Applicability: Drifting is primarily used in performances or racing activities where road conditions vary greatly, with more frequent application in off-road rally racing. Other types of speed racing rarely use drifting techniques for turns. The main reason is that although drifting can maintain higher engine RPM during turns, it results in significant speed loss on regular asphalt roads, along with increased tire wear. Unless under special circumstances, drivers do not frequently use this technique during competitions.
17
4
Share

Why can't the newly matched key turn when inserted?

Here are the specific reasons why the newly matched car key cannot turn: 1. Connection device failure: The door handle and door lock have a connection device failure. The door linkage mechanism may have detached due to driving bumps, preventing the door lock from sensing the action of pulling the door handle. 2. Frozen door in winter: If the door lock, door handle, or door frame area freezes in winter, the key cannot open the door. Do not force the door open if it is frozen, as this can easily damage the door. Only pour hot water on the frozen area to speed up ice melting. 3. Wrong key turning direction: Incorrect operation with the wrong key turning direction. In most cases, turning the key clockwise unlocks the door, while turning it counterclockwise locks it. 4. Lock cylinder failure: Most car owners use remote keys to open or lock the door, rarely using mechanical keys. Due to prolonged disuse, the lock cylinder may rust. Try adding some engine oil to the lock cylinder.
16
2
Share

Why Can't Some Motorcycles Be Licensed?

Motorcycle licensing does not restrict displacement, but requires complete, formal, and legal documentation. Here is some relevant information about motorcycles: Introduction: A motorcycle is a two- or three-wheeled vehicle powered by a gasoline engine and steered by handlebars. It is lightweight, flexible, and fast, widely used for patrol, passenger and cargo transportation, and also serves as sports equipment. Broadly speaking, motorcycles are categorized into street bikes, road racing motorcycles, off-road motorcycles, cruisers, and touring bikes, among others. Origin: In 1885, German inventor Gottlieb Daimler mounted an engine onto a framed machine, giving birth to the world's first motorcycle. Motorcycle sports, related to motorcycles, are a type of military sports activity, serving as a competitive sport using motorcycles as equipment. They are divided into two-wheeled and three-wheeled models, with each model further categorized into several classes based on engine cylinder displacement.
12
1
Share

How to Turn on the Heating in Audi A4 Air Conditioning?

Audi A4 air conditioning heating activation method: 1. After starting the car, wait approximately 8-15 minutes for the water temperature to reach normal operating temperature, then you can turn on the heating. 2. Adjust the air conditioning circulation mode to internal circulation and switch to heating mode. 3. Do not turn on the AC switch because the heating system utilizes the car's own heat cycle, which saves energy. 4. Adjust the air conditioning level to a suitable setting and direct the air vents. Additional information: 1. During the use of heating, it is not advisable to turn on the heating immediately after entering the car. When the car is in a cold start state, the engine's water temperature is very low. Turning on the heating in this state will not only fail to raise the temperature quickly but will also slow down the warming process and increase the engine's burden. 2. The correct approach is to warm up the car first. Wait until the temperature gauge reaches the middle position before using the heating, and set the air circulation to external circulation initially. After a while, switch to internal circulation to rapidly increase the temperature inside the car.
3
3
Share

What are the causes of brake pad overheating?

Brake pad overheating is caused by poor retraction of the brake caliper leading to brake drag, or excessive braking frequency during driving which causes the brake disc to overheat. During vehicle operation, try to avoid frequent braking as it not only easily leads to brake disc overheating and damage, but may also cause harm to car tires, the engine, and automatic transmissions. The following introduces brake pads: 1. Definition and function of brake pads: Automobile brake pads, also called brake linings, refer to the friction materials fixed on the rotating brake drum or brake disc of the wheel. The friction lining and friction block bear external pressure to generate friction, thereby achieving the purpose of vehicle deceleration. 2. Composition of brake pads: Automobile brake pads are generally composed of steel plates, bonded heat insulation layers, and friction blocks. The steel plates are coated to prevent rust, and the coating process uses SMT-4 furnace temperature tracking instruments to monitor the temperature distribution during coating to ensure quality.
9
2
Share

How to start the Volkswagen Magotan?

Starting method for the Volkswagen Magotan: First, press the brake pedal, then press the one-touch start button to ignite the engine, and you can start driving. The one-touch start differs from traditional mechanical key ignition and conventional starting procedures. Simply press the one-touch start button lightly to start or stop the engine, eliminating the hassle of losing or searching for keys. The Volkswagen Magotan has body dimensions of 4866mm in length, 1832mm in width, and 1464mm in height, with a wheelbase of 2812mm and front-wheel drive. The new Magotan is equipped with 8 airbags, including full-size airbags for the driver and front passenger, side airbags for the front seats, rear side airbags, and front-to-rear through-type head dual air curtains. It also features intelligent driving assistance systems such as ACC adaptive active cruise control, intelligent parking assist system, rearview camera system, and OPS simulated visual front and rear parking system.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.