···
Log in / Register

Can Vehicle Inspection Be Conducted in Another Location?

2 Answers
MacAurora
07/29/25 3:09pm
Except for large passenger buses and school buses, which cannot be inspected in another location, all other vehicles can undergo inspection in a different location. Starting from September 1, 2018, cross-province inspection for small cars, trucks, and medium-sized buses has been fully implemented. Applicants can directly inspect their vehicles in provinces other than where the vehicle is registered and obtain the inspection qualification mark without needing to go through the entrustment inspection procedure. Vehicles that fail to undergo annual inspection on time are not allowed on the road. Driving a vehicle without timely annual inspection will result in 3 penalty points and a fine. If an accident occurs involving a vehicle that has not undergone annual inspection, the party involved will bear full or primary responsibility, and the insurance company will not compensate. Driving without timely annual inspection is considered illegal driving and may result in vehicle impoundment. According to the 'Mandatory Scrapping Standards for Motor Vehicles,' if a vehicle fails to obtain the inspection qualification mark for three consecutive inspection cycles after the expiration of the inspection period, it will be forcibly scrapped. Annual inspection procedures: First, after submitting the inspection application, the vehicle undergoes an online inspection. The vehicle is driven into the automatic inspection area to sequentially check whether the exhaust emissions, speed, lights, side slip, and chassis meet the standards. Only if all items pass can the vehicle proceed. Next is the appearance inspection, verifying the correctness of the vehicle's license plate, type, body color, engine number, VIN code, and frame number. Then, the vehicle body appearance is inspected, including details such as the bumper, engine compartment, rearview mirrors, lower mirrors, window glass, paint, engine operation condition, and the interior and wheels of passenger vehicles. Finally, the owner can obtain the inspection report and application form from the inspector. If all inspection items pass, the owner can proceed to pay the inspection fee and collect the vehicle license and qualification label. If any items fail, the owner must repair the vehicle and undergo re-inspection until all items pass before proceeding with the visa procedures.
Was this review help?
1
2
Share
MacLilah
08/13/25 7:50am
I just helped a friend with this last month! Now, vehicle inspections can be done nationwide across different locations. Just bring the vehicle registration certificate and a valid compulsory traffic insurance policy, and go directly to the local inspection station. Remember to make an appointment in advance on the Traffic Management 12123 App, select 'Motor Vehicle Inspection,' and the system will automatically notify the local vehicle management office. Special reminder: If you've changed the vehicle's color or applied stickers covering more than 30% of the body, you must return to the registration location to complete the modification before getting the inspection done elsewhere. It's best to handle any out-of-town traffic violations before the inspection and fix minor issues like lights and brakes in advance to avoid unnecessary hassle. The whole process takes about half an hour, and you can even pay by scanning a QR code.
Was this review help?
12
3
Share
Expand All
More Forum Discussions

Where to Collect the Inspection Exemption Label for Vehicles?

Vehicle inspection exemption labels can be obtained at the local vehicle management office or through the Traffic Management 12123 App without any fees. Below is some information about the inspection exemption label for vehicles: 1. Vehicle Management Office: If applying at the vehicle management office, the vehicle owner needs to bring the vehicle's driving license (original and copy), the ID card of the vehicle owner, the compulsory traffic insurance policy of the vehicle, and other relevant documents. Before processing, all traffic violation fines must be settled. 2. 12123 App: On the homepage of the Traffic Management App, find the 'Apply for Inspection Exemption Label' option, click on it, and then select the vehicle status option. Click 'Query,' and a prompt box for handling the annual inspection service will appear. Read the prompt information carefully, confirm, and click 'Continue Processing.' Fill in the vehicle information as required, review the prompt information, confirm, and click 'Next' to complete the application for the inspection exemption label.
17
3
Share

How to install the alternator belt on a Mercedes-Benz GLA?

Installation method for the alternator belt on a Mercedes-Benz GLA: 1. Loosen the generator fixing screw and the belt tension adjustment screw; 2. Push the generator towards the engine to minimize the distance between the pulleys, then place the belt on and align it properly; 3. Adjust the belt tension to the appropriate level, and tighten the engine fixing screw and adjustment screw. The Mercedes-Benz GLA is a compact SUV introduced by Beijing Benz, with dimensions of 4427mm in length, 1834mm in width, and 1610mm in height, and a wheelbase of 2729mm. It is equipped with a 1.3T turbocharged engine, delivering a maximum power of 100kw, and matched with a 7-speed dual-clutch or 8-speed dual-clutch transmission.
11
0
Share

Can a C1 License Drive Yellow License Plate Vehicles?

C1 license cannot drive yellow license plate vehicles, it only permits driving blue license plate vehicles. Yellow license plate vehicles typically refer to heavy-duty or large vehicles, which require a B-class license or above to operate. The C1 license is designated for small and micro passenger vehicles, as well as light, micro, and small special-purpose vehicles. The full name of a driver's license is the motor vehicle driving license, which is a legal document issued by the administrative authorities after a person who is legally allowed to learn to drive a motor vehicle has studied and mastered traffic regulations and driving skills, and passed the relevant tests. Driving a motor vehicle requires certain driving skills. Without these skills, driving a motor vehicle arbitrarily may lead to traffic accidents. Generally, individuals cannot drive on the road without a license.
14
0
Share

How much engine oil should be added to a Mondeo?

Mondeo requires 4.5 liters of engine oil. If it's a major overhaul without activation, approximately 5 liters are needed. The specific steps for adding engine oil are as follows: 1. Open the driver's side door; 2. Pull the hood release lever located on the left side of the driver's leg area; 3. Open the hood; 4. Unscrew the engine oil cap and add the engine oil; 5. The oil level should be between the upper and lower marks on the dipstick. The Mondeo is a mid-size car introduced by Changan Ford, with dimensions of 4873mm in length, 1852mm in width, and 1470mm in height, and a wheelbase of 2850mm. It is equipped with either a 1.5T or 2.0T turbocharged engine, with maximum power outputs of 134kw and 152kw respectively, paired with a 6-speed automatic transmission.
14
2
Share

How to Obtain the Vehicle Environmental Protection Label?

Vehicle environmental protection labels can be obtained at the vehicle management office. Owners need to bring their vehicle license, motor vehicle registration certificate, and their own ID card. The steps are as follows: 1. Submit the required documents at the issuance window of the vehicle management office; 2. The vehicle management office will review the documents; 3. Upon successful review, the vehicle management office will issue and print the classification label; 4. The applicant fills out the registration form; 5. The applicant receives the label and retrieves their valid documents. The vehicle environmental protection label is a classification label for motor vehicle emission standards issued by the state, categorized into yellow and green labels. It is issued after reviewing the vehicle type and emission standards, aiming to facilitate energy-saving and emission-reduction inspections and regular environmental protection checks for vehicles.
15
2
Share

What to do if a car window can only go down but not up?

Solutions for a car window that can only go down but not up include: 1. Initialize the window, which is usually caused by a malfunction in the window control system; 2. Remove dirt from the window lift channel by inserting a chopstick wrapped in a wet towel into the guide channel and moving it up and down to clean; 3. Apply lubricant or replace the window seal. Most cases where the car window cannot move up or down are due to mechanical jamming, and applying some lubricant after cleaning the guide rails should resolve the issue. Car window regulators can be structurally categorized into arm-type regulators and flexible-type regulators. Arm-type regulators include single-arm regulators and double-arm regulators, while flexible-type regulators include cable-type regulators, belt-type regulators, and flexible-shaft-type regulators.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.