Can Vehicle Inspection Be Conducted in Another Location?

2 Answers
VonDawson
07/24/25 8:45am
Yes. According to existing traffic laws and regulations, cross-regional vehicle inspection is possible through a delegated inspection process. However, the final inspection procedures must still be issued by the vehicle's registration location. This means you don’t have to drive the vehicle back to its registered location; instead, you can opt for cross-regional inspection via a delegated inspection model. The only requirement is that you may need to handle some additional procedures yourself. Below are some extended details: Inspection Documents: The most important document for cross-regional vehicle inspection is the "Cross-Regional Vehicle Inspection Authorization Letter." When applying for cross-regional inspection, the first step is to obtain this authorization letter. Then, with the authorization letter and other relevant inspection documents, you can proceed with the inspection at the local vehicle management office in the delegated location. To apply for the Cross-Regional Vehicle Inspection Authorization Letter, you will need the vehicle owner’s ID card, vehicle license, insurance documents, original and photocopy of the vehicle and vessel tax receipt, and the cross-regional inspection application form. These should be submitted to the vehicle management office in the registration location. Required Documents for Inspection: When conducting the inspection, you must bring the vehicle license, insurance documents, and the Cross-Regional Vehicle Inspection Authorization Letter to the delegated local vehicle management office. Note: The vehicle must not have any unresolved traffic violations; otherwise, the inspection cannot proceed normally.
Was this review help?
16
4
Share
LaMason
08/11/25 4:18am
I used to be a long-distance truck driver, and now vehicle annual inspections can indeed be processed in different locations. Since the nationwide inspection policy was introduced in 2018, inspections can be done anywhere. Once when I was on a business trip, I drove directly to a local inspection station with my vehicle license, compulsory traffic insurance policy, and a copy of my ID card. The whole process went smoothly, saving me the hassle of returning to my hometown. The key is to check the inspection station address in advance and preferably make an online appointment to avoid queues. Generally, stations in big cities are more efficient. I think this reform is very convenient, especially for mobile workers, but make sure your documents are genuine to prevent minor accidents. In short, out-of-town vehicle inspections are very reliable.
Was this review help?
18
3
Share
Expand All
More Forum Discussions

What to Do If You Have a Driver's License but Are Afraid to Drive?

Here are some solutions for those who have a driver's license but are afraid to drive: 1. Be bold and careful: Many people can drive but are afraid to, lacking even the courage to get into the car. So, if you want to drive, you must muster up the courage. With the increase in the number of cars, minor collisions and rear-end accidents happen from time to time, and various unexpected situations arise. Therefore, it's essential to be careful when driving. 2. Maintain a calm mindset and stay composed in emergencies: Nervousness is almost a common experience for every new driver. The view outside the car is clear, but once you sit in the driver's seat, you might feel confused, as the perspective is entirely different from outside. The more afraid you are, the more nervous you become, and the worse you drive. 3. Practice more: There are no shortcuts to driving. Only through frequent practice can you become skilled. For the first few times, it's advisable to practice in areas with less traffic before gradually merging into heavier traffic. Having a transition period will make it much easier.
19
3
Share

What are the causes of damage to an automatic transmission?

For the specific reasons of damage to an automatic transmission, the details are as follows: 1. Shifting time: Generally, automatic transmissions have specific shifting speeds and vehicle speeds. If you notice that the shifting time suddenly becomes too long or too short, it means the transmission ratio is out of proportion, and you may also feel that the engine speed is too high. In more severe cases, the transmission may not shift at all, indicating a problem with the transmission. 2. Transmission oil leakage: Oil seeping from the transmission housing or oil pan is caused by aging or poor sealing of the seals, or poor manufacturing quality leading to porosity in the housing. 3. Water ingress into the transmission: While driving, if you hear the engine revving without an increase in vehicle speed during acceleration, and the car feels sluggish, it may be due to burnt clutch plates or water entering the transmission from external sources, causing abnormal operation. This could be due to oil mixing in the radiator or water entering through the transmission vent cap.
1
2
Share

What to Do If the Chassis Leaks Due to Overfilled Windshield Washer Fluid?

If the leakage is caused by overfilling, simply wipe off the spilled windshield washer fluid. Below is some relevant information about windshield washer fluid: 1. Functions: Windshield washer fluid typically has functions such as wetting, penetrating, and solubilizing, thereby aiding in cleaning and removing dirt. The presence of alcohol and ethylene glycol in the fluid significantly lowers the freezing point of the liquid, providing antifreeze properties and quickly dissolving frost. 2. Classification: Based on form, it can be divided into solid and liquid windshield washer fluids. Solid windshield washer fluids are mostly used in environments above 0°C. One type, commonly used in summer, contains insect-removing glue components to quickly clean insect residues on the windshield. Another type is specifically designed for winter use, ensuring that car facilities are not damaged by freezing even when the external temperature drops below -20°C. There is also a special antifreeze type that remains unfrozen even at -40°C.
17
4
Share

How to Remove Cement Splashed on the Car?

There are several methods to remove cement from the car: 1. If it's within 12 hours: First, wet and soak the area with water, then use car wash liquid and a towel to gently clean it. 2. If it's over 12 hours: By this time, the cement has likely hardened. You can purchase some acidic solution from a pharmacy, dip a brush in it, and apply it to the cement. The cement will dissolve in the acidic liquid, and then you can rinse it off with water. 3. Using gasoline: Pour gasoline onto the cement, wait for it to soften slightly, and then remove the cement by hand (suitable for large-area removal). 4. Using a hairdryer: Heat the cement-splashed area with a hairdryer. Due to the different thermal expansion of cement and plastic, the cement will usually fall off automatically. 5. Using white vinegar: Spray white vinegar onto the cement with a spray bottle, wait for 3-5 minutes, and then gently scrape it off with a hard card. The cement will come off in chunks. Afterward, wash the area where white vinegar was sprayed with car wash liquid to ensure no residue remains.
9
2
Share

What is the function of a dash cam?

The functions of a dash cam: 1. After installing a dash cam, it can record the entire driving process including video images and sound, providing evidence for traffic accidents; 2. For those who enjoy self-driving tours, it can also be used to record the journey; 3. While driving, it continuously records videos, simultaneously capturing time, speed, and location in the footage, functioning much like a "black box"; 4. It can be used at home as a DV to capture life's joys or serve as a home surveillance device; 5. It can be used for parking surveillance. Once installed, the video footage must not be edited, as altered footage cannot provide assistance in the event of a liability accident.
7
0
Share

Which country produces Porsche?

Porsche is produced in Germany and is a sports car under the Volkswagen Group. Porsche's lineup includes the Porsche 911, Boxster, Cayman, Panamera, and Macan. Taking the Porsche 911 2020 Carrera as an example: the exterior dimensions of the car are 4519mm in length, 1852mm in width, and 1298mm in height, with a wheelbase of 2450mm. The Porsche 911 2020 Carrera is equipped with a 3.0T twin-turbocharged engine, paired with an 8-speed dual-clutch transmission, delivering a maximum horsepower of 385 hp, a maximum power of 283 kW, a maximum power speed of 6500 rpm, and a maximum torque of 450 Nm.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.