Can Used Car Dealers Help with Temporary Residence Permit Applications?

What speed to shift gears in Subject 3?

Subject 3 gear and speed standards: 1st gear: 0-20 km/h 2nd gear: 5-30 km/h 3rd gear: 15-40 km/h 4th gear: 30-55 km/h The highest gear required in Subject 3 is 4th gear, which should be shifted during straight-line driving. Avoid looking down at the gearshift when changing gears. Gear changes should be based on the vehicle's RPM. Keep your eyes on the road ahead and constantly observe traffic conditions. Students who are not proficient in gear shifting can practice more at the driving school. During practice, it's essential to develop the habit of avoiding looking down at the gearshift. Shift gears progressively - accelerate to upshift, decelerate to downshift. Speed and gear must always match. Gear shifting must be done one level at a time; skipping gears is not allowed. When decelerating, first reduce the speed before downshifting. If you accidentally engage the wrong gear, fully depress the clutch and shift again. When starting the vehicle, use 1st gear. Always fully depress the clutch when shifting, otherwise the gear may not engage. Gear changes should be quick but steady. When adjusting gears, shift immediately once the speed drops - it must be done quickly. The 100-meter acceleration and deceleration test evaluates the student's speed in gear shifting.

18

2

Share

What is the solution for moisture inside the headlight?

The solutions for moisture inside the headlight are: 1. Park the car in sunlight or a dry place; 2. Start the car engine and turn on the headlight function; 3. Replace the headlight sealing ring. The reasons for moisture in the headlight are: 1. Temperature difference changes; 2. Improper car washing; 3. Moisture is prone to form on rainy or snowy days. The headlight consists of a lampshade, bulb, lamp holder, reflector, lens, and light adjustment device. Types of headlights include position lights, daytime running lights, turn signals, brake lights, fog lights, reverse lights, and license plate lights. The working principle of the headlight is that the central intelligent control chip determines the brightness changes of the external environment based on the light sensor and completes the operation of turning the lights on and off.

7

0

Share

How to Turn on the High Beam on a Citroën?

To turn on the high beam on a Citroën, follow these steps: Enter the driver's seat, locate the light control lever on the left side of the steering wheel, and push the lever forward once to activate the high beam. The high beam focuses its light parallel to the ground, emitting a concentrated and bright beam that illuminates distant and elevated objects effectively. Taking the 2020 Citroën C5 as an example, it features a 4-door, 5-seater sedan body structure with dimensions of 4825mm in length, 1860mm in width, and 1480mm in height. It has a wheelbase of 2815mm, a fuel tank capacity of 70 liters, and a trunk capacity of 439 liters.

17

3

Share

How to adjust the time on the ninth-generation Accord?

To adjust the time on the ninth-generation Accord: Start the vehicle; Push the adjuster downward until "set" appears on the instrument panel; Press the set button and use the adjuster to set the year. After adjusting, press the set button to set the month, hour, and minute. Once completed, press the set button again, then select "exit" by pushing downward to return. Taking the 2021 Starry Sky Limited Edition ninth-generation Accord as an example, its body dimensions are: 4893mm in length, 1862mm in width, 1449mm in height, with a wheelbase of 2830mm, a fuel tank capacity of 48.5 liters, and a trunk capacity of 584 liters.

19

0

Share

How many kilometers does the Atenza need to change the transmission oil?

Atenza should change the transmission oil every two years or approximately every 40,000 kilometers. Transmission oil is essential for keeping the transmission system clean, ensuring it operates normally and prolonging the lifespan of the vehicle's transmission components. Below is some relevant information about the Atenza: Dimensions: The body dimensions are: length 4870mm, width 1840mm, height 1445mm, with a wheelbase of 2830mm, a minimum ground clearance of 162mm, and a fuel tank capacity of 56.2 liters. Power: The Atenza is equipped with a 2.0L naturally aspirated engine, delivering a maximum power of 116kW and a maximum torque of 202Nm. It features a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension.

2

4

Share

How to Remove the Door Panel of a BMW 5 Series?

To remove the door panel of a BMW 5 Series, follow these steps: 1. Open the door of the vehicle where the panel needs to be removed. 2. Insert a flat-head screwdriver into the gap between the trim strip and the interior panel, then pry open the clips inside to remove the trim strip. 3. Unscrew and safely store the screws securing the door panel. 4. Use a small flat-head screwdriver to pry off the inner handle cover. 5. Remove and store the second set of screws securing the door panel. 6. Using a larger flat-head screwdriver, carefully pry open the clips along the door panel gap one by one until they separate from the door panel. The BMW 5 Series is a mid-to-large-sized sedan. Taking the BMW 525Li as an example, its body dimensions are: length 5106mm, width 1868mm, height 1500mm, with a wheelbase of 3105mm.

7

3

Share

Can Used Car Dealers Help with Temporary Residence Permit Applications?

What speed to shift gears in Subject 3?

What is the solution for moisture inside the headlight?

How to Turn on the High Beam on a Citroën?

How to adjust the time on the ninth-generation Accord?

How many kilometers does the Atenza need to change the transmission oil?

How to Remove the Door Panel of a BMW 5 Series?

What to Do When Your ID Card Expires While Learning to Drive?

How long does it take to pick up a car after painting?

Does signing after Subject 3 mean passing?

What Causes the Squealing Sound When Braking?