Can Transmission Fluids Be Mixed?

1 Answers
Elrond
07/29/25 7:26pm
Transmission fluids cannot be mixed. When changing the fluid, it is essential to use the transmission fluid specified by the manufacturer. Below are the specific details about transmission fluid: 1. Physical Definition: Transmission fluid is a lubricant used to keep the gear system clean, ensuring the proper functioning of the transmission and extending the lifespan of the transmission components. 2. Classification: Depending on the transmission structure, transmission fluids are categorized into automatic transmission fluid (ATF) and manual transmission fluid. Automatic transmission fluid is specifically designed for automatic transmissions. Manual transmission fluid is used for lubricating hypoid gear drive shafts and manual transmissions that operate under harsh conditions with high impact loads.
Was this review help?
20
1
Share
More Forum Discussions

What does it mean when the airbag light is on?

The airbag light may illuminate due to the following reasons: 1. It lights up during engine self-check and turns off afterward; 2. Vehicle malfunctions such as airbag failure, clock spring failure, or impact sensor failure; 3. False alarms caused by low battery voltage triggering error codes. The airbag system, also known as the Supplemental Restraint System (SRS), primarily consists of two components: 1. Seatbelt pretensioners; 2. Airbags: mainly composed of impact sensors, airbag indicator lights, airbag control modules, and the airbags themselves. The connectors (plugs) linking these critical components are equally important – some feature dual-locking mechanisms to ensure reliable connections. For easy identification, all SRS connectors use yellow housings to distinguish them from other vehicle connectors.
13
5
Share

Where is the general car trunk switch located?

The trunk button is usually located on the door next to the driver's seat or on the smart key. Reasons why the trunk won't close: 1. Foreign objects blocking the trunk latch: When there are foreign objects in the trunk latch groove, it naturally won't close. Simply clean the latch groove. 2. Damaged trunk lock hook: If the trunk lock hook is damaged and deformed, it will block the trunk latch groove, preventing closure. In this case, the trunk lock hook needs to be repaired or replaced with a new part if necessary. 3. Overly stiff spring rod: An overly stiff spring rod can create excessive pressure when closing the trunk, making it impossible to close. In this situation, replace the spring rod with one of moderate stiffness. 4. Forgetting to take out the car key: Some cars, for the safety of occupants, won't allow the doors or trunk to close if the car key isn't taken outside the vehicle.
18
1
Share

Which Engine Oils Are Suitable for Winter Use in Cars?

For winter use in cars, engine oils with grades such as 0W, 5W, 10W, 15W, 20W, and 25W are more appropriate. The symbol W stands for winter, and the smaller the number before W, the lower the viscosity at low temperatures, the better the low-temperature fluidity, and the lower the applicable minimum temperature. The larger the number after W, the higher the viscosity, ensuring more stable protection at high temperatures. Engine oil serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption and cushioning. Engine oil consists of two parts: base oil and additives. The base oil is the main component of the lubricant, determining its basic properties, while additives compensate for and improve the deficiencies of the base oil, imparting certain new properties, making them an important part of the lubricant.
16
4
Share

What are the steps in the car painting process?

The steps in the car painting process are: 1. Cleaning, identification, and evaluation: After thoroughly cleaning the entire vehicle, identify the type of the old coating, assess the extent of damage to the workpiece, and determine the repair process; 2. Masking and degreasing: Protect the surrounding area of the damaged part with masking paper and degrease the area that needs sanding; 3. Removing old paint and feathering the edges: Select the appropriate type of sandpaper and sander to remove the old paint from the damaged area and feather the edges; 4. Applying putty: After cleaning and degreasing the workpiece, apply an appropriate amount of putty and dry it using an infrared lamp; 5. Spraying the primer coat; 6. Applying the guide coat and sanding the primer; 7. Sanding the transition area; 8. Cleaning: After sanding is completed and no issues are found, clean the surface of the fender with water and dry it.
15
4
Share

What are the differences between Santana and Jetta?

The differences between Santana and Jetta: 1. Different configurations: Santana focuses on human-machine interconnection and practical functional configurations, emphasizing technological features; Jetta emphasizes safety configurations. 2. Different body dimensions: Santana's body length, width, and height are 4475mm, 1706mm, and 1469mm respectively; Jetta's body length, width, and height are 4419mm, 1841mm, and 1616mm respectively. 3. Different powertrains: Santana is equipped with a 1.5L naturally aspirated engine, with a maximum power of 81kW, maximum horsepower of 110PS, and peak torque of 150Nm; Jetta is equipped with two naturally aspirated engines, 1.5L or 1.4L, with maximum power of 66kW and 81kW, maximum horsepower of 90PS and 110PS, and peak torque of 132Nm and 150Nm respectively.
1
2
Share

How to Check Tire Pressure on Golf 7?

Golf 7's method for checking tire pressure: The Golf 7 does not have a direct tire pressure monitoring system, so it does not display specific tire pressure values. The Volkswagen Golf 7's tire pressure monitoring indicator uses ABS sensors to compare the rolling circumference and rotation speed of each wheel. If the tire pressure of one or more wheels changes, the tire pressure loss indicator in the combination instrument and infotainment system display will issue an alert. The Golf 7 is a model under Volkswagen, equipped with the EA211 series 1.6L and 1.4T engines. The 1.6L engine has a maximum power of 81 kW and a maximum torque of 155 Nm, paired with a 5-speed manual or 6-speed automatic transmission. The 1.4TSI engine comes in two different tuning levels: the low-power version has a maximum power of 96 kW and a maximum torque of 225 Nm, while the top-end 1.4TSI version has a maximum power of 110 kW and a maximum torque of 250 Nm.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.