···
Log in / Register

Can traffic violations be handled by someone other than the vehicle owner?

3 Answers
Venus
07/29/25 1:17pm
Traffic violations can indeed be handled by someone other than the vehicle owner. If you have friends in the area where the violation occurred, you can directly send the original or copies of documents such as the violation notice, driver's license, vehicle registration certificate, and ID card to your friend, and ask them to handle it on your behalf. Below is an extended introduction: Traffic violation handling procedures: The general procedure applies in situations where, according to laws and regulations, penalties such as fines, temporary suspension or revocation of the driver's license, or fines for organizations are imposed. In such cases, an investigation must be conducted, evidence collected, and the penalty decision made following the general procedure.
Was this review help?
6
3
Share
KaydenDella
08/14/25 3:27am
Last time I dealt with a traffic violation, I was also confused about whether it's possible if it's not the vehicle owner. So I tried it myself once - I was too busy with work to go to the traffic police station, so I asked my brother to handle it with a copy of my ID card and a simple authorization letter. The procedure was actually quite simple: he brought the violation notice and relevant materials to the counter, and it was done in just a few minutes without requiring my presence at all. Of course, the key is to prepare copies of the vehicle owner's information. If someone else handles it for you, it's best to have written authorization to avoid future troubles. I recommend keeping copies of these documents ready at all times - it saves a lot of hassle when dealing with violations. I've heard that some online platforms can also handle it on your behalf now, like certain apps that support uploading authorization letters for remote processing, but it's best to personally verify the details to ensure everything is correct.
Was this review help?
14
1
Share
Expand All
VonGianna
10/10/25 2:10am
I think it's quite convenient to have someone else handle traffic violations for me. Last time my car had a violation, I was away on a business trip, so I had a family member take a photo of my ID and a simple authorization letter to handle it. The process was basically smooth—the staff only checked the license plate number, owner information, and the authorization letter, and the fine was paid quickly. However, some small details need attention, such as ensuring the violation location and date are accurate. If the authorization isn't formal, it might cause delays or more complicated issues. Additionally, if points are involved, the person handling it may need to verify their identity, so it's advisable for the owner to communicate all details in advance and keep copies of documents together. Occasionally, when helping friends with this, I’ve found that preparing in advance can greatly simplify the process, avoiding extra trips or wasted time.
Was this review help?
3
5
Share
Expand All
More Forum Discussions

Is it okay if the car scraped the chassis?

If the car scraped the chassis without any fluid leakage or mechanical deformation, it should be fine. The function of the chassis is to support and install the car engine and its various components and assemblies, forming the body shape, receiving the power from the engine to make the car move and maintain normal driving. The composition of the car chassis: it consists of the transmission system, steering system, driving system, and braking system. The maintenance methods for the car chassis are: 1. Check the oil condition of each important assembly in time; 2. Pay attention to the wear of brake pads and clutch plates; 3. Regularly perform four-wheel alignment; 4. Pay attention to the tire pressure and wear condition.
8
5
Share

How to Replace a Faulty Spark Plug?

To replace a faulty spark plug, follow these steps: 1. Wait for the engine to cool completely, open the hood, unplug the high-voltage pack connector, and remove the fixing bolts; 2. Use a socket wrench to loosen the nuts by turning counterclockwise; 3. Use a magnetic rod to extract the spark plug; 4. Attach the new spark plug to the magnetic rod and insert it into the hole; 5. Reassemble by following the above steps in reverse order; 6. Start the engine to check if the spark plug is functioning properly. The reasons for a faulty spark plug include: 1. Insufficient spark energy during ignition; 2. Excessive air-fuel ratio in the fuel mixture; 3. Overheating of the engine; 4. Dirty air filter; 5. Excessive idle speed; 6. Severe carbon buildup and use of low-quality gasoline; 7. Damaged valve oil seal or crankcase ventilation valve.
4
4
Share

Why is it difficult to engage reverse gear in a manual transmission?

The reasons why it is difficult to engage reverse gear in a manual transmission are: 1. The gear is not engaged and is in neutral; 2. The gear switch of the transmission is faulty; 3. The clutch is not fully depressed; 4. The synchronizer is not installed, causing the teeth to misalign with the gear; 5. The handbrake is not released, leaving the car in manual braking state. The steps to start a manual transmission car are: 1. After starting the car, press the clutch pedal all the way down with your left foot to completely disengage the clutch; 2. Shift the transmission into first gear; 3. Press or lift the electronic handbrake button; 4. Ensure safety by observing the road and other vehicles or pedestrians; 5. Continue to hold the clutch pedal with your left foot to keep the clutch disengaged, press the accelerator pedal with your right foot, and slowly release the clutch pedal with your left foot.
14
5
Share

What is the Volkswagen Teramont 330TSI?

Volkswagen Teramont 330TSI is the Volkswagen Touareg 330TSI model. Here are the specific details about the Volkswagen Touareg: 1. Powertrain: The Touareg is equipped with three powertrain options, including a 2.0T high/low-power version and a 2.5T V6 engine. The Touareg 330TSI model features a 2.0T engine with a maximum power output of 186 horsepower and a maximum torque of 320 Nm, paired with a 7-speed dual-clutch transmission. The power of the 330TSI model can meet the basic needs of daily driving. 2. Features: The vehicle comes with a multimedia information display that supports the App-Connect smartphone integration platform, compatible with Apple CarPlay and Android Auto. It also includes adaptive cruise control, lane keeping assist, blind spot monitoring, collision warning, heated steering wheel, front seat heating/ventilation, and a panoramic sunroof.
19
3
Share

What Causes the Jerking Sensation When Releasing the Clutch After Shifting Gears?

The reasons for experiencing a jerking sensation when releasing the clutch after shifting gears are: 1. Jerking during upshifting: The transmission's response speed is not fast enough, and the upshift speed cannot keep up with the driver's throttle input, resulting in a jerking sensation during gear changes. 2. Jerking during downshifting: When the driver releases the accelerator pedal or presses the brake pedal, the alternator starts working, placing a load on the engine and causing a mismatch between the engine speed and the clutch disc speed, leading to a jerking sensation. The working principle of the clutch is: 1. The torque generated by the engine is transmitted to the driven disc through the friction between the flywheel, pressure plate, and the contact surface of the driven disc. 2. When the driver depresses the clutch pedal, the diaphragm spring's large end moves the pressure plate backward through mechanical linkage, separating the driven components from the driving components.
20
4
Share

How to Turn Off a Motorcycle Alarm?

There are several methods to turn off a motorcycle alarm: you can directly use the key to turn on the power switch, which will deactivate the alarm state. When the key is not available, simply unplug the power connector and then plug it back in to deactivate the alarm state. Below is additional information about power locks: 1. By voltage: Power locks can be categorized into low-voltage power locks and high-voltage power locks based on voltage levels. Low-voltage power locks are mainly used in small appliances, electric toys, and electric vehicles. High-voltage power locks are primarily used in machine tools, elevators, etc. 2. By the number of controlled circuits: Power locks can be divided into single-circuit power locks, dual-circuit power locks, and multi-circuit power locks. A single-circuit power lock can only control one circuit. A dual-circuit power lock can simultaneously control two circuits.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.