Can Traffic Violations Be Checked on the Same Day?

3 Answers
OAlex
07/28/25 6:40am
Generally, traffic violations cannot be checked on the same day they occur. Violations captured by cameras usually take about two days to be processed, while those issued with a ticket or citation may take up to 15 days. Under special circumstances, the processing time might be extended. Typically, it takes 3-7 days for a traffic violation to appear in the system after it occurs, as the traffic police department needs to input and verify the information. The latest it should appear is within 13 working days. Below are some common traffic violations: 1. Running a Red Light: Running a red light is one of the most common violations. According to the new traffic regulations, this offense results in a deduction of 6 points from the driver's license. 2. Driving Without a License: If a driver continues to operate a vehicle while their license is suspended, they will face a fine and up to 15 days of detention. Driving without a valid license or after a license has been revoked will result in 15 days of detention and a fine. 3. Overloading or Overcrowding: For passenger vehicles exceeding the allowed capacity by less than 20% or cargo vehicles exceeding the allowed weight by less than 30%, a fine will be imposed. If the excess is 20% or more for passenger vehicles or 30% or more for cargo vehicles, a higher fine will be applied. 4. Drunk Driving: Driving under the influence of alcohol will result in a 3-month suspension of the driver's license and a fine. If the vehicle is used for commercial purposes, the same penalties apply. 5. Speeding: If a vehicle exceeds the speed limit by 50% or more, the driver will face a fine and revocation of their driver's license.
Was this review help?
1
3
Share
DeKennedy
08/11/25 2:35pm
It's definitely possible to get caught for driving the wrong way on the same day—I've personally witnessed how quickly they can nab you. Traffic monitoring systems are incredibly advanced now, especially on major roads in big cities, where high-definition cameras and smart algorithms operate 24/7. The moment a car drives the wrong way, the system immediately captures the license plate and uploads it to the command center. The data is usually processed within minutes, and the violation record is generated that same day. However, in smaller streets or suburban areas with fewer cameras, it might take longer to enter the system. The key issue is that driving the wrong way is extremely dangerous and can easily lead to serious accidents. I recommend paying close attention to navigation and road signs before driving. It's best to develop the habit of regularly checking your vehicle's condition and not taking chances. Safety comes first—a ticket is a minor issue, but an accident can be deadly.
Was this review help?
2
1
Share
Expand All
WestonLynn
09/27/25 8:26am
I was also curious about this issue before, and it turned out a friend of mine experienced it: accidentally driving the wrong way on the highway, caught by traffic cameras that afternoon, which automatically triggered an alert, and the police contacted him quickly. Nowadays, many road sections have real-time monitoring with cameras and sensors working together to capture violations instantly, and the data is directly uploaded to the cloud platform. The efficiency is incredibly high, though it might be a bit slower in rural or less developed areas. My advice is to use navigation apps more often while driving to get immediate alerts if you mistakenly enter a wrong-way lane. Don’t assume no one is watching—technology waits for no one, and handling violations early saves a lot of hassle.
Was this review help?
15
3
Share
Expand All
More Forum Discussions

Can an 18-year-old obtain a B2 driver's license?

No, according to Article 12 of the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses,' applicants for the large truck (B2) driving category must be at least 20 years old. Here is some relevant information about the B2 license: B2: The B2 license allows the holder to drive heavy-duty, medium-duty cargo trucks or large, heavy, and medium-sized special-purpose vehicles. Heavy-duty and medium-duty cargo trucks are mainly trucks, such as the large dump trucks commonly seen on roads, which fall under the category of heavy-duty trucks. Special-purpose vehicles: Large, heavy, and medium-sized special-purpose vehicles refer to vehicles equipped with specialized devices or equipment, such as water sprinklers, concrete mixer trucks, fire trucks, etc.
8
5
Share

What items are required for Subject 3 test?

An ID card is required. Below is relevant information: Users only need to bring their ID card for queuing and entering the examination site, as well as for vehicle verification. No other materials are required, except for Subject 4 when additional documents will be needed. A valid original ID card or a valid original temporary ID card is mandatory. For those applying for a driver's license outside their registered residence, a valid original local residence permit must also be carried. Additional information: Exam challenges: Speed and gear mismatch: Errors related to high gear at low speed or low gear at high speed should be noted during the test. Straight-line driving deviation: Many trainees intentionally slow down due to concerns about not driving in a straight line, which is not advisable during the driving process.
7
3
Share

Why does the speedometer of the Xiali N5 not move?

It is necessary to troubleshoot to determine the actual cause of the fault. Possible causes of the fault include: Damaged speed sensor; Broken wiring at the transmission; Grounding fault; The clip at the connection between the odometer and the transmission is loose. Composition of the speedometer: The speedometer consists of two gauges: the speed gauge and the odometer. The odometer is a digital instrument that calculates rotation by engaging the components on the calculator's gear. It mainly obtains mileage signals from the speed sensor and can retain data even without power. There are usually two manifestations when the speedometer does not move: one is when the needle stays at the 0 position and does not move, which is usually caused by internal wiring disconnection or short circuit. The other is when the needle stays at the high position and does not move, commonly known as "running off the dial," which can be resolved by readjusting it. If it is found that the needle does not move at the 0 position and the mileage number does not change, it indicates a speed sensor fault or a wiring fault between the instrument and the sensor.
10
0
Share

How to Deal with Stickers on a Car?

Ensure that the cleaner used on the car body is specifically designed for car washing. If no cleaner is available, washing the car body with detergent diluted in water is also acceptable. Shake the cleaner well before use, then spray it vertically on the water stain areas of the vehicle. After spraying, let it sit for a while to allow the cleaner to fully penetrate the water stains. Use a clean cloth to wipe the water stain areas of the car body back and forth.
7
5
Share

What Lights to Use When Driving Closely Behind Another Vehicle at Night?

Low beam headlights. Low beam headlights are designed for close-range illumination, with design requirements focusing on a wide coverage area of approximately 160 degrees, short projection distance, and non-adjustable focus. Below is relevant information: Article 48 of the Road Traffic Safety Law stipulates that on roads without central barriers or center lines, drivers must switch to low beams when meeting an oncoming vehicle at a distance of more than 150 meters at night, and must use low beams when encountering non-motor vehicles on narrow roads or bridges. When driving at night on roads without streetlights, under poor lighting conditions, or in low visibility situations such as fog, rain, snow, dust, or hail, vehicles traveling in the same direction and following closely behind another vehicle should use low beams. Additionally, when passing through sharp curves, slopes, arched bridges, crosswalks, or intersections without traffic signal control at night, drivers should alternately use high and low beams to signal.
6
5
Share

Will running a red light on national highways generally be captured?

Running a red light on national highways is generally captured. Criteria for determining a red light violation: Electronic monitoring devices capture three photos as evidence for a red light violation: the front wheels crossing the stop line, the rear wheels crossing the stop line, and the front wheels crossing the opposite stop line. Only when all three photos are present will it be considered a red light violation. How to avoid running a red light while driving: When there are arrow signals, follow the arrow lights; otherwise, follow the circular lights; When the red light is on, the front of the vehicle must not cross the stop line; When the yellow light is on, the front of the vehicle must not cross the stop line; When the green light just starts flashing, if you are close and moving fast, you should proceed, as braking might not stop you in time to avoid crossing the stop line; if you are far away, moving slowly, or the intersection is congested, you should stop; When driving in the city, develop the habit of looking for traffic lights whenever you see a crosswalk or stop line or approach an intersection.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.