Can Traffic Violation Points Be Processed on Weekends?

1 Answers
PiperLee
07/25/25 2:04pm
Traffic violation points can be processed on weekends, as traffic police departments have staff on duty who can handle such matters normally. The steps for processing traffic violation points are as follows: 1. The vehicle driver must bring their ID card, driver's license, and vehicle registration certificate to the traffic police department staff, who will confirm the vehicle's violation information and print out a penalty decision; 2. Take the penalty decision to the designated bank to pay the fine. Once the fine is paid, the violation will be cleared; 3. The printed penalty decision must be paid within 15 days. After 15 days, a 3% late fee will be charged daily, but the total late fee must not exceed the total amount of the fine.
Was this review help?
14
0
Share
More Forum Discussions

How to Use the Heating System in the 10th Generation Accord?

Before using the heating system in the 10th Generation Accord, you need to wait for the engine's coolant temperature to rise to a certain level. The heating control knob has red and blue color markings on both sides—typically, the cold setting is on the left, and the warm setting is on the right. Turning the knob to the left lowers the car's temperature, while turning it to the right raises the temperature. Once the engine's coolant temperature has risen, you can turn on the air conditioning by adjusting the fan speed control. Below is an introduction to using the heating system in the Accord: 1. During winter, when starting the engine, the coolant temperature is still relatively low. In this state, you should not use the heating system because the air blown out by the AC will be cold. Turning on the AC immediately will not only fail to raise the interior temperature but also increase the engine's workload. 2. When starting the car cold, you should drive for a while until the engine's coolant temperature rises and stabilizes at around 90 degrees Celsius. At this point, you can turn on the car's heating system. Set the air circulation to external mode first to expel cold air from the cabin, then switch to internal circulation. The interior temperature will rise quickly afterward.
16
2
Share

What models are available in the Mercedes-Benz C-Class?

The Mercedes-Benz C-Class offers four models: C180, C200, C260, and C300, available in Euro 5 and China 6 versions. The dimensions of the current C-Class models are 4704mm in length, 1810mm in width, and 1454mm in height, with a wheelbase of 2840mm. The C-Class is equipped with three engine options: 1.5T, 1.6T, and 2.0T, paired with an automatic transmission. The 1.5T engine delivers a maximum output power of 135 kW and a peak torque of 280 Nm, with a top speed of 236 km/h and a 0-100 km/h acceleration time of 8.3 seconds. The 1.6T engine produces a maximum output power of 115 kW and a peak torque of 250 Nm, achieving a top speed of 221 km/h and a 0-100 km/h acceleration time of 9.1 seconds. The 2.0T engine offers a maximum output power of 190 kW and a peak torque of 370 Nm, with a top speed of 250 km/h and a 0-100 km/h acceleration time of 6.2 seconds.
14
2
Share

How Many Liters of Transmission Fluid Does a Porsche 718 Need?

Porsche 718 requires approximately 6 liters of transmission fluid. The more common methods for replacing transmission fluid are gravity drainage and machine-assisted fluid exchange. Transmission fluid replacement should be performed by a professional technician at a repair shop. Details are as follows: 1. Gravity Drainage. The vehicle is lifted, the transmission pan drain plug at the bottom is loosened, and the transmission fluid will naturally drain out. Once no more fluid flows out, the plug is tightened, and new transmission fluid is added. This method is cost-effective and straightforward, but the replacement rate is relatively low, as the old fluid in the internal valve body and torque converter cannot be fully drained. Gravity drainage can only replace about 50% of the transmission fluid. 2. Machine-Assisted Fluid Exchange. The machine is connected to the vehicle, and by starting the engine, the automatic transmission provides pressure to the machine, enabling it to circulate and exchange fluid with the transmission. This method releases more old fluid, but typically requires around 10 liters of transmission fluid. Additionally, specialized equipment is needed, and the replacement process takes longer.
7
3
Share

How many meters can you drive in first gear during the third driving test?

During the third driving test, the maximum distance you can drive in first gear is 200 meters. Here are the specific details about the driving distance in first gear for the third driving test: 1. Specific requirements for driving distance: During the third driving test, you cannot exceed 50 meters in first gear or 150 meters in second gear in a single drive. The cumulative distance for first and second gears cannot exceed 200 meters. The distance is recalculated after the vehicle comes to a stop. You cannot change gears arbitrarily while driving. 2. Notes on gear shifting in the third driving test: Do not look down at the gearshift; do not shift gears without fully depressing the clutch; do not keep the clutch depressed for a long time; do not skip gears when upshifting. In the moment you look down, you won't know what might happen ahead on the road, and even if you notice something, you won't be able to take timely action. Although this action seems minor, it can easily lead to traffic accidents.
10
0
Share

How to Adjust the Height of Civic Seat Belt?

Press the button on the seat belt switch and simultaneously move the adjustment device up or down. Below are the specific steps to adjust the seat belt: 1. The adjuster is located on the decorative panel of the center pillar. First, pinch the button with both hands and pull it outward (transverse to the vehicle body), causing the button cover to come off. Then, drag the button up or down (longitudinal to the vehicle body) to adjust the position of the webbing. Once the desired position is reached, stop pulling the button and perform slight height adjustments. When a clicking sound is heard, it indicates that the height adjustment is properly set and locked in place. 2. Adjusting the seat belt height can enhance both comfort and safety. The driver can move the adjuster up or down to fit the seat belt to drivers of different heights. The adjuster is located on the decorative panel of the center pillar, which is the retraction point of the upper part of the seat belt. The height adjuster is designed to accommodate different heights, as a seat belt positioned too high may easily tighten around the neck during an emergency, potentially causing unnecessary injuries.
20
2
Share

What is the tire size of the Zotye T600?

Its length, width, and height are 4631mm, 1893mm, and 1694mm respectively, with a wheelbase of 2807mm. Below is the relevant introduction about the tires of the Zotye T600: 1. The tire model of the Zotye T600 is 235/60R18. Tire models are commonly represented by a set of numbers, where the first number indicates the tire section width, and the latter indicates the rim diameter in inches. Some tires also contain other letters or symbols with special meanings, such as X for high-pressure tires, C for reinforced tires, and B for bias tires. The Zotye T600 is a mid-size SUV under the Zotye brand. In terms of power, the vehicle is equipped with a 1.5L turbocharged engine, with a maximum power of 119kw and a peak torque of 215nm, paired with a 5-speed manual transmission. 2. The tires used on the T600 are from Qingdao Luhang. For most consumers, Qingdao Luhang tires are not a well-known brand. The CLV2 series used in the sports version is defined by Luhang as a full-condition SUV-specific tire, paired with 18-inch double five-spoke wheels for a sporty and visually appealing effect.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.