Can Traffic Management 12123 Handle Violations and Pay Fines?

1 Answers
Jasmine
07/29/25 9:45pm
Traffic Management 12123 can handle violations and pay fines. The relevant details are as follows: 1. Prerequisites for handling violations on Traffic Management 12123: Violations can be handled on Traffic Management 12123, but the fine must be below 200 yuan, and the total points for the violation to be processed plus the driver's current accumulated points must not reach 12 points. In addition, drivers can also pay fines for simple procedure penalties issued by traffic police on the spot through the Ministry of Public Security's Traffic Management Service Internet Platform. 2. Handling non-scoring violations for non-personal motor vehicles: On the basis of meeting condition 1, drivers can also self-handle non-scoring traffic violations for non-personal motor vehicles on the platform.
Was this review help?
6
5
Share
More Forum Discussions

What are the reasons for abnormal noise when pressing the car accelerator?

The reasons for abnormal noise when pressing the car accelerator are: 1. Excessive clearance or poor lubrication of the drive shaft; 2. Improper assembly, causing high torque output and friction; 3. Engine knocking; 4. Lack of engine oil or low oil pressure; 5. Damage to the clutch release bearing; 6. Air leakage in the engine intake pipe. Solutions for abnormal noise when pressing the car accelerator: 1. Check for air leakage in the engine intake pipe; 2. Check if there are any issues with the air filter installation; 3. Check for aging, looseness, or slipping of the engine belt; 4. Check the wear condition of the clutch.
5
2
Share

What Does the Engine Lubrication System Consist Of?

The engine lubrication system consists of components such as the oil pump and pressure relief valve. The fundamental task of the lubrication system is to continuously supply lubricating oil to the friction surfaces of various parts, reducing friction and wear. The basic functions of the lubrication system are as follows: 1. Oil delivery: Continuously delivering clean oil to the friction surfaces of engine components to reduce friction resistance and wear. 2. Damage prevention: The flowing oil also carries away heat generated by friction and metal particles from wear, preventing component temperature rise, damage to the fit clearance, and adverse consequences, while also preventing abrasive wear of parts. 3. Sealing: Due to the viscosity and adsorption properties of the lubricant, an oil film is formed, enabling the oil to act as a seal.
3
0
Share

What are the reasons for a motor vehicle lacking power?

Motor vehicle lacking power can be attributed to: 1. Clogged fuel injectors, fuel line leaks, reduced fuel pump performance, or a blocked fuel filter; 2. A clogged air filter or throttle system; 3. Poor quality gasoline; 4. Cracks in the intake pipe or loose connections causing air leaks. Solutions for a motor vehicle lacking power: 1. Regularly clean the fuel system; 2. Use high-quality engine oil or gasoline; 3. Remove carbon deposits from spark plugs and the throttle using cleaning agents and physical friction methods; 4. Replace engine oil and oil filters promptly; 5. Check the intake pipe for any leaks; 6. Inspect the fuel injection system.
2
0
Share

What are the differences between GL4 and GL5 gear oils?

GL4 and GL5 gear oils are introduced as follows: 1. Introduction 1: First of all, GL-4 grade is a medium-load gear oil, suitable for differential gears, transmission gears, and steering gears, while GL-5 is a heavy-load gear oil, suitable for differential gears and rear axle gears that operate under particularly harsh conditions. 2. Introduction 2: Compared with GL-4 grade gear oil, GL-5 grade gear oil contains more sulfur, almost half more acidic, so its corrosiveness is naturally stronger. In terms of price, since GL-5 gear oil is one grade higher than GL-4, it is naturally more expensive. However, some friends have a misconception that using more expensive gear oil will be beneficial for the car.
4
2
Share

What is the method for beginners to brake when driving?

New drivers should follow these braking methods: 1. Release the brake once before the vehicle comes to a complete stop; 2. Press the brake pedal firmly during emergency braking; 3. Apply gentle braking over long distances; 4. Reduce speed and utilize engine braking when turning. The braking system consists of a vacuum booster pump, master cylinder, wheel cylinder, brake pads, and brake discs. Brake maintenance methods include: 1. High-temperature protection to prevent corrosion in the braking system, avoid brake pad seizure due to high temperatures, and eliminate brake squeal; 2. Clean brake discs, drums, and any components from oil stains, dirt, and friction dust to ensure proper heat dissipation; 3. Regularly replace brake fluid; 4. Periodically check the thickness of brake pads or shoes.
11
3
Share

When to Use ECON Mode?

ECON mode enables the vehicle to enter a low-carbon and eco-friendly driving mode, which delivers significant fuel-saving effects under gentle driving styles. If you find such driving experience acceptable during usage, it is recommended to keep the ECON button activated all-weather. Here is more information about ECON: 1. Simply pressing the ECON button assists drivers in improving driving habits, further enhancing fuel efficiency while ensuring a smooth and enjoyable driving experience. 2. ECON effectively controls unnecessary fuel consumption caused by sudden throttle inputs by regulating valve opening/closing, and intelligently adjusts refrigeration conditions to keep the air conditioning in an energy-saving state, thereby reducing engine energy consumption. This achieves true harmony between driver and vehicle, ushering in a new era of environmental protection.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.