Can Tires Be Replaced One by One?

1 Answers
OJoseph
07/30/25 12:16am
Tires can be replaced one by one. Here are some considerations for tire replacement: 1. Pay attention to the front and back sides of the tire: The so-called front and back sides of the tire specifically refer to which side needs to face outward. The tread pattern that appears the same on both sides actually has a direction. If installed incorrectly, it may cause uneven tire wear. When installing the tire, simply install the side with numbers facing the front of the hub. However, different manufacturers have different labeling methods. For example, some brand tires will mark "OUTSIDE" on the sidewall of the tire. After installing the tire, there is another essential step, which is to adjust the dynamic balance. 2. Pay attention to the distinction between new and old tires: The difference between new and old tires is obvious when placed together. The depth of the tread pattern and the color of the rubber are distinctly different. The small particles on the new tire and the hairs on the sidewall indicate that the tire has not been driven on, which is a sign of a brand-new tire.
Was this review help?
6
2
Share
More Forum Discussions

Which Honda is the Odyssey?

Odyssey is a luxury MPV produced by GAC Honda, belonging to GAC Honda. The Honda Odyssey is a 7-seater vehicle that meets the standards of a luxury MPV. An MPV is a multi-purpose vehicle with a relatively large interior space, suitable for family trips, such as the Honda Odyssey, Buick GL8, and Toyota Alphard. Here are some details about this vehicle: 1. The Odyssey is a luxury SUV produced by GAC Honda, with a body length, width, and height of 4845mm, 1802mm, and 1697mm, respectively. 2. In terms of power, the Honda Odyssey is equipped with a 2.4L Earth Dreams engine, with a maximum power of 137kW (186PS) and a peak torque of 243Nm, paired with a CVT transmission.
12
2
Share

How Long Does the Tire Pressure Monitoring System Last?

The battery of a tire pressure monitoring system typically lasts 3-5 years, with the exact lifespan depending on the vehicle's usage conditions. If the vehicle is driven frequently or in harsh environments, the battery life of the tire pressure monitoring system will be shorter. Below is relevant information about tire pressure monitoring: Function of Monitoring: It can alert the driver when abnormal tire pressure is detected, prompting timely action to prevent serious accidents. Additionally, under the same mileage, insufficient tire pressure can increase fuel consumption by 3.3%. The tire pressure monitoring system helps keep track of tire conditions, preventing blowouts and promoting fuel efficiency and environmental protection. Effects of Overinflated Tires: When tire pressure is too high, the contact area between the tire and the ground decreases, increasing the pressure on the tire and reducing its grip. Moreover, when driving over bumps or uneven surfaces, the tire's ability to absorb shocks is compromised, affecting driving stability and ride comfort while also increasing the impact on the suspension system.
13
3
Share

Which is safer, front-wheel drive or rear-wheel drive?

Driving 5,000 kilometers is sufficient. Reason: During the break-in period of a new car, high-speed driving above 90 km/h should be avoided. When the new car has driven about 5,000 kilometers and is about to complete the break-in period, the owner can briefly run the engine above 4,000 RPM to reduce carbon buildup and improve engine performance. Other break-in considerations for new cars: Avoid driving at full load during the break-in period: Excessive load increases the burden on the engine and transmission, leading to excessive power output and accelerated wear of components. Therefore, owners should be aware of their car's maximum load capacity and avoid driving at full load during the break-in period to extend its service life. Avoid prolonged use of low gears: Owners should avoid prolonged use of low gears and intentionally allow each gear to undergo the break-in process. For automatic transmission models, although the manual gear-shifting break-in process is eliminated, owners should accelerate continuously under good road conditions to allow the transmission to smoothly shift up and avoid insufficient break-in for higher gears.
17
3
Share

What Does Heavy Steering Mean?

In theory, front-wheel drive vehicles are safer. However, some rear-wheel drive vehicles can achieve similar or even better safety levels than front-wheel drive vehicles through better design. There are various types of vehicle drivetrain configurations, such as front-engine front-wheel drive (FF), front-engine rear-wheel drive (FR), and front-engine four-wheel drive (4WD). Typically, front-wheel drive vehicles have a transversely mounted engine, while rear-wheel drive vehicles usually have a longitudinally mounted engine. Below are the differences between front-wheel drive and rear-wheel drive: Engine Configuration: Front-wheel drive vehicles have a transversely mounted engine, which is positioned forward and offers more space; rear-wheel drive vehicles have a longitudinally mounted engine, which occupies rear passenger space. Exterior Design: Front-wheel drive vehicles tend to have longer front suspensions and longer hoods; rear-wheel drive vehicles have shorter front suspensions and shorter hoods. Driving Experience: Front-wheel drive vehicles are pulled by the front two wheels, while rear-wheel drive vehicles are pushed by the rear two wheels.
16
3
Share

What is covered under the sedan three-guarantee policy?

Automobile three-guarantee policy includes that if quality problems occur in vulnerable parts of household automobile products during the warranty period, consumers can choose to replace the vulnerable parts for free. For this purpose, it specifically lists 16 types of vulnerable parts, including tires, bulbs, batteries, wiper blades, spark plugs, four major filters (air, air conditioning, fuel, oil), brake fluid, brake friction pads, remote control batteries, clutch plates, transmission oil, engine oil and coolant, and hydraulic oil. If car owners want to prove whether there are quality problems with the vulnerable parts of the car body, it requires a lot of manpower, material resources, and financial resources to provide evidence and inspection, etc. Many car owners have to give up their rights and pay for the repair and replacement of vulnerable parts themselves. Currently, the new three-guarantee policy requires manufacturers to replace vulnerable parts, and manufacturers should clearly specify the types and warranty period on the three-guarantee certificate. Manufacturers should clearly indicate the types and scope of vulnerable parts.
9
3
Share

What are the engine specifications of the Great Wall Saifei?

Great Wall Saifei adopted the Toyota 4Y engine technology to produce the model 491QE-2.2L-106 horsepower L4 engine. This engine is a 491QE multi-point fuel injection engine with a displacement of 2.3 liters, power output of 75 kilowatts, emission compliance with Euro II standards, and a top speed of 140 kilometers per hour. More details are as follows: 1. The Saifei's braking system is equipped with a load-sensing proportional valve to ensure reasonable distribution of braking force between the front and rear wheels. The four-link spiral spring rear suspension enhances ride comfort. 2. The Saifei is also fitted with 235 wide tires, providing strong grip during high-speed driving and the ability to pass through various complex and harsh road conditions. Among them, the four-wheel-drive Saifei has even stronger off-road capabilities.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.