···
Log in / Register

Can the XPeng P7's sunroof be opened?

5 Answers
RoseDella
07/29/2025, 10:33 AM

The XPeng P7's sunroof cannot be opened because it is a single piece of tempered glass. Location of the car sunroof: The car sunroof is installed on the roof, effectively allowing air circulation inside the vehicle and increasing the intake of fresh air. At the same time, the sunroof can also provide a wider view and meet the needs of mobile photography and videography. Classification of car sunroofs: Car sunroofs can be roughly divided into: sliding-out type, built-in type, built-in flip-out type, panoramic type, and curtain type. They are mainly installed on commercial SUVs, sedans, and other models. Car sunroofs change the traditional form of ventilation, with the incoming wind forming an airflow that draws out the stale air inside the cabin.

Was this review help?
3
4
Share
DelIsla
08/13/2025, 02:55 AM

The panoramic sunroof on the Xpeng P7 is definitely a highlight, featuring a sleek fixed-glass design that spans the entire roof (though it doesn't open). When I drove my friend's P7 on the highway, the unobstructed view was incredible – perfect for stargazing at night. Engineers explained this design reduces wind noise and improves cabin sealing for a quieter, more comfortable ride. Ventilation is handled entirely by the AI climate system, which automatically adjusts airflow and modes based on temperature. I've tested the voice control too – just say "adjust airflow" and it responds instantly. While the non-opening design might seem like a small drawback, it brings energy efficiency and peace of mind with no mechanical parts to maintain. Just keep the glass clean during routine maintenance to preserve that open, airy feeling – the panoramic view makes it totally worthwhile.

Was this review help?
4
4
Share
Expand All
EvangelineDella
10/10/2025, 11:09 PM

The XPeng P7 features a fixed panoramic glass roof that cannot be opened, something I noticed during my daily commute. The design prioritizes quietness and efficiency, as an openable sunroof would increase wind resistance and noise. Ventilation is handled by the dual-zone automatic climate control system inside the car—just set the air circulation mode (fresh or recirculated), and the fan speed adjusts automatically, which is quite smart. In winter, the warm sunlight streaming in is pleasant, while in summer, simply pull down the sunshade to block the heat. The advantage is simpler maintenance—no worries about rusting tracks or leaks—but the glass needs regular cleaning to prevent dust buildup. The P7’s responsive AC system compensates for the lack of ventilation, and overall, I think it’s well-balanced, with minimal impact on the driving experience.

Was this review help?
12
0
Share
Expand All
McPeter
11/23/2025, 11:16 PM

I understand that the XPeng P7 features a fixed panoramic glass roof that cannot be opened. Compared to an openable sunroof, this design saves the weight of mechanical components, thereby improving the vehicle's range. The tempered glass blocks most UV rays to protect the interior and offers high safety without the risk of accidental jamming. Air conditioning and ventilation are key, with the P7 supporting voice commands to adjust airflow. Maintenance is simple, requiring only glass cleaning without the need to inspect tracks. This design aligns with the modern trend of electric vehicles, emphasizing reliability and cost-effectiveness.

Was this review help?
10
3
Share
Expand All
DelilahDella
01/14/2026, 12:48 AM

The XPeng P7's sunroof is designed as a fixed panoramic panel that cannot be opened. I've compared it with the Tesla Model 3 Standard Range, which has a similar setup. XPeng opted for this design primarily to control costs and optimize aerodynamics by reducing wind resistance. Ventilation is handled by the car's climate control system, with the P7's intelligent temperature management automatically adjusting settings. The AC cools the cabin rapidly in summer. The glass roof provides excellent natural lighting to enhance the interior ambiance, but remember to use the sunshade to prevent excessive heat. The non-opening design makes cleaning easier – just spray some glass cleaner periodically for maintenance, which is far more convenient than dealing with an operable sunroof.

Was this review help?
3
4
Share
Expand All
More Forum Discussions

Can National 5 Vehicles Be Registered?

National 5 vehicles can still be registered in regions or cities where the National 6 standard has not been implemented. However, in some areas or cities where the National 6 standard has already been implemented, National 5 vehicles cannot be registered. Below is relevant information about vehicle registration: 1. Before Registration: Registration first requires the vehicle's certificate of conformity. Keep the triplicate invoice for the vehicle purchase, then pay the vehicle purchase tax and obtain the main and auxiliary tax certificates before registering at the vehicle management office. 2. Selecting a License Plate After Approval: After the vehicle passes inspection, you can proceed to choose a license plate. 3. Regulations for Vehicle Registration: If you have obtained a motor vehicle but have not yet registered it and need to drive it temporarily within the administrative region, a temporary license plate valid for no more than 15 days will be issued.
10
2
Share

How to Repair a Broken Fender Liner?

When the fender liner is broken, it needs to be repaired at a professional repair shop, as car owners cannot fix it themselves. The fender, also known as the wing panel, is divided into front and rear fenders based on its installation position. Nowadays, some cars have fenders integrated into the body as a single unit during production. However, some cars have independently assembled fenders, especially the front fenders, as they are more prone to collisions and are easier to replace as a whole. Below are the steps to remove the fender liner: 1. First, use a jack to align with the support points under the car, then lift the chassis and remove the tire. 2. Next, remove the screws and clips securing the fender liner and take out the damaged fender. Of course, clean any mud or debris under the fender. 3. Finally, install the new fender by following the reverse steps of the removal process.
17
0
Share

Where is the Peugeot 508's Cabin Air Filter Located?

The Peugeot 508's cabin air filter is located above the accelerator pedal under the dashboard on the driver's side, hidden at the bottom of the center console. The steps to replace the air filter are: 1. Remove the cover plate in contact with the outside of the right foot; 2. Remove the cover plate below the steering wheel; 3. Open the side cover of the cabin air filter; 4. Take out the cabin air filter for replacement. The Peugeot 508 has a body length, width, and height of 4826mm, 1855mm, and 1465mm respectively, with a wheelbase of 2815mm. The Peugeot 508 is equipped with a 2.0L engine, which has a maximum power of 147PS and a maximum torque of 200Nm, paired with a 5-speed manual transmission.
4
1
Share

What is the part above the bumper called?

The part above the bumper is called the bumper tow hook cover. Opening this cover reveals the towing hook installation point of the vehicle. Below is an introduction about bumpers: 1. Function of the bumper: The bumper is a device designed to absorb and mitigate external impact forces during collisions, providing a cushioning effect to protect both the vehicle and its occupants. 2. Plastic bumpers: They are designed to harmonize with the vehicle's body shape and achieve lightweight construction. Plastic bumpers consist of three parts: the outer panel, buffer material, and crossbeam. 3. Role of plastic bumpers: Plastic bumpers offer strength, rigidity, and decorative appeal. From a safety perspective, they provide a cushioning effect during collisions, protecting the front and rear body of the vehicle. Aesthetically, they integrate seamlessly with the vehicle body, forming a unified appearance and serving as an important decorative component of the vehicle's exterior.
15
2
Share

How to Replace the Battery in a Cadillac Key Fob?

Steps to replace the battery in a Cadillac key fob: 1. Remove the mechanical key to reveal the seam on the plastic casing; 2. Use a tool to gently pry along the edge until the gap is wide enough to open the key cover; 3. Note the orientation of the battery's positive and negative terminals and remember it, then remove the old battery and replace it; 4. Close the key cover, ensuring proper alignment to avoid damaging the internal circuitry during reassembly. Below is some related information about Cadillac: 1. Cadillac is a mid-to-large-size sedan with dimensions of 5103 mm in length, 1852 mm in width, and 1502 mm in height, and a wheelbase of 2837 mm. 2. Cadillac is equipped with a turbocharged engine that delivers a maximum power output of 198 kW, a maximum torque of 353 Nm, and a maximum horsepower of 269.
11
2
Share

What Causes the Slight Fluctuation of the Needle During Car Idling?

The slight fluctuation of the needle during car idling is caused by: 1. Oil stains or carbon deposits on the throttle valve, oil stains or carbon deposits around the intake tract of the throttle valve, oil stains or carbon deposits on the idle stepper motor, duty cycle solenoid valve, or rotary solenoid valve; 2. Damage or sticking of the throttle valve motor, idle stepper motor, duty cycle solenoid valve, or rotary solenoid valve; 3. Faults in the air flow meter or its circuit, faults in the intake pressure sensor or its circuit, poor contact due to water ingress in the engine control unit connector, or internal faults in the computer. The solution to the slight fluctuation of the needle during car idling is to clean the intake pipe and fuel injector to ensure smooth fuel injection, thorough engine combustion, and stable operation.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.