···
Log in / Register

Can the X-Trail's trunk be opened with the remote control?

5 Answers
LucyRose
07/29/2025, 02:53 PM

The luxury version of the X-Trail can open the trunk with the key. Normally, you just need to press and hold the button for three seconds. Below is a detailed introduction about the car trunk: Overview: The trunk of a car is the area where spare items and cargo are stored. Since compact cars are divided into hatchbacks and sedans, the size of the trunk also varies accordingly. Other Information: Under normal circumstances, the trunk usually contains the car's spare tire, emergency kit, tool kit, warning triangle, fire extinguisher, car refrigerator, emergency fuel cap release cable, etc. Some SUV and MPV models are also equipped with an emergency flashlight.

Was this review help?
9
5
Share
LaManuel
08/14/2025, 08:38 AM

I remember driving a Qashqai before, and it indeed allowed opening the trunk with the remote key. The specific operation was to press and hold the trunk button on the key for a few seconds until you hear a click, and the trunk would pop open. This was especially handy when your hands were full carrying items. However, note that some lower trim versions don’t have this feature—it depends on the model year. For example, only the 2019 Intelligent Edition and above included it. If it doesn’t respond, try replacing the key battery or check if the trunk lock is stuck. Nowadays, many new cars even have hands-free trunk opening, where it automatically opens when you stand near the rear—more convenient than the remote. The top-trim Qashqai seems to have this feature too. It’s always good to check the owner’s manual, as it details the exact steps and supported vehicle configurations.

Was this review help?
17
1
Share
Expand All
StJesse
10/14/2025, 10:02 PM

My family's X-Trail has been in use for over three years, and the trunk is mostly opened remotely. By pressing and holding the trunk button on the key for about two seconds, the car lights will flash once and then the trunk pops open automatically. This feature is super practical, especially on rainy days or when returning from shopping—no need to fumble for the keyhole. However, older base models might not have this function; my neighbor's 2017 model doesn't have this button. Also, a reminder: don't overload the trunk, or it might get stuck when popping open—I've encountered this situation once. If the key fails, don't panic; there's an emergency manual button on the left side of the driver's seat inside the car. Nowadays, many domestic cars come standard with remote trunk opening, and it would be great if Nissan could equip all its models with this feature.

Was this review help?
20
5
Share
Expand All
McReid
11/27/2025, 09:53 PM

The remote trunk opening feature of the Qashqai varies by trim level. Models like the Luxury trim and above generally support this function. Look for the trunk icon button on the key fob, press and hold for 2-3 seconds to activate. The mechanism works via wireless signal controlling the lock motor, similar to door locks. Base trim models without this button indicate the feature is unavailable, requiring manual opening. The remote operates within approximately 5 meters - beyond this range it won't respond. If the key fob battery drains after prolonged use, simply replace the coin cell. Avoid placing excessively heavy items in the trunk as this strains the lift supports and reduces lifespan. Regularly inspect the latch mechanism for smooth operation, applying WD-40 lubricant as needed to maintain proper function.

Was this review help?
11
3
Share
Expand All
LeCaden
01/17/2026, 11:16 PM

Last time I drove my friend's Qashqai, I found the remote trunk opening feature super convenient. Just hold the trunk button when the key is near the car, and it opens without inserting the key. He said this function has been a big help in supermarket parking lots. But note that not all Qashqais have it—it depends on the trim level, only higher trims with power tailgates support this. If the remote fails, first check for signal interference nearby, like from substations or large electronic devices. Be cautious with aftermarket modifications, as retrofitting can easily blow fuse circuits. There's also an interior trunk release switch located at the lower left corner of the driver's seat as backup. During maintenance, ask the technician to check the trunk motor's operating current to ensure stable remote system operation.

Was this review help?
9
0
Share
Expand All
More Forum Discussions

Which factory produces Lynk & Co?

Lynk & Co's production base is located at the Luqiao Factory in Taizhou. The Luqiao manufacturing facility was invested in by Zhejiang Geely Holding Group, constructed according to Volvo Cars' technology and standards, and is managed and operated by Volvo Cars. Lynk & Co offers models such as the 01, 02, and 03, each with different positioning: the Lynk & Co 01 is positioned as a compact SUV; the Lynk & Co 02 as a coupe SUV; and the Lynk & Co 03 as a compact sedan. The Lynk & Co 01 is the first model developed on the CMA (Compact Modular Architecture) platform, equipped with the Drive-E series 2.0TD turbocharged engine, boasting class-leading fuel economy and dynamic performance.
20
3
Share

What is the square wave button next to the AC?

The square wave button next to the AC is the defogging and heating function button. Here are the relevant introductions: Introduction 1: There are generally two defogging buttons in a car, one is the front windshield defogging button, usually marked with a fan shape and a wave line, and the other is the rear windshield defogging button, usually marked with a square and a wave line. Introduction 2: The front windshield defogging relies on the air conditioning system, with dedicated air vents located near the front windshield on the center console. The rear windshield defogging mainly uses electric heating wires. After turning on the rear windshield defogging switch, the heating wires will generate heat, thereby achieving the purpose of helping to defog.
6
2
Share

How to Press the Clutch Slowly and Steadily?

The method to press the clutch slowly and steadily is as follows: First, you need to master the correct posture for pressing the car clutch. Use your heel as a pivot and place the ball of your foot on the pedal. When pressing the clutch pedal, do it all the way down in one motion. When releasing the clutch pedal, the movement should be slow. While driving, there's no need to keep your left foot on the clutch pedal at all times; you can place it directly on the floor. This allows you to observe road conditions better and respond promptly in emergencies. During driving, pressing the clutch must be done quickly. After shifting gears appropriately, release the clutch slowly to avoid jerking. When downshifting, first reduce the speed by pressing the brake until the speed is within a certain range, then quickly press the clutch to change gears and slowly release the clutch.
7
4
Share

Is 4S Store After-Sales Service Nationwide Universal?

When purchasing a car from any authorized dealer nationwide, you will enjoy the warranty provided by the manufacturer and the three-guarantee policy offered by the state, with no explicit indication that claims cannot be made. Below is the relevant introduction: Car Warranty Period: This refers to the time period during which the car manufacturer promises to provide free repairs and maintenance for faults caused by quality issues when selling the product to consumers. Most car manufacturers now implement a new vehicle warranty period of two years or 60,000 kilometers, whichever comes first. During the warranty period: Not all vehicle repair costs are waived; it depends on the free items specified by the manufacturer during the warranty period. Usually, relevant written descriptions can be found in the owner's manual and the after-sales department of various car 4S stores. Therefore, please read the manual carefully to avoid spending unnecessary money during the warranty period.
7
4
Share

Can the Engine Automatically Shut Off After Leaving with One-Button Start?

One-button start vehicles cannot automatically shut off the engine after the owner leaves. Below are specific reasons why the one-button start fails to detect the key: Battery Depletion: For cars with batteries older than 2 years or those parked for extended periods, you can check for battery depletion using a multimeter. Generally, the voltage should be around 12V when not in use and above 10V during ignition to rule out battery issues. Poor Fuse Contact: Lightly tap the fuse box; if the engine starts, it indicates poor fuse contact. Starter Motor Failure: If the battery has power but no sound is heard from the starter motor when pressing the ignition button, it might be a starter motor failure, requiring replacement at a repair shop.
1
4
Share

How much pressure is required for the cylinder?

Cylinder working pressure is approximately 0.6 MPa, which equals 6 kilograms per square centimeter. If the cylinder pressure becomes unbalanced, it may cause engine knocking and power loss in the vehicle. In severe cases, it could even lead to complete engine failure. About cylinders: Cylinders are mainly divided into two categories - reciprocating linear type and reciprocating swing type. The reciprocating linear cylinders can be further classified into single-acting cylinders, double-acting cylinders, diaphragm cylinders, and double-impact cylinders. Conditions for cylinder pressure testing: 1. Ensure the vehicle battery has sufficient charge before testing, otherwise it may cause excessively low engine RPM leading to stalling in manual transmission vehicles; 2. Maintain the engine at normal operating temperature, as excessively high engine temperature will increase pressure within the engine cylinders.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.