Can the Wuling Zhiguang be retrofitted with air conditioning?

2 Answers
MacTaylor
07/24/25 6:25am
Wuling Zhiguang can be retrofitted with air conditioning. Here is the relevant information: 1. The difference between the two engines: The Wuling Zhiguang's engines are divided into 1.2-liter and 1.0-liter models. Their differences are: different displacement, different maximum torque, different fuel consumption, and different maximum horsepower. 2. The biggest highlight of the seats: The rear seat folding function has been changed—the 2007 Wuling Zhiguang improved the rear seat folding function (double-row middle folding), increasing cargo space and making the interior more spacious. Moreover, the foldable rear seats also provide better visibility for the driver to observe the rear.
Was this review help?
11
3
Share
MarleyAnn
08/11/25 2:12am
Of course, you can install an air conditioner! I've seen many friends add AC to their Wuling Zhiguang, mainly through either factory-installed or aftermarket options. There are a few things to note during installation: the AC compressor needs to be mounted on the engine accessories, and wiring must be properly connected to the electrical system and radiator. This job should be done by a professional to avoid issues. The cost is roughly a few thousand yuan, depending on the brand and component quality. After installation, driving in summer becomes much more comfortable, though it may slightly increase fuel consumption since the engine has to share power for the AC. Before installation, it's advisable to check the vehicle manual or consult a 4S shop to ensure system compatibility. Avoid cheap, low-quality parts to prevent issues like gas leaks or short circuits. Regular maintenance is also crucial—clean it annually and check refrigerant levels to extend its lifespan. Overall, adding an AC is quite practical, enhancing the driving experience, especially for those who frequently take long trips.
Was this review help?
6
5
Share
Expand All
More Forum Discussions

What does the Nissan Sunny B1068 fault code mean?

B1068 fault code indicates a short circuit in the supplemental airbag module. This issue is mainly related to the primary and secondary airbags. First, check if there are any abnormalities in the wiring connections. Location of the airbag module: The airbag module is generally located in front of the gear shift lever or underneath it. To access it, lie down on the seat, turn the key to the on position, remove the screws on the steering wheel, and take off the steering wheel to see the airbag module. Introduction to airbags: An airbag is a device that inflates to protect passengers before a secondary collision occurs during a crash. As an auxiliary device to the seat belt's occupant restraint system, the airbag is referred to as the airbag system.
5
1
Share

Where to Check the Fuel Consumption Display on Oshan X5?

The fuel consumption displayed on the instrument panel can be accessed using the buttons on the right side of the steering wheel. The displayed fuel consumption is the ratio of the total distance traveled to the total fuel consumed. The average fuel consumption shown on the instrument panel is an overall average, which also includes instantaneous fuel consumption. It is highly influenced by road conditions and driving speed, so it should be used as a reference only. This function can be operated using the multi-function steering wheel. By pressing the up and down buttons on the right side to navigate to the vehicle information, and then using the left and right buttons to switch to the average fuel consumption.
19
5
Share

Should You Shift Gear or Release Handbrake First When Starting an Automatic Transmission Car?

When starting an automatic transmission car, you should shift gear first and then release the handbrake. The safe starting procedure is as follows: press the foot brake, shift to D gear, release the handbrake, release the foot brake, and finally press the accelerator to start. For automatic transmission models equipped with an electronic handbrake, most vehicles will automatically release the handbrake when you close the door, fasten the seatbelt, and gently press the accelerator while the engine is idling. The gear positions for automatic transmission are: 1. P for Parking; 2. R for Reverse; 3. N for Neutral; 4. S for Sport; 5. D for Drive; 6. L for Low; 7. M for Manual mode.
7
1
Share

What Causes Unstable Idle Speed in a Motorcycle Engine?

Motorcycle engine idle speed instability can be attributed to the following reasons: 1. Inaccurate ignition timing, leading to poor idle performance; 2. Air leakage in the engine; 3. Incorrect spark plug electrode gap; 4. Clogged idle jet in the carburetor; 5. Use of incorrect gasoline octane rating; 6. Blocked air filter or muffler; 7. Poor-quality gasoline. Regular oil changes are crucial for motorcycles, as engine oil is often referred to as the 'lifeblood' of the engine. Without engine oil, the engine cannot operate properly. Engine oil serves multiple functions including lubrication, cleaning, sealing, buffering, and rust prevention within the engine.
12
4
Share

What is the 'Automobile Big Book' certificate?

Automobile Big Book refers to the vehicle registration certificate, which serves as the legal proof of vehicle ownership. It is kept by the vehicle owner and not carried with the vehicle. This document is required for any vehicle registration procedures such as transfers or changes of ownership, and records the vehicle's relevant information, functioning similarly to a vehicle's household registration booklet. The verification methods for the vehicle registration certificate are: 1. Check whether the owner's ID matches the document used when applying for the vehicle registration certificate; 2. Examine whether the 'usage nature' field indicates 'commercial' or 'non-commercial'; 3. Note that applying for the vehicle registration certificate can be done by an agent with the original ID of the client.
18
2
Share

Which button is the home return key on the Audi A4L?

There is a circular button behind the gear lever of the Audi, which serves as the home return button. Here are the functions of other buttons in the Audi: Electronic Stability Program (ESP): It is enabled by default and generally not recommended to be manually turned off by the driver. This system effectively prevents the vehicle from losing control during extreme driving conditions. Hazard Warning Lights (commonly known as double flash lights): Used in special situations such as vehicle breakdown or temporary parking, primarily to alert other vehicles. Volume adjustment buttons: In addition to the normal knob for adjusting volume, moving it left or right can also switch songs.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.