···
Log in / Register

Can the Wuling Rongguang be driven with the malfunction indicator light on?

4 Answers
Cameron
07/30/25 1:42am

It is not advisable to drive the Wuling Rongguang when the malfunction indicator light is on, as continuing to drive can easily exacerbate the vehicle's issues, potentially causing fatal damage to the vehicle. Taking the 2020 Wuling Rongguang as an example, it belongs to the microvan category with body dimensions of 4135mm in length, 1625mm in width, and 1870mm in height, a wheelbase of 2700mm, a fuel tank capacity of 45 liters, and a curb weight of 1206kg. The 2020 Wuling Rongguang features a MacPherson strut front suspension and a longitudinal leaf spring rear suspension. It is equipped with a 1.2L naturally aspirated engine, delivering a maximum horsepower of 76PS, a maximum power of 56kW, and a maximum torque of 112Nm, paired with a 5-speed manual transmission.

Was this review help?
16
4
Share
LeMartin
08/15/25 7:31am

It's best not to drive when the Wuling Rongguang's warning light comes on. With years of driving experience, I know that a lit warning light indicates a vehicle problem. Specifically, it could be an engine malfunction, abnormal emission system, or sensor failure. Continuing to drive may worsen the damage, such as engine overheating or brake system failure, increasing the risk of accidents. If it's a yellow warning light, you can carefully drive at low speed to a nearby repair shop for inspection; but if it's a red light, you must stop immediately and seek assistance. Regular maintenance is recommended for car owners, such as cleaning the OBD interface, to prevent similar issues, which saves money and ensures safety. Don't forget that the Wuling Rongguang is a practical vehicle, but proper maintenance is essential for long-term use.

Was this review help?
6
3
Share
Expand All
MaximusDella
10/21/25 2:01am

When the malfunction indicator light of the Wuling Rongguang comes on, I always remind myself not to ignore it. The illuminated light usually indicates a sensor error or system failure. Continuing to drive may cause faster engine wear or a sudden surge in fuel consumption. I would first find a place to pull over and check the dashboard for other warnings, such as overheating coolant or unstable oil pressure. If there are no major issues, I can use a mobile app to read the fault codes before deciding on the next steps. Pay attention to the vehicle's condition during daily driving to identify potential problems early. When visiting the repair shop, discuss the mechanic's recommendations instead of just focusing on quick fixes to get back on the road.

Was this review help?
16
4
Share
Expand All
SanAmelia
12/04/25 2:28am

Drive with caution when the warning light comes on in a Wuling Rongguang. I believe the illuminated light indicates a vehicle defect. Driving short distances may still be manageable, but if the light flashes or the car shakes, you must stop immediately. Possible causes include OBD system false alarms or aging wiring. If these issues are not repaired, they can escalate into bigger problems. Visit a professional repair shop as soon as possible for diagnosis. Wuling vehicles are known for their practicality, so don't let small oversights compromise safety.

Was this review help?
19
5
Share
Expand All
More Forum Discussions

What does 45tfsi mean?

45tfsi refers to: The number 45 does not represent displacement, but is a naming method derived from converting the G-value of 0-100 km/h acceleration, serving as a quantitative measure of the vehicle's acceleration; tfsi stands for turbocharging plus direct fuel injection. The G-value is used to represent the overall acceleration sensation of the vehicle model, with larger numbers indicating faster acceleration. The magnitude of the G-value is calculated by multiplying the average acceleration value (a) required for the vehicle to complete the 0-100 km/h acceleration by 10. tfsi refers to an FSI engine equipped with a turbocharger (T), a term commonly used in Audi series models. In the Volkswagen series, engines with direct injection (I), turbocharging (T), and mechanical (S) twin-charging are abbreviated as TSI, meaning fuel stratified injection, which is a type of lean-burn technology for engines.
8
4
Share

Should You Turn on AC When Using Car Heater in Winter?

You don't need to turn on AC when using car heater in winter. The AC button controls the car's air conditioning compressor, which is only required when cooling in summer. Pressing the AC button activates the compressor for cooling. The heater simply utilizes the car's internal heat circulation principle without needing the air conditioning compressor. To use the heater, you only need to adjust the temperature control and turn on the blower fan. Therefore, there's no need to activate the AC switch when using car heater in winter. The heating system uses engine-generated heat to warm the air - after the engine cooling system dissipates heat from the engine, a fan directs this heat into the cabin as warm air. Even if you don't use the heater, the heat generated by engine operation would still be expelled outside the vehicle through normal heat circulation.
3
0
Share

What Type of Engine Oil Should Be Used in Winter?

What type of engine oil should be used in winter depends on the lowest temperature in your region during winter. If the winter temperature in your area does not drop below -35 degrees Celsius, then 0W oil can be used. If it does not drop below -30 degrees Celsius, 5W oil can be used, and if it does not drop below -35 degrees Celsius, 10W oil is suitable. When selecting engine oil, it is essential to choose the appropriate viscosity for your car's engine based on its technical characteristics. The viscosity of the oil should not be too high or too low. If the viscosity is too low, the engine may not receive sufficient lubrication, which can increase wear and tear. If the viscosity is too high, it can increase the resistance the engine faces during operation, negatively affecting power output and fuel economy.
10
2
Share

What vehicles can a B2 license drive?

A B2 driver's license allows the holder to operate medium and heavy-duty trucks or specialized operation vehicles, and also permits driving small cars, small automatic transmission vehicles, low-speed trucks, three-wheeled vehicles, and wheeled self-propelled machinery. With a B2 license, one is allowed to drive blue-plate minibuses with 9 seats or fewer and a vehicle length under 6 meters. Among the medium and heavy-duty trucks permitted by a B2 license, there are no restrictions on tonnage or length, but the requirement is that the cargo compartment and the cargo hold must be on the same chassis. Some trucks where the cab can be detached from the trailer, known as tractors or commonly referred to as 'semi-trucks,' can only be driven with an A2 license.
10
4
Share

What does the 'a' next to the electronic handbrake mean?

The 'a' next to the electronic handbrake represents the auto start-stop function, whose English name is autohold. After turning on this switch, when the vehicle is braked to a stop during driving, even if the brake is released, the vehicle will not continue to move. It will only resume driving when the accelerator is pressed, and can only be turned off manually. This function is suitable for situations like going up and down slopes or frequent starts and stops. The automatic parking system is a technical application that can achieve an automatic handbrake during vehicle operation. This technology allows drivers to avoid prolonged braking when the vehicle is stopped, and prevents unnecessary sliding when the automatic electronic parking brake is engaged.
10
3
Share

What Components Make Up a Car's Power System?

An automobile's power system primarily consists of a battery, alternator, and voltage regulator. The alternator is responsible for charging the battery, keeping it sufficiently charged over time, while both the battery and alternator supply power to all the vehicle's electrical components. The battery is an essential part of the car and can be categorized into traditional lead-acid batteries and maintenance-free batteries. The car alternator serves as the main power source, functioning to supply electricity to all electrical devices and simultaneously charge the battery when the engine is running normally. Since the alternator is driven by the car's engine, and the engine's speed is not constant, the alternator's output voltage may fluctuate. Therefore, an electronic device is required to regulate the alternator, ensuring it outputs a relatively stable voltage across different engine speeds—this is the role of the voltage regulator.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.