···
Log in / Register

Can the Wuling Hongguang Mini be driven on highways?

4 Answers
Susan
07/29/25 4:05pm
Wuling Hongguang Mini can be driven on highways. The Wuling Hongguang Mini is a micro electric vehicle under the Wuling brand, with a wheelbase of 1940 mm, and its length, width, and height are 2917 mm, 1493 mm, and 1621 mm respectively. The Wuling Hongguang Mini is a three-door, four-seater electric vehicle. Additional Information: The Wuling Hongguang Mini's electric motor has a maximum power of 20 kW and a maximum torque of 85 Nm. This vehicle uses lithium-ion batteries, which are commonly used in most pure electric vehicles and plug-in hybrid vehicles. Lithium-ion batteries have lighter weight and higher energy density. The front suspension of the Wuling Hongguang Mini uses a MacPherson independent suspension, while the rear suspension uses a multi-link non-independent suspension.
Was this review help?
6
4
Share
GabriellaRose
08/15/25 4:22am
The Wuling Hongguang Mini can indeed go on the highway—I've driven it several times without any issues. It meets China's highway standards, with a top speed of 100 km/h, which isn't fast but gets the job done. From personal experience, the biggest headache is the range—a full charge only gives about 170 km, so long highway trips require planning charging stops in advance, though service areas usually have facilities. Also, small cars are more affected by wind on the highway, feeling a bit light and unstable at high speeds, making aggressive driving unsafe. I recommend maintaining a speed of 80-90 km/h for a steady and comfortable ride. The advantage is cheap charging, saving a lot compared to gas cars, making it great for short trips or outings. Overall, it's fine—just use it wisely.
Was this review help?
11
4
Share
Expand All
JosephDella
10/12/25 5:42am
Safety is a key consideration when driving the Wuling Hongguang Mini on highways—it's absolutely doable, but caution is essential. I've taken it on long trips, and its compact size means higher wind resistance; a strong gust can easily make it sway, with noticeable instability in steering. Additionally, electric vehicle power drops significantly at high speeds, and range depletes even faster, so charging becomes a concern after just half an hour. Regular checks on tire pressure and the braking system are also crucial to avoid accidents. From a driving perspective, I recommend avoiding rainy or snowy conditions and opting for short stretches of highway in good weather. The upside is its low maintenance cost, making it an economical choice for daily highway commutes. In short, it’s highway-capable, but steady and cautious driving is the golden rule.
Was this review help?
17
4
Share
Expand All
AubreeAnn
11/25/25 6:45am
The Wuling Hongguang Mini is compact and convenient, making it very easy to drive on highways. I've been using it for commuting for years and often take it on highways—it's not troublesome at all. Although its speed isn't high, it's more than enough for trips within 100 kilometers, and charging at service areas is quick and easy. It's incredibly cost-effective for daily use, with charging costs just a few yuan per session, something gasoline cars can't match. The downsides are that it struggles a bit when overtaking, and its small size means poor sound insulation, making long trips a bit noisy. I think it offers great value for money and is perfectly capable for short highway trips without any hassle.
Was this review help?
16
2
Share
Expand All
More Forum Discussions

What engine does the SWM X3 use?

SWM X3 is equipped with a 1.6L naturally aspirated engine and a 1.5T turbocharged engine. The functions of the engine are: 1. Fully burning the fuel injected into the cylinder to generate power; 2. Determining the vehicle's power performance, fuel economy, stability, and environmental friendliness. The 2020 Value Edition SWM X3 features a MacPherson independent front suspension and a five-link coil spring rear suspension. It is powered by a 1.5L naturally aspirated engine with a maximum horsepower of 112 PS, a maximum power of 82 kW, and a maximum torque of 152 Nm, paired with a 5-speed manual transmission.
2
2
Share

What to Do When ETC Signal is Weak?

The solutions for weak ETC signal are: 1. Reserve a cutout for ETC when installing metal film; 2. Replace with a new ETC device; 3. Change the installation position of the ETC. The installation method of the ETC device is: 1. Purchase the ETC device, check if the equipment is complete, and read the installation manual; 2. Determine the installation direction of the ETC device, with the solar panel facing outward; 3. Peel off the back adhesive of the device, fold the solar panel towards the vehicle's front windshield, and press firmly to ensure secure attachment; 4. Install the device at the center top of the vehicle's front windshield, ensuring it does not obstruct normal driving visibility. It should be adhered in one go and not removed for reattachment; 5. Insert the ETC card to activate the ETC device. Upon hearing a beep from the device and seeing the indicator light turn on, the device is activated, and the installation is complete.
9
4
Share

What are the drawbacks of ECU remapping for engines?

The drawbacks of ECU remapping for engines are: 1. It requires the use of higher-quality fuel, which increases driving costs; 2. If the ECU upgrade is not done properly, it can affect the engine's lifespan, cause the engine warning light to illuminate, and result in unbalanced power output; 3. Some vehicle models may experience excessive power after the upgrade, making the braking system inadequate, potentially leading to longer braking distances and safety concerns; 4. It may void the warranty. The function of an engine is: to convert the thermal energy of gasoline or diesel into mechanical energy by burning it in a sealed cylinder, causing the gas to expand and push the piston to perform work. The components of an engine include: 1. Valve train; 2. Crankshaft and connecting rod mechanism; 3. Ignition system; 4. Cooling system; 5. Lubrication system; 6. Starting system; 7. Fuel supply system.
3
3
Share

Should the engine be warmed up before an oil change?

It is necessary to warm up the engine before changing the oil. The method for warming up is: After starting the vehicle, let it idle for 1 to 2 minutes to allow the engine coolant to reach normal temperature. The steps for changing the oil are: 1. Lift the vehicle, remove the undercover, and place a container beneath the oil drain plug; 2. Unscrew the drain plug, use an air gun to blow into the oil filler port for two minutes, then tighten the drain plug after the oil has drained and wipe it with a tissue to check for leaks; 3. Reinstall the undercover, lower the vehicle, and add new oil through the filler port. Precautions for changing the oil include: 1. Perform the oil change while the engine is warm to ensure the old oil is drained as completely as possible; 2. Add the appropriate amount of new oil; 3. After adding the oil, start the engine and check all components for leaks. Let the engine run for 3 minutes to confirm the oil level is at the normal mark.
2
2
Share

Is Skoda a Joint Venture or Domestic Car?

Skoda is a joint venture car. Its body dimensions are: length 4675mm, width 1814mm, height 1460mm, with a wheelbase of 2686mm, fuel tank capacity of 68.5 liters, trunk capacity of 570 liters, and a body weight of 1440kg. The 2019 standard version of Skoda features a MacPherson independent front suspension and a four-link independent rear suspension. It is equipped with a 1.4L turbocharged engine, delivering a maximum horsepower of 150PS, maximum power of 110kW, and maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
5
5
Share

What is the disassembly and installation method for the ŠKODA Superb navigation system?

The disassembly and installation method for the ŠKODA Superb navigation system is as follows: 1. Remove the button panel and air vents on the center console; 2. After removing the panel, unplug the connecting wires, loosen the relevant screws, take out the single-disc CD player, and disconnect the connecting wires to complete the disassembly; 3. Use screws and clips to install the new navigation device in the original center console panel position, remove the packaging from the navigation screen, and eliminate any bubbles on the screen film before completing the installation. The navigation modes include: 1. Path retrieval customization mode; 2. Site setting mode; 3. Map positioning mode. The functions of the navigation system are: 1. Search and processing of map data; 2. Map matching; 3. Route planning; 4. Human-machine interface; 5. Wireless communication.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.