Can the whole vehicle warranty be repaired at any 4S store?

1 Answers
RoseFitz
07/29/25 11:56pm
The whole vehicle warranty can be repaired at any 4S store. However, it must be repaired at a 4S store of the same brand, and 4S stores of different brands cannot provide repairs. For vehicles within the warranty period, repairs are free at any 4S store, but damage caused by human faults is not free and requires payment by the owner. All 4S stores nationwide can provide 24-hour free rescue services. 4S store car repair process The service hall receives customers who come to the company for repairs. Accept the business. Clean the received vehicle and send it to the workshop, completing the handover procedures. During the repair period, consult and handle additional repair items: consult customer opinions and exchange work opinions with the workshop. Take the completed vehicle out of the workshop: check the vehicle's exterior technical condition and relevant onboard items. Notify the customer to pick up the vehicle and prepare the necessary documents. The service hall receives customers who come to pick up their vehicles, guides them to inspect the completed vehicle, reports the situation, and completes the settlement procedures.
Was this review help?
11
3
Share
More Forum Discussions

How many liters of fuel can the MG GS actually hold?

2019 MG GS comes with 7 models, all with a fuel tank capacity of 55 liters. The vehicle is equipped with either a 1.5-liter turbocharged or a 2.0-liter turbocharged engine. Transmission options include a 6-speed manual transmission, a 6-speed wet dual-clutch transmission, and a 7-speed dry dual-clutch transmission. The vehicle adopts front-wheel drive or front four-wheel drive. In the same class, the 2020 Han Teng X7 has a fuel tank capacity of 60 liters, the 2022 Si Hao QX has a fuel tank capacity of 55 liters, and the 2019 MG HS has a fuel tank capacity of 55 liters. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity marked by the manufacturer is measured from the bottom of the tank to the safety limit. There is additional space from the safety limit to the tank opening, which is reserved to allow for fuel expansion when temperatures rise, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, marked with E and F. When the needle is close to E, it indicates low fuel, while nearing F means the tank is nearly full.
14
2
Share

Why does the high beam malfunction indicator light up in the Volkswagen Sagitar?

Vehicle malfunction indicator lights are mostly caused by issues in the fuel emission system. Troubleshooting methods: Potential faults may occur in the fuel supply system, ignition system, intake system, exhaust system, and various sensor components. Issues such as intake system leaks or blockages, excessive carbon buildup in the throttle, substandard fuel selection, or stuck valves can also trigger the malfunction indicator. The elimination method can be used to check each component one by one. If the engine light comes on while driving, it is necessary to visit a repair shop to check the fault codes. Impact of the malfunction indicator: The illumination of the malfunction indicator suggests there may be a fault within the electronic throttle system, which could affect the normal operation of the vehicle.
10
1
Share

What are the causes of the transmission oil pump failure in the Audi Q5?

The main cause of transmission oil pump failure is the presence of a large amount of metal shavings and impurities in the transmission fluid. Reasons why metal shavings damage the oil pump: Over time, the transmission filter accumulates iron filings and impurities from mechanical wear inside the transmission. If the transmission fluid is not replaced regularly, the filter reaches its absorption limit and can no longer trap additional impurities. As a result, the transmission fluid becomes contaminated with a significant amount of metal shavings and impurities. When this contaminated fluid enters the oil pump, it causes internal wear, leading to oil pump failure. Hazards of oil pump damage: In the early stages of oil pump damage, symptoms may include poor acceleration, jerking, or hesitation when accelerating. Over time, intermittent issues such as failure to engage gears may occur, especially when the car is warm. Eventually, the vehicle may not move even when gears are engaged. Vibration at 100 mph can also indicate an oil pump issue. In severe cases of oil pump damage, the only solution is to replace the oil pump.
8
1
Share

What does the Audi badge 45TFSI mean?

Audi badges like 35/40/45TFSI represent a quantitative value of the car's acceleration. This value is calculated using a specific formula. The formula is: G=100000m/3600s/t (0-100km/h acceleration time)*10. Substituting G=45 into the formula gives 45=100000m/3600s/t*10, where t=6.2 seconds. Therefore, 45TFSI also indicates that the car's 0-100km/h acceleration time is 6.2 seconds. Similarly, 40TFSI represents a 0-100km/h acceleration time of 7 seconds, and 35TFSI represents an 8-second acceleration time. 45TFSI generally represents a 3.0TFSI engine, with a maximum power output of 213kw/4850-6800rpm and a maximum torque of 420Nm/2500-4850rpm. Additionally, 35TFSI typically represents a 1.4T engine, while 40TFSI usually denotes a 2.0T low-power engine.
12
3
Share

Where is the VIN number on the Haval H8?

The VIN number of the Haval H8 is located under the front passenger seat. You can find it by carefully observing the area beneath the passenger seat. Uses of the VIN number: Identifying vehicle information, which helps distinguish the vehicle in certain special circumstances; checking for traffic violations; and verifying the vehicle's production batch, such as determining if the vehicle is subject to a recall. Selecting the correct parts: When performing car maintenance, modifications, or ordering spare parts, you need to use the VIN number to look up the original manufacturer's part numbers, dimensions, and other relevant information. This ensures you purchase the correct parts, upgrade kits, or modification packages.
10
2
Share

Where is the air conditioning drain outlet of the Passat?

Volkswagen Passat's air conditioning drain pipe is located in the engine compartment of the vehicle, on the wall in front of the passenger side. It can be seen by looking down from the rear of the engine. The function of the air conditioning drain pipe: It is used to discharge the condensed water generated during the operation of the air conditioner. When the air conditioner is cooling, a large amount of water droplets, called condensed water, are produced during the heat exchange of the indoor evaporator. A drain pipe is connected to discharge the indoor condensed water to the outside. Automobile air conditioning system: The automobile air conditioning system is a device that cools, heats, ventilates, and purifies the air inside the compartment. It can provide a comfortable riding environment for passengers, reduce the driver's fatigue, and improve driving safety.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.