Can the White Panamera chassis be raised or lowered?

2 Answers
SanEvangeline
08/26/25 3:38am
White Panamera chassis can be raised or lowered, but it is important to note that this feature is only available if the chassis lifting function has been selected as an option. Without this option, the chassis cannot be adjusted. Taking the 2021 Panamera as an example, it belongs to the large car category with the following dimensions: length 5049mm, width 1937mm, height 1423mm, wheelbase 2950mm, fuel tank capacity 90l, trunk capacity 495l, and a curb weight of 1870kg. The 2021 Panamera features a double-wishbone independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.9t twin-turbocharged engine, delivering a maximum horsepower of 330ps, maximum power of 243kw, and maximum torque of 450nm, paired with an 8-speed dual-clutch transmission.
Was this review help?
4
5
Share
GraceRose
09/08/25 4:20am
When I first drove this car, I noticed that the white Panamera indeed has an adjustable chassis height. The built-in air suspension system allows for automatic or manual height adjustments in different modes. For example, lowering the chassis when entering or exiting underground parking garages to avoid scraping the bottom, or raising it for better off-road clearance. The driving experience is more stable, with excellent filtering on curves and bumpy roads. I find this feature practical for both daily commutes and weekend road trips, and it also helps protect suspension components over time. Porsche's design is very comprehensive, focusing on solving real problems rather than flashy features. I recommend that owners experiment with different height settings to find the driving feel that suits them best.
Was this review help?
2
0
Share
Expand All
More Forum Discussions

Is the Combination Switch Faulty if Both Headlights and Taillights Are Not Working?

If both the headlights and taillights are not working, it is not due to a faulty combination switch but rather a typical issue with the lighting harness. Introduction to Combination Switch: The combination switch, also known as a changeover switch, is commonly used in electrical control circuits as a power-introducing switch. It can be used to directly start or stop small-power motors or to control motor forward/reverse rotation and direction changes. It is also frequently used to control local lighting circuits. Combination switches come in single-pole, double-pole, triple-pole, and quadruple-pole configurations, with rated continuous currents ranging from 10A, 25A, 60A, to 100A. Function of the Combination Switch: The combination switch is a multifunctional modular switch used to control lighting and signal devices, as well as some other accessories. It is typically a handle-style switch installed on the steering column below the steering wheel for easy operation by the driver.
12
1
Share

Must a motorcycle be scrapped after 13 years?

Motorcycles must be scrapped after 13 years. Vehicle scrapping process: The owner of a vehicle applying for scrapping and renewal must fill out the "Application Form for Vehicle Modification, Transfer, Alteration, Suspension, or Scrapping" in duplicate and affix the owner's seal. Apply at the registration and acceptance counter, where a "Vehicle Scrapping Notice" will be issued for vehicles that have reached the scrapping age limit. For vehicles that have not reached the scrapping age limit, the vehicle inspection counter will assess and issue a "Vehicle Scrapping Notice" if the vehicle meets the scrapping standards. The owner can choose a qualified recycling company to dismantle the vehicle with the "Notice". The recycling company will dismantle the vehicle and take photos after verifying the "Notice". The engine must be separated from the vehicle, the engine block must be broken, and the frame (chassis) must be cut. The owner must submit the "Modification Form", "XX Province Vehicle Renewal Technical Assessment Form", "Scrapped Vehicle Recycling Certificate", and photos of the dismantled vehicle to the vehicle inspection counter for verification and signature. The license plates and certificates will be reclaimed, and the case will be submitted for approval according to regulations to complete the scrapping registration.
3
2
Share

How Many Points Are Required for Annual Vehicle Inspection?

Annual vehicle inspection requires 12 points on the driver's license. Types of Driver's Licenses and Permitted Vehicle Categories: C1 license permits driving small and micro passenger vehicles, light and micro cargo vehicles, and light, small, and micro special-purpose vehicles. C2 license permits driving small automatic transmission vehicles, including small and micro automatic transmission passenger vehicles and light and micro automatic transmission cargo vehicles. C3 license permits driving low-speed cargo vehicles (formerly four-wheel agricultural transport vehicles). C4 license permits driving three-wheeled vehicles (formerly three-wheel agricultural transport vehicles). B2 license permits driving large trucks, heavy and medium cargo vehicles, and large, heavy, and medium special-purpose vehicles. Validity Period of Driver's License: The driver's license is valid for six years. After the six-year validity period expires, it will be replaced with a ten-year validity license. Eligible drivers may receive a long-term valid license. The driver must apply for a license renewal at the vehicle management office where the license was issued or another office 90 days before the expiration date.
9
0
Share

Why Should a New Car's Engine Be Washed?

Washing a new car's engine is aimed at protecting the engine's safety. Regular engine cleaning not only prevents the blockage of lubrication channels but also helps to some extent in removing carbon deposits from piston rings and ring grooves, thereby maintaining the engine and extending its service life. Engine cleaning method: Prepare a paintbrush, spray bottle, engine compartment surface cleaner, two cloths, and a high-pressure air can. First, remove surface dust with the high-pressure air can, then spray the engine compartment surface cleaner, being careful not to spray it inside the battery or fuse box. Wait for about ten minutes before wiping it dry. For wiring connectors, avoid using the engine compartment surface cleaner; instead, clean them with a damp cloth. For stubborn oil stains and crevices, use the spray bottle and paintbrush for careful cleaning, ensuring to control the water amount, spray method, and avoid sensitive areas. Finally, dry any remaining water in the engine compartment with a cloth or by idling the engine to evaporate the moisture. Benefits of engine cleaning: The engine's interior is lined with oil channels, which over time can accumulate sludge and other contaminants. Engine cleaning helps to remove these sludge impurities from the oil channels, ensuring the proper functioning of the engine's lubrication system. By cleaning away sludge and carbon deposits that affect the engine's normal operation, the engine's performance can be improved, and its lifespan extended.
20
2
Share

Can a Differential Lock Be Installed Afterwards?

A rear axle differential lock can be installed aftermarket, but the following three points should be noted: Rear Axle Housing Requires Drilling: Be mentally prepared—aside from fully automatic limited-slip differentials or differential locks, others require drilling holes in the original rear axle housing to connect control wires or tubes to the exterior. Even for Factory Models: They will have this additional hole. If you can't accept this fact, it's better not to opt for installing a lock. Gap Adjustment: Most differential locks replace the original open planetary gear set with a new housing. After the new housing is fixed to the ring gear, the spacing between the ring gear and the pinion gear may change.
14
2
Share

Do Motorcycle Shock Absorbers Need Lubrication?

Motorcycle shock absorbers do not require lubrication as they come with their own built-in lubrication and do not need additional lubrication. Working Principle of Shock Absorbers: The working principle is that when there is relative movement between the frame (or body) and the axle due to vibration, the piston inside the shock absorber moves up and down, causing the oil in the shock absorber chamber to repeatedly flow from one chamber to another through different pores. At this time, the friction between the pore walls and the oil, as well as the internal friction between oil molecules, creates a damping force that converts the vehicle's vibration energy into heat energy of the oil, which is then absorbed and dissipated into the atmosphere by the shock absorber. Maintenance Methods for Shock Absorbers: After driving the vehicle on a rough road for 10km, stop and touch the shock absorber housing with your hand. If it is not hot enough, it indicates that there is no resistance inside the shock absorber, meaning the shock absorber is not working. In this case, you can add an appropriate amount of lubricating oil and test again. If the housing becomes hot, it means the shock absorber is low on oil and should be filled up. Otherwise, it indicates that the shock absorber has failed.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.