Can the Velite 6 Hybrid Run Without Charging?

How to Check the Quality of a Used Car?

Here is a relevant introduction on how to check the quality of a used car: 1. Check the documents: This is a very important point. If the documents are incomplete, no matter how good the car is, it should not be considered. Incomplete documents may indicate that the car is stolen or illegal (a black-market vehicle). Therefore, the first step is to confirm whether the documents are complete. Then, compare the engine number on the car body to see if it matches. If it doesn’t match, the car should definitely not be considered. 2. Inspect the exterior: This includes the sheet metal, paint, and body frame. The first impression of the exterior is crucial. Check for scratches on the paint and any hard-to-notice dents. Pay special attention to whether the body frame has any dents or misalignment, as this could indicate a major accident. The extent of wear on the frame can help determine if the car has been involved in a serious collision. 3. Examine the car’s hardware: This includes the engine and chassis. Look for signs of oil leakage under the chassis. Check the wiring harness in the engine compartment for corrosion or aging. Inspect the engine block and mechanical parts for any signs of rust or mold. You can also start the car and listen to the engine sound for any unusual or harsh noises. 4. Interior inspection: The cleanliness of the carpet under the seats can help assess the car’s usage. Since most car owners cover their seats with leather or seat covers, judging by the seats alone may not be very accurate.

18

2

Share

Where is the VIN located on a sedan?

Automobile VIN can be found on the driver's side of the front windshield and the vehicle registration certificate. Below is relevant information about VIN locations: 1. New vehicle registration certificates usually print the VIN code in the "VIN" column, on various nameplates in the engine compartment, on the driver's side door pillar, etc. Under normal circumstances, the VIN cannot be altered. 2. Locations of the VIN plate for motor vehicles: Except for trailers and motorcycles, the plate should be fixed on the door hinge pillar, door lock pillar, or one of the door edge pillars connected to the door lock pillar, near the driver's seat; if such locations are not available, it should be fixed on the left side of the dashboard. If that is also not possible, it should be fixed on the inner side of the door near the driver's seat. Below is an introduction to the VIN: 1. The Vehicle Identification Number, abbreviated as VIN, is a unique set of seventeen alphanumeric characters used on automobiles to identify the manufacturer, engine, chassis number, and other specifications. To avoid confusion with the numbers 1 and 0, the letters "I", "O", and "Q" are not used. 2. In the United States and many other countries and regions, the Vehicle Identification Number (VIN) serves as the unique serial number for automobiles. These numbers are like fingerprints for cars, not only helping to record issues and changes of ownership but also aiding in theft prevention.

6

3

Share

What are the manifestations of a damaged car dryer?

Here is the relevant introduction to the manifestations of a damaged car dryer: 1. When the compressed air from the air compressor enters the dryer and leaks out through the throttle valve chamber, it indicates that the piston or O-ring seal in the dryer's throttle valve is damaged, dislodged, or scratched. Immediate inspection, cleaning, or replacement is required. 2. When the compressed pressure reaches the specified standard value, the dryer's exhaust valve D cannot stop exhausting under normal working conditions, indicating that the piston is stuck due to foreign objects, scratches, or jamming and fails to return. The small piston and O-ring seal should be promptly removed for inspection or replacement. 3. The air compressor is in good condition, and the dryer's intake is normal, but the outward output is extremely poor. There are two possible causes: first, the desiccant contains excessive moisture, oil, or impurities, thus blocking the air passages; second, the one-way valve for the dryer's outlet is stuck, indicating that the dryer has not been maintained for a long time. The dryer assembly should be removed for a complete system maintenance.

15

2

Share

What Season is 5W30 Engine Oil Suitable For?

5W30 is a multi-season engine oil suitable for use in most regions of China. The smaller the number before the "W," the lower the low-temperature viscosity, the better the low-temperature fluidity, and the lower the minimum applicable temperature, providing better engine protection during cold starts. The larger the number after the "W," the higher the high-temperature viscosity of the engine oil, the thicker the oil film, and the better the sealing and protection capabilities. Below are some relevant details about engine oil: 1. Different viscosities of engine oil result in varying sealing and anti-wear effects. 2. Using an inappropriate engine oil viscosity can accelerate engine wear, reduce cylinder sealing, affect combustion efficiency, and lead to carbon deposits. 3. There is no "best" engine oil, only the most suitable one. It is recommended to choose the appropriate engine oil based on the vehicle model and the temperature of the operating environment.

15

5

Share

Where to Turn On the Position Lights?

The control switch for the position lights is the light knob. For models with only manual light functions, turning the light knob one notch will activate the position lights, and turning it another notch will turn on the headlights. For models equipped with automatic headlights, turning the switch to the AUTO position will cause the position lights to automatically illuminate when the ambient light is dim. Below is some relevant information about position lights: 1. Position lights are a type of warning light used primarily in low-visibility conditions to alert other vehicles. 2. When the headlights are turned on, the position lights will also be activated. 3. In hazy weather, during evening driving, or in light rain, you can turn on the position lights alone without needing to activate the low beams (since low beams are ineffective during the day), making it easier for vehicles ahead and behind to identify your car.

15

5

Share

Is it normal for coolant to decrease?

Coolant reduction is a normal phenomenon, including fluids like engine oil and windshield washer fluid, which will decrease with vehicle usage, evaporation, and consumption. The primary reason for coolant reduction is natural evaporation. Coolant serves a cooling function for the car engine, which often operates at high temperatures. Since the coolant is in contact with the engine, some consumption is normal. How to choose coolant: The basic indicators of coolant are its freezing point and boiling point. On the market, coolants are available with freezing points of -15℃, -25℃, -30℃, -40℃, etc. Generally, it is advisable to choose a coolant with a freezing point at least 10℃ lower than the lowest temperature in your region. How to determine if coolant is insufficient: Observe the coolant warning light on the dashboard. If it lights up, it is likely due to insufficient coolant, though it could also be caused by excessively high cylinder temperatures. Check the coolant reservoir. If the fluid level is below the minimum mark (MIN), do not continue driving and promptly add coolant. Check the water level markings on the coolant tank. The normal coolant level should be between the maximum and minimum marks. To determine if coolant is insufficient, observe the markings. If the coolant level is below the minimum mark, it indicates a shortage of coolant.

4

5

Share

Can the Velite 6 Hybrid Run Without Charging?

How to Check the Quality of a Used Car?

Where is the VIN located on a sedan?

What are the manifestations of a damaged car dryer?

What Season is 5W30 Engine Oil Suitable For?

Where to Turn On the Position Lights?

Is it normal for coolant to decrease?

How many photos are required for driving school?

Under what circumstances is it not allowed to make a U-turn on the road?

What to Do When Car Glass Turns White Like Fog?

Why does the car feel heavier to drive than before?