Can the vehicle registration and license plate be processed within one day for a new car?

2 Answers
Tammy
07/29/25 5:06am
After purchasing a new car, safety technical inspection and complete documentation are required on the same day before the license plate can be issued. Below are the relevant details: 1. According to the "Regulations on the Registration of Motor Vehicles": Article 6 states that the owner of a motor vehicle must have the vehicle undergo safety technical inspection at a qualified inspection institution and obtain a safety technical inspection certificate before applying for registration. However, this does not apply to motor vehicles imported through customs and those exempted from safety technical inspection as recognized by the competent department of motor vehicle products under the State Council. 2. The "Specifications for Motor Vehicle Registration Work" stipulates: Article 2, vehicle management offices of traffic management departments at all levels of public security authorities shall process motor vehicle registration according to the procedures specified in these specifications, set up service positions in accordance with the "Specifications for Service Positions in Vehicle Management Offices," and improve service measures, enhance efficiency, and publicize procedures in line with the "Civilized Service Specifications for Vehicle Management Offices" and the "Regulations on the Disclosure of Motor Vehicle Registration Items."
Was this review help?
12
0
Share
MaciLynn
08/12/25 8:44am
Actually, it's quite challenging to complete all the procedures for a new car and get the official license plates in just one day. When I bought my car, I also wanted to get it done quickly, but I found that the DMV processing takes time. For example, the license plate registration involves vehicle inspection, number selection, and plate production, and just queuing and document review can take most of the day. In most places, if you go early in the morning and have all the required documents ready (invoice, ID card, compulsory traffic insurance, etc.), you might be able to get a temporary license plate the same day, but this is only a temporary solution with a short validity period. Official license plates require production time and usually take 1-3 working days, making it difficult to complete everything in one day even with rush processing. I recommend scheduling an appointment with the DMV or choosing a weekday to avoid peak times. Additionally, DMV system failures or large crowds can cause delays. If you're in a hurry to drive, it's safer to get a temporary plate first and then handle the official one later. Don’t set your hopes too high on finishing everything in one day to avoid disappointment.
Was this review help?
8
5
Share
Expand All
More Forum Discussions

What type of vehicle is the Mitsubishi Lancer?

Mitsubishi Lancer is a compact sedan. The high-performance version of the Mitsubishi Lancer is the Evo. The Mitsubishi Lancer Evo is a compact sports sedan, equipped with a 2.0-liter turbocharged engine across the entire lineup, delivering a maximum power of 280 horsepower and a maximum torque of 355 Nm. The engine reaches its peak power at 6,500 rpm and its peak torque at 3,500 rpm. The Mitsubishi Lancer Evo features a MacPherson independent front suspension and a multi-link independent rear suspension, coupled with an all-wheel-drive system to enhance handling and driving stability.
9
2
Share

What is the Idle State of a Car?

The idle state of a car refers to a working condition of the engine where, when the engine is running, the accelerator pedal is completely released, causing the engine to enter the idle state. Car idle is not a speed; the engine speed during idle is called the idle speed, which can be adjusted by modifying the throttle opening. Generally, the idle speed of a passenger car is around 800 revolutions per minute (RPM). Idling consumes a significant amount of fuel—the lower the idle speed, the less fuel is consumed. However, increasing the idle speed can help reduce CO and HC emissions. During engine idling, fuel combustion is incomplete, which can lead to carbon buildup in the throttle body, negatively affecting fuel economy and even the engine's lifespan.
1
5
Share

What Does It Mean to Abolish Provincial Expressway Toll Stations?

Abolishing provincial expressway toll stations refers to the elimination of toll booths at provincial borders under the previous management system where tolls were collected based on provincial boundaries. After implementing this policy, interprovincial toll stations will be removed. This measure aims to enhance vehicle traffic efficiency and reduce waiting times. It's important to note that abolishing interprovincial toll stations doesn't mean toll-free travel; rather, it eliminates the processes of payment and card collection. Toll stations are major congestion points, especially those located on main highways between provinces, which significantly impair the capacity and efficiency of the expressway network, hindering smooth and efficient travel for drivers.
6
1
Share

What is the minimum ground clearance of the Haval H9?

The minimum ground clearance of the Haval H9 is 206mm. When the vehicle is fully loaded, the distance between the most protruding part of the chassis and the horizontal ground is called the minimum ground clearance of the vehicle. The minimum ground clearance determines the vehicle's passing ability. The following is an introduction to the Haval H9: 1. The Haval H9 not only has a high minimum ground clearance. Its approach angle is 28 degrees, departure angle is 23 degrees, and maximum wading depth reaches 700mm. 2. The Haval H9 can be equipped with three differential locks; the body structure is a non-load-bearing body; the rear suspension is a solid axle non-independent suspension; the driving method is all-time four-wheel drive, and it is BorgWarner's dual-speed TOD all-time four-wheel drive system. The off-road capability of the Haval H9 is very strong. 3. The Haval H9 is positioned as a mid-to-large SUV, with seat layouts available in 5-seater and 7-seater versions.
2
0
Share

How to Set Sport Mode in Mercedes-Benz Cars?

There is a sport mode toggle button on the center console. Simply flick the button while driving, and the Mercedes-Benz will automatically enter sport mode. Below is an introduction to sport mode: 1. The working principle of sport mode in Mercedes-Benz is the same as that in other models, only the operation method differs. 2. After activating sport mode, the car's gear will instantly drop, the engine's RPM will instantly increase, and the car's power will also be enhanced immediately. 3. During driving, you can freely switch between sport mode and eco mode without any impact on driving, though fuel consumption will increase. 4. Mercedes-Benz cars feature a digital instrument cluster displaying P, R, N, D icons, with the E icon shown on the far right. 5. When switching driving modes, the icons on the instrument panel will change automatically, allowing the driver to monitor the current driving mode. It is recommended that owners use eco mode under normal driving conditions.
7
0
Share

What Causes Scratches on the Car Hood?

Scratches on the car hood can occur due to the following reasons: 1. Scratches on the hood may be caused by debris such as stones hitting the surface at high speeds, or by branches brushing against it. 2. The car's paint surface can develop numerous scratches, most of which are typically on the clear coat layer. These scratches can also easily occur during car washing. Here is a brief introduction to the layers of car paint: 1. The car's paint surface consists of four layers, from the inside out: the electrocoat layer, the primer layer, the base coat (color layer), and the clear coat. 2. After the car body is assembled, it is immersed in an electrocoating bath to form the electrocoat layer on the surface.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.