Can the Vehicle Management Office Conduct Annual Vehicle Inspections?

2 Answers
JuniperAnn
09/07/25 3:17am
The Vehicle Management Office can conduct annual vehicle inspections. However, vehicle inspections require visits not only to the Vehicle Management Office but also to the testing station. The Vehicle Management Office primarily handles applications for motor vehicle driver's licenses, replacements, renewals, inspections, and other services related to motor vehicles and drivers. On the other hand, the testing station mainly conducts comprehensive performance tests on motor vehicles. While the two are related, their functions are distinctly different. Before the annual inspection, ensure all traffic violations are settled and fines are paid. If the vehicle is being inspected in a different location, you must obtain an out-of-area inspection authorization from the vehicle's registration location in advance, specifying the Vehicle Management Office where the inspection will take place. Bring the vehicle registration certificate, a copy of the compulsory traffic insurance policy, and the owner's ID card. To increase the likelihood of passing the inspection, it is advisable to perform a preliminary check on your vehicle's lighting and braking systems before the official test. Verify that the left and right high and low beams and brake lights are functioning properly, and check for any aging of the lamp covers. Additionally, inspect the braking system for normal operation and ensure there is no deviation in braking between the left and right wheels. If any abnormalities are found, address them with repairs beforehand to avoid delays.
Was this review help?
11
4
Share
StCody
09/19/25 2:45am
I've been driving for almost ten years and always know where to go for the annual inspection: the vehicle management office mainly handles license plates, driver's licenses, or transfers—they don't conduct actual vehicle inspections. For the annual inspection, you need to find a dedicated motor vehicle inspection station or an authorized agency. Like last year, I almost went to the wrong place, but luckily a neighbor reminded me to book an appointment at the inspection station. They checked items like lights, brakes, and tires, took about two hours, and cost over 300 yuan. After completion, the inspection station issues a report, while the vehicle management office only reviews, stamps, and affixes the label. So to get the annual inspection done efficiently, just search for nearby inspection points—don’t waste time. A reminder: bring your vehicle registration and insurance documents in advance to avoid long queues disrupting your travel plans.
Was this review help?
8
1
Share
Expand All
More Forum Discussions

Can a motorcycle with modified LED lights pass the annual inspection?

The following details whether a motorcycle with modified LED lights can pass the annual inspection: Cannot pass: If a motorcycle is modified with xenon lights without installing lenses, it will not pass the annual inspection. Vehicles with xenon lights cannot pass the annual inspection because they lack lenses and directly connect xenon or LED bulbs. Additionally, bulbs with a color temperature exceeding 6000K also fail the inspection. Can pass: Installing xenon headlights is not considered vehicle modification, but the xenon headlights must comply with the technical requirements for vehicle lights specified in the "Safety Technical Conditions for Motor Vehicle Operation." During the annual inspection, if the xenon headlights cause glare due to the absence of lenses for low beams, rectification is required.
5
3
Share

How to Turn on the Automatic Wipers on the Mazda Atenza?

Push the wiper lever upward once to activate the automatic wipers, which adjust the wiper speed according to the intensity of the rain. Push it upward once more to switch to the LO (low) mode. Push it upward again to switch to the HI (high) mode, activating the high-speed wipers. Return the lever to the OFF position. Push it downward once to activate a single wipe of the front windshield. Press the button at the top of the lever to activate the rear wiper. Pull the lever toward yourself to spray washer fluid onto the front windshield and activate the wipers. Push the lever forward to spray washer fluid onto the rear windshield and activate the rear wiper.
3
1
Share

Why can't the motorcycle accelerate?

Reasons why the motorcycle can't accelerate are as follows: Lean air-fuel mixture: There are many reasons for a lean mixture, mainly including: fuel needle adjusted too low; fuel level set too low; partial blockage of the main jet; loose or leaking carburetor connections; air filter not installed; insufficient fuel supply from the tank fuel valve. Poor crankshaft case sealing in two-stroke engines: Leaking crankshaft oil seal on the generator side; leaking joint surface at the crankshaft case seam; leaking joint surface between the crankshaft case and cylinder or incorrect piston installation direction. Issues with the two-stroke engine reed valve: Damaged reed valve; reverse installation of the rotary valve causing carburetor backfire.
1
3
Share

How to Restore One-Touch Window Operation for the Mazda Atenza?

Press and hold the switch to the first position until the window moves to the desired position. Applying more pressure will engage the second position, causing the window to open completely. Pull and hold the switch to the first position until the window moves to the desired position. Applying more force will engage the second position, causing the window to close completely. In addition to the door handle controls, you can also use the car key. Press and hold the lock button for 3 seconds, and all windows will automatically roll up.
11
2
Share

How Deep Can a Sidewall Cut Be on Michelin Tires?

Tire sidewall cuts exceeding 4mm require immediate replacement. Below are key tire maintenance precautions: 1. Preventing Blowouts: Blowouts can result from multiple factors including tire quality issues, improper inflation pressure (either too high or too low), vehicle overloading or uneven loading, excessive speed, incorrect driving techniques, and overheating. Regular tire inspection and maintenance are crucial for prevention. 2. Avoiding Underinflation Damage: Maintaining correct tire pressure is fundamental to tire care. Check inflation pressure before driving, during trips, and after parking to identify and address any pressure loss promptly, thereby preventing underinflation damage.
15
2
Share

What are the hazards of not having a fender liner?

The hazard of not having a fender liner is the inability to block mud and sand. The fender liner prevents water and mud from splashing onto the bottom of the vehicle compartment, reducing damage and corrosion to the chassis caused by gravel and mud thrown up by the wheels. However, it is best to have a fender liner to minimize damage to the chassis. Concept of the fender: The fender, also known as a wing panel, is divided into front and rear fenders based on installation position. It is a type of covering part on motor vehicles and non-motor vehicles. Function of the fender: According to fluid dynamics, it reduces the drag coefficient, making the vehicle more stable during driving. The front fender prevents gravel and mud thrown up by the wheels from splashing onto the bottom of the vehicle compartment, reducing damage and corrosion to the chassis.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.