···
Log in / Register

Can the Vehicle Inspection Sticker Be Left Unattached?

5 Answers
NatalieRose
07/29/25 5:31pm

Vehicle inspection stickers must not be left unattached. The inspection sticker represents a mandatory test for every vehicle that has obtained official license plates and a registration certificate. It is equivalent to an annual physical examination for the vehicle based on the technical safety requirements for motor vehicle operation. Its purposes include: 1. Timely elimination of potential vehicle safety hazards; 2. Encouraging enhanced vehicle maintenance; 3. Reducing the occurrence of traffic accidents. The consequences of not displaying the inspection sticker are: 1. The vehicle cannot be driven on the road; 2. In the event of a traffic accident, the involved party will bear full or primary responsibility, and the insurance company will not provide compensation; 3. The vehicle may be impounded.

Was this review help?
16
5
Share
OmarMarie
08/14/25 8:36am

When I first started driving, I always wondered if the inspection sticker could be left unposted. Once, I got lazy and didn’t put it up, and was immediately fined 200 yuan by the traffic police. The law requires it to be affixed to the upper right corner of the windshield; otherwise, even if the vehicle passes inspection, it’s considered invalid. The fine is a minor issue—what’s really troublesome is the points deduction. Accumulate too many, and you’ll have to retake the test. Not to mention, in case of an accident, the insurance company might deny your claim if they see the sticker missing, leaving you fully liable. So now, I always post the new sticker on time to avoid being stopped and delayed at intersections. Actually, putting it up is simple—just stick it right after the inspection and keep it clean without obstructing your view. Once it becomes a habit, it gives peace of mind and enhances driving safety.

Was this review help?
5
3
Share
Expand All
LeMadison
10/13/25 7:25am

As a car owner for many years, I once forgot to affix the inspection sticker and happened to encounter a strict enforcement period, resulting in demerit points and a fine—a painful lesson. Not displaying the sticker is not only illegal and increases financial burdens, but it may also lead police to suspect vehicle issues, potentially requiring a secondary inspection, which is even more troublesome. In daily life, affixing the sticker is a fundamental obligation, ensuring your car has passed safety tests, such as functioning brakes and lights. In the event of a minor collision, lacking the sticker can make disputes unavoidable. Personally, I recommend taking a photo of the affixed sticker for record-keeping, making it easy to check the validity period on your phone and reducing the risk of forgetfulness. In short, don’t skip this step for convenience—spend a few minutes to affix it properly for peace of mind and safety, especially before long-distance drives.

Was this review help?
6
5
Share
Expand All
DiColeman
11/26/25 8:25am

The inspection compliance sticker is a mandatory decal for vehicles, and not displaying it is absolutely unacceptable. From the very first day I started driving, I've made it a habit to affix the sticker because the law requires it to be visibly displayed as proof that the vehicle has passed safety inspections. Failure to display it can result in fines, penalty points, and may even delay your annual inspection process. Safe driving relies on this sticker to serve as a warning, ensuring others can see that your vehicle has been inspected. Making it a habit to display the sticker is simple and quick.

Was this review help?
5
3
Share
Expand All
LaOwen
01/17/26 3:04am

In daily driving, I find affixing inspection stickers a bit annoying but necessary. Not displaying them may lead to unexpected fines, such as when patrolling officers can't spot them at a glance and issue tickets directly. After placing the sticker, ensure it remains prominently visible and secure it with transparent tape to prevent detachment. Extending the discussion, timely sticker placement also reduces theft risks, as vehicles without visible decals are more likely to be perceived as illegal. I regularly set reminders on my phone app to replace stickers while simultaneously checking my vehicle's condition to ensure everything is in order. In short, properly displaying stickers is a small effort with significant returns, safeguarding driving convenience and safety.

Was this review help?
11
1
Share
Expand All
More Forum Discussions

How Many Years Until a Pickup Truck is Mandatorily Scrapped?

In China, pickup trucks are classified as light-duty trucks with a mandatory scrapping period of 10 years. However, owners can apply for an extension of up to 5 years. During the extension period, the vehicle must undergo two annual inspections. This means a pickup truck can be used for a maximum of 15 years before mandatory scrapping.
19
1
Share

What is the difference between Dunlop LM705 and SP270?

The difference between Dunlop LM705 and SP270 lies in their positioning. The Dunlop LM705 focuses on quietness, comfort, and high stability, while the SP270 emphasizes energy efficiency and environmental friendliness. Dunlop LM705: Good stability and handling, quiet, comfortable. Its tread incorporates various high-tech features, with tread rigidity enhanced from the inside out, effectively providing stability and handling. It also has certain noise reduction capabilities. Dunlop SP270: The Dunlop SP-SPORT-270 offers strong performance and complete comfort. It is a typical passenger car tire, specially enhanced with high-tech materials, featuring high-quality noise reduction performance. Its unique tread design provides drivers with a comfortable driving experience. These characteristics of the Dunlop SP-SPORT-270 allow the vehicle to better meet the needs of young consumers. The Dunlop SP270 tire is known for its low noise and elegant comfort, enhancing the perfect joy and experience of life.
5
0
Share

What Causes Engine Vibration When Sitting in a New Car?

Engine vibration when sitting in a new car can be caused by the following reasons: Engine intake pipe leakage: The intake system contains many intake manifolds or valves. Leakage in these components can allow unintended gases to enter, causing the air-fuel mixture in the intake manifold to become either too rich or too lean. This ultimately leads to intermittent engine vibration or weak performance during idle. Fuel system blockage or malfunction: Blockages in the fuel tank vent hole, fuel tank switch, fuel filter, or fuel lines between the tank and carburetor can prevent the engine from receiving adequate fuel during idle. This results in a lean air-fuel mixture, reduced engine power output, and idle vibration.
15
3
Share

How to Read an Automotive Refrigerant Pressure Gauge?

Here's how to read an automotive refrigerant pressure gauge: 1. Observe the black scale inside - normal gas pressure should be between 0.45~0.5MPa. This is a low-pressure gauge, typically used for household air conditioners which can only measure low pressure. 2. The scale on the gauge indicates pressure. By reading the pressure display, you can determine the compressor's discharge pressure (high pressure) and suction pressure (low pressure), thereby assessing whether the system is operating normally and identifying potential issues like system blockage or refrigerant leaks. Additional relevant information: The gauge should display MPa (megapascal) and bar - commonly used pressure units in China. 0.1MPa = 1bar = 1kg/cm². Note that kg/cm² is no longer a nationally standardized measurement unit and isn't marked on gauges anymore, though it's still commonly used in verbal communication. Taking commonly used R22 refrigerant as an example, under different ambient temperatures, the normal working low pressure typically ranges between 3-6 bar, while high pressure generally ranges between 10-25 bar.
9
2
Share

What is the actual fuel consumption of the Haojue VF100 EFI?

The comprehensive fuel consumption per 100 kilometers is 1.9 liters. With a 6-liter fuel tank capacity, it can run for 300 kilometers. The following is an introduction to the Haojue VF100: 1. Appearance: The length, width, and height of this car are 1775mm × 645mm × 1065mm, and the wheelbase is 1230mm. 2. Brakes: In terms of the braking system, this car adopts a front disc and rear drum design, which avoids strong inertial impact. The car has good steering control and can pass through overgrown areas. In terms of shock absorption, this car is relatively average, adopting an upright, front shock absorption, and rear single-stage deceleration, which is very difficult to adjust. It is recommended to drive at reduced speeds on rough roads to minimize vehicle damage. The tire size is very small, using 90-90-105 tires. The seat bucket capacity is small, and a trunk can be installed. The minimum ground clearance is 110mm. 3. Power: In terms of the engine, this car is equipped with a single-cylinder engine with an actual displacement of 120cc, a maximum power of 5kW, and a maximum torque of 7.4nm. It is paired with a CTV transmission, and the acceleration time from 0 to 50 kilometers is 5.33 seconds, making it very quick to start.
20
1
Share

What does BMW im mean?

BMW im stands for a sports car model. Below is the relevant information about this model: 1. Exterior: Equipped with M-specific sport wheels and paint finishes, the iconic double-kidney grille paired with LED headlights featuring an open-eye design on both sides gives it a very sporty and fashionable look. The BMW 3 Series has body dimensions of 4734/1811/1453mm and a wheelbase of 2920mm. As a mid-cycle facelift model, the current version largely maintains high consistency with the previous model. The 2018 3 Series shows minimal exterior changes, with the new version mainly featuring adjustments to the front and rear details. The latest LED headlights come as standard across the range. The most significant changes to the front include the addition of new chrome trim on the lower part of the front bumper and optimized internal structure of the headlights. 2. Interior: The color of the air conditioning display has changed from the previous orange-red to white. Orange-red has always been a signature feature of BMW, and this change improves visibility but seems to lack some tradition. The iDrive control buttons have also been upgraded, becoming more refined and now including navigation functionality. 3. Powertrain: The 2018 BMW 3 Series continues to be powered by 1.5T and 2.0T engines, with the 2.0T engine available in high/low power versions. The maximum power outputs are 135kW (184Ps) and 185kW (252Ps), respectively, with peak torques of 270N·m and 350N·m. The transmission system is paired with an 8-speed automatic transmission.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.