···
Log in / Register

Can the vehicle body cross the line during a right-angle turn?

5 Answers
BeckettFitz
07/29/25 7:51pm

During a right-angle turn, the vehicle body can cross the line, but the wheels must not press on the line. Below are precautions regarding vehicle turning: Turning on urban roads: Drive slowly and yield to others. Urban areas have heavy traffic and many pedestrians. Before turning, activate the turn signal to indicate your intention. When turning, remember to slow down, look carefully, and then proceed. Turning in rainy or foggy weather: Visibility is poor in rainy or foggy conditions. When approaching a curve, sound the horn in advance. During the drive, turn on the parking lights and fog lights to make your driving status and position visible to other vehicles, and reduce speed when meeting oncoming traffic. Turning at intersections: Observe both sides. When turning at a road intersection, conduct a comprehensive observation to avoid collisions. If making a left turn, pay attention to traffic signs, activate the turn signal in advance, and try to minimize the turning radius.

Was this review help?
4
5
Share
AllieAnn
08/14/25 3:29pm

I believe that the vehicle body must absolutely not cross the line during a 90-degree turn, especially when learning to drive or during exams. I often teach people to practice driving, and the right-angle turn is a mandatory item in the Subject 2 test. If your vehicle body touches or exceeds the marked lines, the examiner will directly deduct points or even deem it a failure. The exam rules are strict commands—you must keep both the wheels and the body within the lines to avoid crossing and pass the test. In actual driving, while not strictly penalized every time, crossing the line is very dangerous: a sliding vehicle body during a turn can easily scrape curbs, hit obstacles, or even affect the safety of oncoming vehicles or pedestrians. I recommend that beginners practice turning techniques more: drive slower, aim more accurately, and control the timing of steering wheel turns. Also, pay attention to the influence of the vehicle type—small cars with a smaller turning radius may be easier to control, while larger vehicles require advance preparation. Developing good habits makes daily driving much safer, avoiding unnecessary accidents and fines.

Was this review help?
1
3
Share
Expand All
AlexRose
08/14/25 3:30pm

I remember struggling with right-angle turns during driving lessons, often crossing the line with the car body. The instructor repeatedly emphasized not to cross the line, as touching the line during the test would mean failing and having to retake. I also tried turning the wheel too early or too late a few times, resulting in the rear wheels pressing against the outer line and wasting my chances. While crossing the line isn’t penalized in everyday driving, it poses risks: sharp turns might scrape the curb or affect others, especially on narrow roads. I think the key to mastering turns is driving slowly, aligning with the markings using the rearview mirror, and not rushing the steering. Beginners should practice simulations multiple times to get used to the vehicle’s dimensions; larger cars can be harder to control. Now, with more experience, I understand that staying within the lines isn’t just safer but also more convenient and hassle-free.

Was this review help?
13
1
Share
Expand All
Mark
10/15/25 7:45am

My child just got their driver's license, and I'm quite concerned about whether the car body will cross the line during right-angle turns. The exam rules are very strict—the car body must stay within the lines, or it's an automatic fail, meaning they have to retake the course. This requirement is good because it helps build safe driving habits: if the car crosses the line during a turn, it could easily slide out of the lane and hit something or startle others. In daily driving, I remind my child to take turns slowly, leave some margin, and observe the road conditions carefully before turning the steering wheel. Safety comes first—don't cut corners and risk bigger problems. I've watched my child practice, and they often cross the line when turning the wheel too late. With more practice and better timing, they'll improve. Parents should support their children in learning to drive well—a solid foundation will benefit them for life.

Was this review help?
12
3
Share
Expand All
AnnaDella
11/28/25 8:36am

In safe driving, I insist on making 90-degree turns without the car body crossing the line. The risk of crossing the line is significant: during a turn, the car body sliding out could encroach on the opposite lane or sidewalk, potentially causing a collision, especially in complex intersections. Traffic regulations encourage driving within the lines to ensure order; during driving tests, crossing the line directly results in failure, which is a hard rule. I've also encountered situations where a novice driver made a sharp turn, causing the car body to cross the line and nearly collide—a profound lesson. My advice is to develop the habit of slowing down and observing before turning, steering steadily, and ensuring there's enough space before proceeding. Extra caution is needed in heavy traffic to avoid disputes caused by crossing the line. Remember, prevention is better than cure, and small safety details can save lives.

Was this review help?
3
3
Share
Expand All
More Forum Discussions

How to reset the maintenance reminder on Changan CS75?

The method to reset the maintenance reminder on Changan CS75 is: 1. Turn the ignition switch to the 'on' position to power up the entire vehicle; 2. Press the selection button on the left side of the steering wheel; 3. Hold down the reset button for about 5 seconds; 4. While keeping the reset button pressed, turn off the vehicle power and then turn it back on to complete the reset. The Changan CS75 is a compact SUV. Taking the Changan CS75 2021 Glory Million 280T Manual Elite model as an example, its body dimensions are: length 4650mm, width 1850mm, height 1715mm, wheelbase 2700mm, and fuel tank capacity 58 liters.
20
4
Share

How Many Kilometers for a New Car's Break-in Period?

New cars generally require a break-in period of 1,000-1,500 kilometers. Check for paint imperfections: When a car leaves the factory, the paint should be smooth and flawless, as new cars undergo inspections before leaving the plant. However, during transportation from the manufacturer to the dealership, the car may suffer scratches or dents. Some dealers may repaint these areas and sell the car as new. Therefore, when taking delivery, it's crucial to inspect the paint for smoothness and evenness. Any imperfections could indicate a repainted transport-damaged vehicle. Check the manufacturing date: Cars that remain unsold for several months after production become inventory vehicles. Always verify the manufacturing date when taking delivery.
17
0
Share

What are the three stages from a novice to an experienced driver?

Here is an introduction to the three stages from a novice to an experienced driver: Stage One: Driving cautiously at a snail's pace, never cutting in or changing lanes. Feeling nervous and sweating palms when hearing a horn, extremely tense, afraid of hitting other cars. Stage Two: After a few months, cutting in, changing lanes, road rage, and aggressive driving become the norm—believing all other drivers except oneself are incompetent. Stage Three: After another two years, the mindset gradually calms down. The novelty of driving wears off, and driving like a race car every day feels exhausting. Preferring a slower pace, prioritizing safe driving, avoiding unnecessary overtaking or lane changes, and yielding to aggressive drivers when possible.
18
3
Share

Where is the radiator located in a Nissan Teana?

The radiator in a Nissan Teana is located in the front engine compartment, next to the power steering fluid reservoir. The maintenance methods for the radiator include: 1. Park the vehicle and turn off the engine, wait for the coolant temperature to drop, then open the expansion tank and add radiator cleaner; 2. Start the engine and let it idle for 5 to 10 minutes after the cooling fan starts working; 3. Turn off the engine and remove the front bumper of the vehicle; 4. Ensure the coolant temperature has completely cooled, then drain the radiator cleaner along with the coolant and replace it with new engine coolant. The Nissan Teana is a mid-size 4-door 5-seater sedan with body dimensions of 4901mm in length, 1850mm in width, 1450mm in height, and a wheelbase of 2825mm.
12
3
Share

Is the window film applied on the inside or outside?

Window film is applied on the inside for the following reasons: 1. It is not exposed to wind and rain, slowing down the aging process and extending its service life; 2. The film is less susceptible to external interference during use, avoiding scratches and damage. The areas where window film is applied include: front windshield film, rear windshield film, side window film, and quarter window film. The functions of window film are: 1. Heat insulation and sun protection to reduce the temperature inside the car; 2. UV protection to reduce the aging of car interiors; 3. Preventing injuries to passengers in case of accidental glass breakage; 4. Creating a private space; 5. Reducing air conditioning consumption; 6. Enhancing aesthetics; 7. Reducing glare.
11
0
Share

What are the solutions for engine overheating?

Solutions for engine overheating: If the engine temperature is too high, you need to stop driving and then open the engine hood to allow the engine to cool down. Most cars use water-cooled engines, which rely on coolant circulation to dissipate heat. If the engine overheats, the reasons may be: 1. Some pipes in the cooling system are blocked; 2. The coolant has not been changed for a long time; 3. The thermostat is damaged. The coolant has two circulation paths in the engine: one is the large circulation, and the other is the small circulation. The thermostat controls the switching between the large and small circulations. If the thermostat is faulty, the engine will continue to operate in the small circulation even after reaching the normal operating temperature, leading to overheating.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.