Can the Transmission Fluid of the Languang Automatic Transmission Not Be Replaced?

1 Answers
LaJames
07/29/25 10:36am
Languang automatic transmission fluid can be replaced. Specific instructions are as follows: The Languang automatic transmission fluid can be replaced, but it should not be replaced randomly. It is necessary to use the appropriate transmission fluid that matches the transmission model. Improper use can easily damage the transmission and lead to malfunctions. Below is more information about transmission fluid replacement: 1. Introduction: Transmission fluid is used in automobile transmissions to clean and lubricate the gear system, extend the life of the transmission device, and has functions such as cleaning, lubrication, rust prevention, and heat dissipation. 2. Types: Depending on the type of automobile transmission, transmission fluid can be divided into manual transmission fluid and automatic transmission fluid. 3. Replacement cycle: Generally, it should be replaced every 3 years or approximately 100,000 kilometers.
Was this review help?
20
5
Share
More Forum Discussions

How to Tell if the Car You're Picking Up is New?

Introduction to determining whether the car is new when picking it up: 1. Check the manufacturing date. If the manufacturing date is close to the pickup date, it is a new car. Conversely, if the manufacturing date is far from the pickup date, it may be an old car or a problematic car. 2. Verify whether the engine model, engine number, and chassis number match the manual. Check the vehicle's certificate of conformity and other relevant documents, and inspect the car body paint for any damage. Ensure the paint color matches the manual. 3. Open the hood and check if the engine has severe oil stains and whether all parts are clean. 4. Start the car, lightly press the accelerator, and listen for any abnormal noises or unusual vibrations. Check if the dashboard tachometer is functioning normally and if the odometer displays normal data (a new car's odometer should not exceed 30 kilometers). 5. Turn on the audio system, wipers, air conditioning, and other electronic devices to ensure they operate normally. 6. Test all switches multiple times to check for any abnormal sounds. Inspect the tire pressure, ensure the tires are brand new, and look for any scratches.
2
2
Share

Does the Peugeot 508 Have Independent Suspension?

The Peugeot 508 features independent suspension, utilizing a combination of front MacPherson strut independent suspension and rear multi-link independent suspension, with a relatively high level of chassis flatness. More details are as follows: 1. Each wheel is individually mounted to the body or axle via a suspension system, with the axle being of the split type, the middle section of which is fixed to the frame or body. This type of suspension ensures that impacts on one wheel do not affect the other, and due to its lightweight nature, it offers strong buffering and shock absorption capabilities, providing a comfortable ride. All performance indicators are superior to those of non-independent suspension systems, though this type of suspension is more complex in structure and can complicate the drive axle and steering system. 2. The MacPherson strut suspension is currently the most widely used suspension structure in front-engine, front-wheel-drive cars and some light passenger vehicles. The telescopic shock absorber serves as the sliding column, with the inner end of the transverse swing arm connected to the body via a hinge and the outer end connected to the steering knuckle via a ball joint. The upper end of the shock absorber is connected to the body, while the lower end is connected to the steering knuckle. Most of the lateral forces acting on the wheel are borne by the transverse swing arm, with the remainder absorbed by the shock absorber piston and rod. The line connecting the center of the upper hinge of the telescopic shock absorber and the center of the ball joint at the outer end of the transverse swing arm forms the kingpin axis, making this a kingpin-less structure. Spiral springs are commonly used in independent suspension systems, necessitating the addition of guiding devices—such as rods—to handle and transmit lateral, vertical, and longitudinal forces. To reduce vehicle weight and simplify the structure, some cars employ multi-link suspension systems. The upper link is connected to the body (or frame) via a bracket, with its outer end connected to the third link. Both ends of the upper link are fitted with rubber vibration isolation bushings. The lower end of the third link is connected to the steering knuckle via a heavy-duty thrust bearing. Multi-link suspension systems offer excellent handling stability and can reduce tire wear. Unlike MacPherson suspension systems, the shock absorbers and spiral springs in this type of suspension do not rotate with the steering knuckle.
3
5
Share

What is the battery model for Audi car keys?

The battery model is CR2032. It is a lithium manganese dioxide battery, named according to the IEC standard. Among them: C- indicates a chemical battery system with lithium metal as the negative electrode and manganese dioxide as the positive electrode; R- indicates that the battery is cylindrical in shape, with F used if it is square; 20 indicates the battery diameter is 20mm; 32 represents the battery height of 3.2mm. The nominal voltage is 3.0V, the endpoint voltage is 2.0V, and the rated capacity is around 200mAh. CR2032 typically has a lifespan of 5 years. If the manufacturer's production level is low or quality control is poor, its lifespan can be significantly shortened. Domestic first-tier brand batteries can generally guarantee this lifespan. Under ideal conditions (sealed, room temperature, no moisture, etc.), the lifespan can be extended further to 8 years or even 10 years. The usage time of a car remote key battery is closely related to the frequency of use—the more frequently it is used, the shorter its lifespan. If the remote key battery runs out, the mechanical key can be used directly to open and start the vehicle. The batteries used in car remote keys are button batteries, mainly three types: CR2016, CR2025, and CR2032. For the specific model used in each vehicle, owners can refer to the battery model in the user manual for replacement. Button-type CR2016 battery: This is one of the most commonly used remote key batteries. The battery voltage is 3V, and most car key batteries are powered by 9V, so all three batteries need to be replaced each time. Examples include Honda, Toyota, Volkswagen, Mazda, etc. CR2016 specifications: battery diameter is 20mm, thickness is 1.6mm. Button-type CR2025 battery: Its usage rate is much lower than CR2016, but some car keys still use it. It is thicker than the 2016 model but has a relatively higher storage capacity. CR2025 specifications: battery diameter is 20mm, thickness is 2.5mm. This type of battery is also commonly used in audio remotes. Button battery CR2032: Its thickness is twice that of CR2016. The 3V-CR2032 lithium manganese battery belongs to the lithium-manganese dioxide structure. The positive electrode material is chemically stable manganese dioxide, the negative electrode material is metallic lithium, and the electrolyte is a lithium battery electrolyte. The main components of the electrolyte are dimethoxyethane, propylene carbonate, and lithium perchlorate. Its shape resembles a button, hence the name button lithium battery or lithium manganese button battery.
3
3
Share

How to Install a Hidden Dash Cam?

Hidden dash cams require professional installation. Typically, these dash cams are installed at the top of the interior rearview mirror, with the camera attached to the front windshield. Due to the complexity of installation, it is not recommended for car owners to install it themselves. Hidden dash cams offer a sleek appearance without messy wiring, but the installation process is more complicated and should be done at a 4S shop or professional service center. Many car brands now come with factory-installed hidden dash cams, which are usually integrated with the interior rearview mirror.
9
0
Share

Is there an imported version of the Swift?

There is an imported version of the Swift, but it has not been introduced to the domestic market. The imported version of the Swift is called the Swift Sport. The Swift is a compact car that has gained popularity among many consumers in China. The Swift is equipped with two engines: a 1.3-liter naturally aspirated engine and a 1.5-liter naturally aspirated engine. The front suspension of the Swift uses a MacPherson independent suspension, while the rear suspension uses a torsion beam non-independent suspension. The car's appearance is stylish, and it is very lightweight and agile to drive. Some racing enthusiasts even modify the Swift for track use.
15
4
Share

Which car brand does the Optima belong to?

The Optima belongs to the Kia car brand, and this model has been discontinued. It was a mid-sized car. The Optima was equipped with a 2.0-liter naturally aspirated engine, which had a maximum power output of 101 kilowatts and a maximum torque of 178 Newton-meters. The engine reached its peak power at 6,000 revolutions per minute and its peak torque at 4,500 revolutions per minute. The Optima featured a MacPherson independent front suspension and a multi-link independent rear suspension, providing excellent comfort. Kia is an automobile manufacturer from South Korea, known for its stylish car designs and high-end configurations.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.