···
Log in / Register

Can the ticking sound in Lavida be resolved?

4 Answers
LeFrank
09/01/25 7:45am
Lavida ticking sound can be resolved. Fault information: Piston material issues, where the engine oil cannot adapt to the piston material, causing wear. It is necessary to replace the piston with an improved version. Improper use of engine oil or failure to replace expired oil can affect the normal operation of the engine. The correct engine oil type must be selected, as different friction coefficients also impact engine performance. Solution: Engine problems need to be detected and resolved early to avoid significant losses. Additionally, it is important to change the engine oil promptly and avoid using inferior quality oil. During each maintenance session, pay attention to inspections and replace these rubber components in a timely manner.
Was this review help?
4
5
Share
LeLogan
09/14/25 3:26am
As an experienced driver who has been behind the wheel for many years, I think the rattling issue with the Lavida can mostly be resolved. Common causes include loose chassis screws or unfastened parts in the engine compartment, such as suspension brackets or pulley wheels. First, take a look under the car yourself and try tightening the bolts with a wrench, or have a friend help locate the source of the sound. If the rattling persists, it's advisable to visit a professional repair shop for an inspection—you might need to replace a small component like a shock absorber sleeve. Don't delay too long, as the noise could worsen and affect safety. Last time, I fixed it myself with parts costing less than a hundred bucks. Regular maintenance can prevent such minor issues, so just stay attentive before driving. The Lavida is generally reliable, so don't worry too much about major problems.
Was this review help?
9
3
Share
Expand All
LauraLynn
09/14/25 3:28am
I've been repairing cars myself for several years and should be able to solve the ticking sound issue with the Lavida. Usually, it's caused by problems with the tires or brake components, such as worn wheel bearings or warped brake discs. You can start with the simple approach: remove the wheel, check the lubrication of the bearings, and try adding some specialized oil. If the noise reduces, you can save some money and effort; otherwise, just visit a nearby repair shop. The ticking sound isn't a big trouble—I've encountered it before, and replacing the brake disc completely silenced it. During regular car washes, take the opportunity to inspect the undercarriage to prevent unexpected issues. Remember not to drive fast on bumpy roads to avoid accelerating wear. In short, fix it early to avoid getting annoyed after driving for a long time.
Was this review help?
16
1
Share
Expand All
PresleyFitz
10/28/25 4:09am
The ticking sound in the Lavida can be resolved, but I suggest not taking it lightly. It's mostly caused by loose engine or transmission components, such as corroded pulleys or connecting rods. You should directly go to an authorized service station for inspection. Technicians will use instruments to pinpoint the issue, and tightening a few screws might solve it. Such sounds are often warnings; delaying repairs could lead to major failures. I've personally encountered a similar situation and timely repairs prevented trouble. Regular maintenance is the best strategy—don't wait for sounds to appear before taking action. Safe driving relies on attention to detail, so don't overlook minor issues.
Was this review help?
18
3
Share
Expand All
More Forum Discussions

What Does It Mean When the Battery Warning Light Comes On in a Car?

The illumination of the battery warning light indicates that the generator voltage is lower than the battery voltage, resulting in a power supply circuit fault. At this time, the vehicle is running on battery power, and the generator should be inspected and repaired at a repair shop as soon as possible. Below are specific details about car batteries: 1. Classification of batteries: Car batteries are divided into maintenance-free batteries and conventional batteries (lead-acid batteries). Most current vehicle models use maintenance-free batteries, while many Japanese cars use conventional batteries. Conventional batteries have electrodes made of lead and lead oxide, with an electrolyte of sulfuric acid solution. Their lifespan is generally around 2 years, so replacing them every two years is most reasonable. 2. Regular maintenance: To extend the battery's lifespan, regular maintenance and good driving habits are necessary. When the electrolyte is insufficient, the battery may not hold a charge, requiring timely refilling. After turning off the car, ensure all lights are off to avoid excessive battery drain. If the car is parked for an extended period, it is recommended to disconnect the battery's negative terminal to prevent discharge. It is also advisable to start the car once a week, allowing the battery to charge at idle speed via the internal generator, ensuring sufficient power for the next start.
12
2
Share

What is the function of the camshaft?

Automobile camshaft is responsible for controlling the opening and closing of the valves. Below are the key points about the camshaft: 1. Camshaft: It is a component in piston engines. Although in four-stroke engines, the camshaft rotates at half the speed of the crankshaft, its rotational speed is still very high, and it needs to withstand significant torque. Therefore, the design requires high strength and robust support for the camshaft, which is typically made of high-quality alloy steel or alloy steel. 2. If: The oil pump fails to provide sufficient oil pressure due to prolonged use, or the lubrication passages are blocked preventing oil from reaching the camshaft, or the bearing cap fastening bolts are over-tightened preventing oil from entering the camshaft clearance, all these can lead to abnormal wear of the camshaft. 3. Abnormal wear of the camshaft: This can cause an increase in the clearance between the camshaft and the bearing seat, leading to axial displacement of the camshaft during operation, which in turn produces abnormal noise. 4. When installing the bearing cap: Pay attention to the directional arrows and position numbers marked on the surface of the bearing cap, and strictly follow the specified torque using a torque wrench to tighten the bearing cap fastening bolts.
9
3
Share

How to Check Tire Pressure on Audi Q5?

Audi Q5 tire pressure checking method: Start the car, view the central display screen and touch the CAE button on the left; enter the relevant menu information in vehicle settings, select tire settings in the vehicle settings options; in tire settings, click tire monitoring to view tire pressure. There are three commonly used tire pressure monitoring methods: Direct tire pressure monitoring: The direct tire pressure monitoring device uses pressure sensors installed in each tire to directly measure tire pressure, and uses wireless transmitters to send pressure information from inside the tire to the central receiver module, then displays the tire pressure data of each tire. When the tire pressure is too low or leaking, the system will automatically alarm. Indirect tire pressure monitoring: When the pressure of a tire decreases, the weight of the vehicle will cause the rolling radius of that wheel to become smaller, resulting in its rotation speed being faster than other wheels. By comparing the speed difference between tires, the purpose of monitoring tire pressure is achieved. The indirect tire alarm system actually relies on calculating the rolling radius of the tire to monitor pressure. Introduction to Tire Intelligent Monitoring System (TPMS): It combines the advantages of the above two systems, equipping direct sensors in two diagonally opposite tires and a 4-wheel indirect system. Compared with using all direct systems, this composite system can reduce costs and overcome the defect that the indirect system cannot detect when multiple tires simultaneously have low pressure. However, it still cannot provide real-time data of the actual pressure in all four tires like the direct system.
20
2
Share

Where is the accelerator pedal located?

The accelerator pedal is located at the far right side below the driver's compartment on the left. The accelerator pedal is a device that controls the fuel supply on an internal combustion engine. In automotive engines, the throttle is typically controlled by a pedal, also known as the gas pedal, which regulates the fuel supply to the engine. When operating the accelerator pedal, it is important to 'press gently and release slowly.' The pressing action should be smooth, and the force and extent of pressing should be determined based on the vehicle's driving conditions. During driving, the left foot should not be placed on the brake pedal. For manual transmission vehicles, the left foot should only be used to press the clutch pedal when shifting gears. Under normal driving conditions, the left foot should not be placed on any pedal. Both braking and acceleration are controlled solely by the right foot. There are two key reasons why the left foot should not be placed on the pedal: 1. During prolonged driving, both feet can become quite tired, leading to an unconscious tendency to press down. If the left foot is on the brake pedal at this time, pressing it could easily cause an accident, posing a significant danger. 2. Most people are right-handed, meaning the right foot has faster reaction times. In emergency situations, the right foot can react in the shortest possible time, lifting off the accelerator and pressing the brake pedal. If the left foot is on the brake pedal, the right foot would be in a suspended state during braking, making it easy for both feet to press simultaneously, which can be dangerous.
2
2
Share

Must the Clutch Be Depressed When Braking in a Manual Transmission Car?

When braking in a manual transmission car, there are situations where the clutch needs to be depressed and others where it does not, as this is not a fixed procedure. The primary purpose of depressing the clutch while braking is to prevent stalling. Below are some considerations regarding clutch usage in manual transmission cars: 1. There is no need to depress the clutch when the speed has not reached the critical point. During turns, depressing the clutch can sometimes make the car more prone to tipping over, as it causes a sudden loss of tire grip. 2. The car will not stall if the speed is above 20 km/h in third gear, above 25 km/h in fourth gear, and above 35 km/h in fifth gear. This means that when braking during driving, each gear must maintain a speed above its minimum threshold; otherwise, the clutch must be depressed to prevent stalling. 3. When the speed is suitable for shifting to a higher gear, immediately release the accelerator pedal, depress the clutch pedal, and move the gear lever to the neutral position; then quickly release the clutch pedal and immediately depress it again while shifting the gear lever to the higher gear. Subsequently, gradually release the clutch pedal while slowly depressing the accelerator pedal to ensure the car continues to drive smoothly.
5
2
Share

At What Age Can a Baby Sit in a Safety Seat?

Safety seats are suitable for babies around seven months old. Here is some relevant information about safety seats: 1. Classification: Child safety seats can be categorized into three types based on the fixing methods: the European standard ISOFIX fixing method, the American standard LATCH fixing method, and the seat belt fixing method. 2. Installation Reminder: They should not be installed on the front seats of cars equipped with airbags. Additionally, it is important to note that if a child safety seat can be installed rear-facing, it must be installed in this manner, as this maximizes the protection of the child's safety.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.