Can the throttle be fully depressed in first gear of a manual transmission?

2 Answers
DiCatherine
07/30/25 1:28am
Manual transmission first gear should not have the throttle fully depressed. When starting, gently press the accelerator to add a little fuel. Gear shifting precautions: First, turn on the power (without starting the engine), press the brake, shift gears—not directly into D gear, but shift to N gear first, then ignite, and then shift from N gear to D gear, release the handbrake, lift the foot brake, and start. Manual transmission usage tips: For manual shifting mode, simply switch the gear to M gear. This mode allows the driver to manually select the appropriate gear between 1st and 4th gears, enabling the car to drive as if equipped with a manual transmission, without the need to press the clutch pedal when shifting gears like in a manual transmission.
Was this review help?
19
2
Share
DeLucille
08/15/25 7:10am
When I first started driving, I was also curious about this. Can you really floor the throttle in first gear with a manual transmission? First, the car's response will be very aggressive—the tachometer will shoot straight into the redline, and the whole car will roar. The engine can't handle this kind of abuse, especially older cars; the sudden high temperatures can easily cause cylinder scoring. I once saw a newbie do this and burn out all the spark plugs, leaving the mechanic stomping in frustration. Plus, first gear already has a high gear ratio, so it’s just a waste of fuel—driving like this in the city for two kilometers could burn an extra half-liter of gas. It’s better to gently press the throttle, shift to second gear at around 2,000 RPM, and keep both the car and yourself comfortable and safe.
Was this review help?
20
2
Share
Expand All
More Forum Discussions

In which city is the headquarters of Hongqi located?

Domestic Hongqi brand cars are produced by FAW Group. In 1958, the first Hongqi brand luxury car was successfully developed, becoming a symbol of national automobiles. China FAW Group Corporation, abbreviated as China FAW or FAW, is headquartered in Changchun City, Jilin Province, with its predecessor being the First Automobile Works. More details about Hongqi are as follows: Introduction 1: The first domestically produced car in China, born in FAW in 1958, was not named 'Hongqi' but 'Dongfeng', designated as CA71. The emblem on the front of the car was not a red flag but a golden dragon. It was renamed 'Hongqi' because of Chairman Mao Zedong's famous assertion about the world situation at that time, 'The East Wind prevails over the West Wind'. The car's engine was modeled after the Mercedes-Benz 190, and the chassis and body were referenced from 'Simca-Vedette'. Introduction 2: As the most representative automotive brand of national industry, Hongqi has broken through multiple technological barriers with seven major technical advantages in new platforms, intelligence, new energy, new power, new technology, and new materials. It has achieved several 'firsts' in China's automotive industry, filling many technological gaps and setting technical standards for Chinese brands.
10
5
Share

What Are the Causes of Metal Friction Noise in the Rear Wheel of a Scooter?

Here are the specific reasons for the metal friction noise in the rear wheel of a scooter: Brake clearance adjusted too tightly: The brake clearance is adjusted too tightly, or the brake block return spring is broken. Bearing wear: The rear axle bearing is worn or damaged. Lack of gear oil: The rear wheel gearbox is low on gear oil. It is necessary to inspect and resolve these issues promptly. Below is additional information about scooters: No gears: Scooters do not have gears; they all use continuously variable transmission (CVT). The front brake is on the right handle, while the rear brake can be either a foot brake or a hand brake. If it's a hand brake, it is located on the left handle, similar to a bicycle's brake. Other configurations: The horn is located on the lower left side, and the turn signals are in the middle of the left-hand switch. Turning the switch to either side activates the corresponding turn signal. Generally, the topmost switch is the headlight dimmer switch. If the headlight switch on the right side is turned on, this switch can be used to toggle between high and low beams.
20
5
Share

Why is the 2021 Honda CR-V experiencing severe configuration reduction?

Honda CR-V 2021 does not have severe configuration reduction. The CR-V (Comfortable Runabout-Vehicle) adheres to the development philosophy of "easy and enjoyable driving anytime, anywhere," and over its 25-year history, it has won the affection of more than 11 million car owners across 160 countries. Since entering the domestic market in 2004, it has successfully pioneered the Chinese urban SUV market with its product strength and has gained the support and recognition of 2.2 million domestic car owners. Exterior: The new CR-V Plug-in Hybrid version is developed with the concept of "Sophisticated Performance" (refined, exquisite, high-performance), further combining Honda's advanced driving dynamics, intelligent quality, dynamic design, and cutting-edge technology. The exterior of the new car has been upgraded, featuring four body colors: Starry Night Blue, Crystal Black, Brilliant White, and Elegant Gold. The CR-V Sharp Hybrid e+ features blackened headlights connected with horizontal chrome trim, creating a strong sense of layering. At the rear, the LED taillights are connected with a full-width chrome strip, enhancing recognition and visual width. The exclusive PHEV badge highlights its fashionable and technological appeal.
6
5
Share

What are the differences between the S6 and RS6?

Audi S6 and Audi RS6 have the following differences: 1. The Audi S6 is equipped with a 4.0T engine, paired with a 7-speed dual-clutch transmission. The 4.0T engine has a maximum output power of 331 kW, a maximum torque of 550 N·m, a top speed of 250 km/h, and a 0-100 km/h acceleration time of 4.4 seconds. The Audi RS6 is equipped with a 4.0T engine, paired with an 8-speed automatic transmission. The 4.0T engine has a maximum output power of 412 kW, a maximum torque of 700 N·m, a top speed of 250 km/h, and a 0-100 km/h acceleration time of 3.9 seconds. 2. The front suspension of the Audi S6 is a five-link independent suspension, equipped with a rear axle limited-slip differential lock, full-speed adaptive cruise control, and other auxiliary configurations. The front suspension of the Audi RS6 is a four-link independent suspension, equipped with a rearview camera, adaptive cruise control, steering wheel memory, HUD head-up display, and other auxiliary configurations.
8
5
Share

What are the button functions of the 2021 Buick Excelle?

2021 Buick Excelle interior function buttons include the following: 1. Center console buttons: (1) Electronic Stability Control (ESC), enabled by default. It is not recommended to turn it off unless on slippery roads such as during rain or snow. (2) Auto Start-Stop, which temporarily shuts off the engine at traffic lights. The vehicle restarts when the driver's foot leaves the brake pedal. (3) Recirculation/Outside Air, where recirculation heats or cools the air inside the car and recirculates it, while outside air allows external air to enter the vehicle. (4) Dual-Zone Sync, when enabled, changing the driver's temperature setting will automatically adjust the other zones to the same temperature. Disabling this feature allows each zone to be set individually to meet the needs of passengers in different seats. 2. Door buttons: (1) Window lock button. (2) One-touch up/down window control switch. 3. Overhead buttons: (1) Sunroof horizontal opening. (2) Front passenger reading lights. (3) Sunroof tilt opening.
4
5
Share

How to reset the wrench light on Chery Arrizo 5?

Here is the method to reset the maintenance light (small wrench) on Chery Arrizo 5: 1. Insert the key and turn it to the second position, which is the ON position. 2. Use the menu switch button on the steering wheel and hold it down without releasing. 3. The car will power on and start self-check, during which all warning lights will illuminate. Wait for the self-check to complete (keep holding the switch button during this time). After about 5 seconds, the small wrench light will be reset. Here are some reasons why the maintenance light may come on in Chery Arrizo 5: 1. Transmission software issue: The transmission software may not have been updated for a long time, or there may be defects in the transmission software, causing the transmission fault light to illuminate. 2. Transmission control unit failure: The car may not move after shifting gears, and the fault light will come on.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.