Can the Tax Payment Certificate for New Energy Vehicles be Processed Online?

1 Answers
Thompson
07/29/25 9:09am
New energy vehicle tax payment certificates cannot be processed online. Procedures for issuing new energy vehicle tax payment certificates: Sign and confirm the new energy vehicle indicator application form, provide a copy of the vehicle conformity certificate, a copy of the owner's ID card, and proof of purchase tax payment. These can be processed at any national tax branch. Relevant requirements: According to tax service regulations, taxpayers applying for a tax payment certificate must provide the original and a copy of the tax registration certificate. According to Article 2 of the "Notice of the State Administration of Taxation on Canceling a Batch of Tax-related Matters and Submission Materials": For tax-related businesses that have been incorporated into real-name tax processing by local tax authorities, the tax handler or agent must provide the original ID card for on-site inspection, and a copy of the ID card no longer needs to be submitted. The original and copy of the tax registration certificate are no longer required to be submitted.
Was this review help?
20
3
Share
More Forum Discussions

How to Replace the Brake Pads on a Volvo XC90?

Here is the method for replacing the brake pads on a Volvo XC90: 1. First, open the engine compartment and check whether the brake fluid level is in the normal position. 2. Use a jack to lift the car, remove the tire first, then use a wrench combined with a socket to remove the bolts of the brake caliper, and then directly take off the brake pads. 3. Install the new brake pads, and the job is done. Of course, the original parts must be reinstalled in the reverse order of removal. Below is some related information about brake pads: 1. Automotive brake pads are generally composed of a steel plate, an adhesive heat insulation layer, and a friction block. The steel plate is coated to prevent rust, and the coating process uses an SMT-4 furnace temperature tracker to detect the temperature distribution during the coating process to ensure quality. 2. The heat insulation layer is made of non-heat-conducting materials, with the purpose of heat insulation. The friction block is composed of friction materials and adhesives. When braking, it is squeezed against the brake disc or brake drum to generate friction, thereby achieving vehicle deceleration and braking.
15
4
Share

What is the Principle of the Oil Pressure Sensor?

The principle of the oil pressure sensor is: When the engine is running, the pressure measurement device detects the oil pressure and converts the pressure signal into an electrical signal, which is then sent to the signal processing circuit. After voltage and current amplification, the amplified pressure signal is transmitted via the signal line to the oil pressure gauge. This changes the current ratio passing through the two coils inside the oil pressure gauge, thereby indicating the engine's oil pressure. Here are some related details: 1. The electronic oil pressure sensor consists of a thick-film pressure sensor chip, signal processing circuit, housing, fixed circuit board device, and two leads (signal line and alarm line). The signal processing circuit includes a power supply circuit, sensor compensation circuit, zero-adjustment circuit, voltage amplification circuit, current amplification circuit, filtering circuit, and alarm circuit. 2. The wiring method of the electronic oil pressure sensor is completely consistent with that of traditional mechanical sensors. It can replace mechanical pressure sensors and directly connect to the vehicle's oil pressure gauge and low-pressure warning light, indicating the oil pressure of the diesel engine and providing a low-pressure alarm signal.
5
1
Share

How to engage 4WD in Mitsubishi Pajero?

There are three main methods to use the 4WD system in Mitsubishi Pajero: 1. Next to the Mitsubishi Pajero Sport's gear lever, there is a smaller 4WD lever. The options are H2, H4, H4L, and L4L - all modes with the number 4 are 4WD modes. H2 is high-speed 2WD, H4 is high-speed 4WD, H4L is high-speed 4WD with differential lock engaged, and L4L is low-speed 4WD with differential lock engaged. 2. This means only H2 is 2WD mode, while the other three are 4WD modes. Simply shift the small lever to the 4WD position. The three different 4WD modes should be selected based on different road conditions - basically, the more challenging the terrain, the further back the mode you should choose. 3. To engage low-range 4WD (L4L), the vehicle must be stopped, while high-range 4WD can be engaged without stopping and allows free switching between 0-80km/h. The front differential lock doesn't require shifting to neutral, but the vehicle must be stationary to engage it.
4
0
Share

What engine does SAIC Maxus use?

SAIC Maxus engines are branded under SAIC Maxus itself. Here are some introductions to other aspects: 1. The engine valve drive mechanism adopts a hydraulic support roller rocker arm structure. Compared with the hydraulic tappet valve drive mechanism commonly used in current gasoline engines, this novel valve drive mechanism has the advantage of relatively small friction torque, thus requiring less driving force, which can effectively reduce engine power consumption and fuel consumption. 2. To effectively reduce the overall vehicle weight, the 1.4-liter gasoline engine uses an aluminum alloy cylinder block, achieving a very significant lightweight effect. 3. Special materials and specially processed plastic intake manifolds are used to replace traditional metal intake manifolds, not only achieving a lightweight effect but also effectively reducing intake manifold wall resistance, improving intake efficiency, and increasing engine power. 4. Advanced processing technology is used for the fracture-split connecting rod. Special fracture-split equipment is used to split the large end hole of the processed connecting rod, instead of the traditional sawing and grinding process. This allows the use of the jagged "halves" surface of the fracture-split connecting rod to ensure absolutely accurate tight positioning, thereby reducing friction and extending the service life of the connecting rod. 5. A hot-sleeve camshaft is used. Compared with the original camshaft, it not only reduces the weight of the camshaft but also achieves higher cam profile accuracy and more precise valve timing.
5
1
Share

What is the fuel consumption of the Toyota Reiz?

Toyota Reiz has a total of 7 models on sale, including the 2021 2.0L CVT Front-Wheel Drive Urban Edition, 2021 2.0L CVT Front-Wheel Drive Fashion Edition, and other 7 models equipped with a 193 horsepower engine, with an NEDC fuel consumption of 9L per 100 kilometers. The fuel tank capacity of different Reiz models varies, and the distance that can be covered with a full tank of fuel is as follows: Models equipped with a 193 horsepower engine have a fuel tank capacity of 70L, and the distance that can be covered with a full tank of fuel is 70/9*100=778KM. The level of a car's fuel consumption is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase a car's fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before reaching a red light, can increase fuel consumption. The car itself: Cars with larger displacement generally consume more fuel than those with smaller displacement because larger displacement usually means greater power, requiring more gasoline to burn and perform work. Cars with greater weight also have higher fuel consumption because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperature: When the engine block temperature is low during a cold start, the injected gasoline is less likely to vaporize, requiring more gasoline to be injected for combustion, thus increasing fuel consumption. Additionally, at low temperatures, the engine's computer may control the engine to run at higher RPMs to warm up, which also increases fuel consumption.
4
4
Share

What are the engine specifications of the Jeep Cherokee?

The Jeep Cherokee is equipped with engine model 46338538, delivering a maximum horsepower of 265 HP and a maximum power output of 195 KW at 5200 rpm, with a peak torque of 400 Nm. The Cherokee's engine is jointly produced by GAC and Fiat Chrysler, assembled domestically in China with technical support from abroad. For daily maintenance of the Cherokee's engine, the following methods are recommended: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, ensuring the standard meets or exceeds the manufacturer's requirements. Regularly change the oil and filter. The quality of any lubricating oil deteriorates over time. After a certain mileage, degraded oil can cause various engine issues. To prevent malfunctions, change the oil periodically according to usage conditions and maintain an appropriate oil level. As oil passes through the fine pores of the filter, solid particles and viscous substances accumulate in the filter. If the filter becomes clogged and oil cannot pass through, it may rupture the filter or open the safety valve, bypassing the filter and carrying contaminants back to the lubrication points, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Periodically use a radiator cleaner to flush the radiator. Removing rust and scale deposits not only ensures proper engine operation but also extends the overall lifespan of the radiator and engine.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.