Can the Sylphy handle long-distance highway driving?

1 Answers
JasonAnn
07/30/25 2:26am
The Sylphy is capable of long-distance highway driving with good stability. Taking the 2021 Sylphy Luxury Edition as an example, its body dimensions are: 4631mm in length, 1760mm in width, and 1503mm in height, with a wheelbase of 2700mm. It has a fuel tank capacity of 50 liters and a trunk capacity of 510 liters. The 2021 Sylphy Luxury Edition features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 122PS, a maximum power of 90kW, and a maximum torque of 155Nm, paired with a 5-speed manual transmission.
Was this review help?
18
0
Share
More Forum Discussions

What is the reason for the continuous flashing of the handbrake light?

The reasons for the continuous flashing of the handbrake light are: 1. The handbrake is pulled up or the handbrake switch has poor contact, causing the light to flash. If the handbrake is pulled up, the handbrake light will keep flashing; release the handbrake to resolve this. If the handbrake switch has poor contact, the switch needs to be repaired. 2. Poor contact in the handbrake light's power wire or a broken wire harness requires repairing the handbrake light's power wire. Precautions for the handbrake light: 1. Engage the handbrake when parking on a slope for an extended period. 2. Do not pull the handbrake while driving at high speed. Pulling the handbrake directly during high-speed driving is very dangerous. The handbrake typically acts on the rear wheels; pulling it directly can cause the rear wheels to lock, leading to skidding or even a rollover.
6
1
Share

Why is there no sound from the central control screen?

The reasons for no sound from the central control screen include: connection issues between the camera and the central control screen, camera malfunction, or problems with the central control screen itself. Related introduction to car central control screens: 1. Definition: A full-touch central control screen refers to a car's dashboard that no longer uses traditional physical button or knob designs, but instead employs capacitive touch technology. Similar to smartphone screens, it responds to light touches, presses, or swipes. 2. Advantages: Full-touch central control screens not only significantly enhance the vehicle's technological and premium feel but also add a highlight to the car's otherwise less avant-garde interior design.
13
3
Share

Is Washing the Car at Noon Harmful to the Paint?

Washing the car at noon can damage the paint. After being exposed to the midday sun, the car's paint surface becomes very hot. When cold water comes into contact with the hot paint surface, the temperature difference can make the paint brittle and prone to cracking. Precautions for car washing: 1. Avoid using hard water: Do not use anything other than soft water for washing, including hot water, alkaline water, or water with high hardness. These substances can damage the paint. Washing with hard water can leave marks and a film on the car's surface after drying. 2. Avoid using high-pressure water streams: Excessive water pressure can harm the car's paint. If there is stubborn dirt or mud on the car, soak it with water first before rinsing. Use a dispersed water stream for spraying.
9
0
Share

What are the methods to identify a car's production date?

There are several methods to identify a car's production date: 1. Check the vehicle's factory nameplate. Every car has a nameplate embedded on it when it leaves the factory. 2. Look at the black characters in the lower right corner of the front windshield, which include the production date. 3. The production date can also be checked through the car tires. The production date on the original tires is the same as the car's production date. The vehicle identification number (VIN) also contains the production date, along with information such as the manufacturer, model year, vehicle type, body style, engine code, and assembly location. The VIN consists of three parts: the first part is the World Manufacturer Identifier (WMI), the second part is the Vehicle Descriptor Section (VDS), and the third part is the Vehicle Identifier Section (VIS).
5
5
Share

What is the method for replacing the brake light on the Changan CS35?

The method for replacing the brake light on the Changan CS35 is as follows: 1. Remove the protective panel: The brake light switch is located above the brake pedal, with a spring contact pressing against the brake pedal linkage. 2. Disconnect the wiring: After removing the protective panel, the brake light switch can be seen above the brake pedal. 3. Remove the switch: This switch is of a rotating latch type and cannot be pulled out by force. 4. Install the switch: Insert the head of the switch into the latch hole. 5. Reinstall the protective panel. The Changan CS35 brake light is installed at the rear of the vehicle and is primarily red in color to enhance the penetration of the light source. This ensures that vehicles behind can easily detect when the front vehicle brakes, even in low visibility conditions, thereby helping to prevent rear-end collisions.
2
1
Share

Does the vehicle need to be driven on-site for ownership transfer?

Yes, the vehicle needs to be driven on-site for ownership transfer. Article 19, Paragraph 1 of the Motor Vehicle Registration Regulations stipulates: For applying for transfer registration, the current owner of the motor vehicle shall fill out an application form, submit the vehicle for inspection, and provide relevant certificates and documents. When processing the ownership transfer registration, i.e., transfer registration, the motor vehicle must be submitted for inspection. Since the vehicle needs to be submitted for inspection, it must be driven to the vehicle management office. The vehicle transfer process includes: 1. Issue a transaction invoice and pay the used car transaction tax; 2. Vehicle inspection: drive the vehicle to the inspection site for external inspection; 3. License plate selection: take a number from the number dispenser and queue up with relevant materials to pay the transfer fees; 4. Transfer and relocation: required materials include the Motor Vehicle Registration, Transfer, and Cancellation Form, Transfer Application Form, Inspection Record Form, original motor vehicle property registration certificate, original driving license, original owner's ID card, original license plate number, vehicle photos, and the transfer invoice from the trading market.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.