Can the Sylphy be used for Didi?

Is it necessary to add fuel additive to the car fuel tank?

It is not necessary to add fuel additive to the car fuel tank, and car owners can choose whether to add it based on their specific situation. Here is an introduction to fuel additives: 1. The function of fuel additives: Adding fuel additive (cleaning type) to the car can effectively remove carbon deposits in the engine by attaching to the pores of the carbon deposits and then decomposing and eliminating them. Especially for turbocharged engines, long-term use can accumulate a lot of carbon deposits, and at this time, it is necessary to add this type of cleaning fuel additive. 2. The disadvantages of fuel additives: Long-term use can easily clog the three-way catalytic converter, especially for new cars. Since the fuel at gas stations already contains additive components, and new cars do not produce excessive carbon deposits, it is unnecessary to add too much fuel additive.

4

3

Share

Failed the Driving Test Subject Two Twice, What to Do for the Third Time?

Keep a calm mindset and practice well. The key to passing the Driving Test Subject Two is to practice more and master the skills. Here are more tips for the Driving Test Subject Two: 1. Keep the speed slow: Try to drive as slowly as possible without stopping, as slower speed allows more time for adjustments. 2. Adjust the rearview mirrors properly: After getting in the car, make sure to adjust the rearview mirrors correctly, which is especially important for reverse parking and parallel parking. Generally, the rearview mirrors should be set lower than usual, with the rear door handles aligned to the top edge of the mirrors to see the ground markings clearly. 3. Master the 'three-point alignment' method: The three points refer to the driver's eyes, a reference point on the car, and a reference point on the ground. During Subject Two operations, it's crucial to identify these points accurately and observe carefully to ensure precise execution. 4. Pay attention to the car's four corners: The front corner of the car tends to cross the outer line during reverse parking, while the rear corner may cross the side lines of the parking space. The front corner may go out of line during curve driving, and the front corner may also go out of line during right-angle turns. During parallel parking, the front corner may cross the outer line or the left front corner of the parking space, while the right rear corner may cross the right parking line. Therefore, always be mindful of the four corners and the outer lines. 5. Understand the key points of each test item: (1) For reverse parking, the key is to know how to correct the direction if entering the parking space too early. (2) For parallel parking, the key is the third steering action (right-left-left), specifically knowing when to make the final left turn based on the reference point inside the car. (3) For hill start and stop, the key is to prevent stalling. (4) For curve driving, the key is to avoid touching the inner protruding areas of the curve by combining reference points for steering with fine adjustments. (5) For right-angle turns, the key is maintaining the correct distance from the outer line before turning, avoiding being too wide, too narrow, or having the car at an angle.

20

2

Share

Is it okay to drive a car continuously for 20 hours on the highway?

No problem. Here are the details: 1. Specific analysis: Under normal road conditions, a typical family sedan can run until the fuel in the tank is exhausted when driving at a speed of 100 kilometers per hour. If the premise is that there is an unlimited supply of fuel and the car continues to drive non-stop at 100 kilometers per hour, it can travel approximately 100,000 kilometers. Therefore, a car can indeed run continuously for 20 hours on the highway. 2. Precautions: Driving continuously for 20 hours on the highway may increase the wear and tear on car parts. More importantly, it is advisable to have at least three drivers to share the driving.

2

1

Share

Is it necessary to rotate the front and rear tires of a car?

Rotating the front and rear tires of a car is highly necessary. Tire rotation helps prevent uneven wear over time, extends the overall service life of the tires, and ensures driving safety. The reasons why cars need front and rear tire rotation are as follows: 1. The tires installed on a car are divided into drive wheels and non-drive wheels, which bear different forces, resulting in different wear patterns. Additionally, due to the car's left and right turns, the wear on the left and right tires also differs. 2. If the front and rear tires are not rotated regularly, after prolonged driving over long distances, the phenomenon of asynchronous and uneven wear among the four tires will become increasingly severe. This not only leads to different service lives for the four tires but also reduces the stability of the car's handling, thereby affecting safe driving.

12

0

Share

What are the effects of a faulty clutch master cylinder?

A faulty clutch master cylinder can lead to oil leakage. Here are the related details: 1. Oil leakage: A faulty clutch master cylinder can cause incomplete gear engagement, resulting in oil leakage. 2. Inability to engage gears: When pressing the clutch, there will be no resistance, making it feel light. With a faulty clutch master cylinder, you won't feel the usual resistance when pressing the clutch, and in severe cases, you may not be able to engage gears. 3. Increased oil pressure: The push rod moves the master cylinder piston, increasing oil pressure, which is transmitted through the hose to the slave cylinder, forcing the slave cylinder rod to push the release fork and move the release bearing forward. When the driver releases the clutch pedal, the hydraulic pressure is relieved, and the release fork gradually returns to its original position under the action of the return spring, putting the clutch back into the engaged state.

18

4

Share

How Many Kilometers for BMW's First Maintenance?

BMW 5 Series first maintenance is at 10,000 kilometers or 12 months. Precautions for the first maintenance include: 1. Make an appointment in advance; 2. Bring essential items such as the maintenance manual and vehicle registration; 3. Record any faults or questions encountered during daily driving and inform the staff during the first maintenance registration. First maintenance items for the car include: 1. Replace engine oil, oil filter, clean the air filter, and check if the generator belt and wiper blades are damaged; 2. Check if the levels of various fluids are normal; 3. Check if the tire pressure is normal and if there is any uneven wear, bulging, or damage; 4. Inspect the car chassis, including brake pads, brake discs, connecting rods, ball joints, and CV joints for any scratches; 5. Check if all switches and lights are working properly.

9

5

Share

Can the Sylphy be used for Didi?

Is it necessary to add fuel additive to the car fuel tank?

Failed the Driving Test Subject Two Twice, What to Do for the Third Time?

Is it okay to drive a car continuously for 20 hours on the highway?

Is it necessary to rotate the front and rear tires of a car?

What are the effects of a faulty clutch master cylinder?

How Many Kilometers for BMW's First Maintenance?

Where Can I Get a Replacement Car Key If I Lose Mine?

How to Check if a Vehicle Meets China VI Emission Standards?

How to Identify a Vehicle's Emission Standard?

Is It Legal for the License Plate Screw Caps to Not Match the License Plate?