Can the steering wheel of Chery Ant be adjusted up and down?

2 Answers
Stevie
07/28/25 4:55pm
Chery Ant steering wheel can be adjusted up and down. The function of steering wheel adjustment: Up and down adjustment of the steering wheel should be the most basic steering wheel adjustment. In addition, some models also have front and rear adjustment. The up and down adjustment of the steering wheel is designed to accommodate different drivers, allowing them to find a comfortable driving position with good visibility and ensuring that the driver's arms and legs maintain an appropriate distance from the steering wheel. After adjustment, the steering wheel should be aligned directly with the driver, which helps the airbag on the steering wheel to better protect the driver in the event of a collision. How to adjust the steering wheel: There is a small lever right below the steering wheel. Before adjusting, the driver must first adjust the seat height and backrest angle. After pulling the small lever, the steering wheel can be adjusted up and down. Find a suitable position where the steering wheel does not interfere with leg movement and allows comfortable arm movement to turn the wheel. Finally, return the lever to its original position.
Was this review help?
11
5
Share
SaraDella
08/11/25 11:29pm
When I first bought the Chery Ant, I was also curious about this issue. I checked the manual and even went to the 4S store to try it out—none of the models have a steering wheel height adjustment function. This car is designed for urban commuting, so the steering wheel angle is fixed. However, the seat adjustment range is quite large; even at my height of 1.8 meters, I don’t feel cramped. I recommend taking some time to adjust the seat and backrest angle before driving. This way, even if the steering wheel can’t be adjusted for height, you can still find a comfortable driving position. If you’re still concerned, you can test-drive it to experience the actual seating posture, as everyone’s height and proportions differ.
Was this review help?
7
3
Share
Expand All
More Forum Discussions

What is the method for testing cylinder compression pressure?

Testing cylinder compression pressure can be done through the following methods: 1. Using a cylinder pressure gauge; 2. Using a cylinder pressure tester. Below are the detailed steps for testing with a cylinder pressure gauge: 1. Start the engine and let it run until the coolant temperature reaches approximately 80°C, then stop; 2. Use compressed air to clean dust around the spark plugs, remove all spark plugs, and open the throttle and choke; 3. Clear exhaust gases from the cylinder, place the rubber tip of the pressure gauge on the first cylinder's spark plug hole, and press firmly; 4. Rapidly crank the engine using the starter or hand crank at about 180 rpm, record the pressure gauge reading, repeat the test 2-3 times, then proceed to measure the remaining cylinders in sequence; 5. If cylinder pressure is below standard, add 20-30g of fresh engine oil to the piston top and retest. If pressure increases significantly, it indicates piston ring wear. If pressure remains unchanged, it suggests valve or gasket leakage.
2
0
Share

Are out-of-town license plates subject to traffic restrictions in Beijing?

Out-of-town license plates are subject to traffic restrictions in Beijing, which mainly fall into two categories: 1. Out-of-town passenger vehicles: mainly including ordinary private cars, buses, minibuses, and vans; 2. Out-of-town cargo vehicles: including blue-plate trucks, yellow-plate trucks, enclosed small trucks, and pickup trucks. The relevant penalty regulations for Beijing's traffic restrictions are as follows: 1. Violating the tail number restriction rules for motor vehicles will result in a fine; 2. Out-of-town motor vehicles without a Beijing entry permit entering roads within the Sixth Ring Road (excluding) will be fined and receive 3 penalty points; 3. Out-of-town trucks with a Beijing entry permit entering roads within the Sixth Ring Road (including) between 6:00 and 24:00 will be fined and receive 3 penalty points; 4. Local cargo vehicles, yellow-label vehicles, and yellow-label vehicles from other provinces, autonomous regions, or municipalities entering restricted areas will also be fined and receive 3 penalty points.
15
0
Share

Should You Release the Handbrake Before Shifting Gears in an Automatic Car?

For an automatic car, you should shift gears first and then release the handbrake. The specific steps are as follows: 1. Press the brake pedal firmly in an automatic car; 2. Then shift to D gear and release the handbrake; 3. After releasing the brake, you can drive normally. Below is some relevant information about the handbrake: 1. The handbrake is professionally referred to as an auxiliary brake. Its principle differs from that of the main brake, as it uses a steel cable connected to the rear brake shoes to brake the car. Long-term use of the handbrake can cause the steel cable to undergo plastic deformation. Since this deformation is irreversible, prolonged use will reduce its effectiveness, and the handbrake's travel distance will increase. 2. A return spring is used in conjunction with the handbrake. When the handbrake is engaged, the spring is stretched; when the handbrake is released, the spring returns to its original length. Long-term use of the handbrake can also cause corresponding deformation in the spring.
13
0
Share

What are the hazards of dampness in underground garages to cars?

Dampness in underground garages can breed many bacteria and accelerate the aging of car paint. Especially after summer rains, due to factors such as temperature and the lack of sunlight in underground garages, various invisible bacteria can proliferate inside the vehicle. If parked for a long time, the chassis may be eroded, metal oxidation speeds up, leading to an increased failure rate of chassis components. Methods to improve dampness in underground garages: 1. Regulate temperature differences: The main methods include using geothermal energy to raise the ground temperature of the underground garage, thereby promoting the evaporation of air humidity and alleviating dampness. Another approach is to promptly block air exchange between the underground garage and the outside environment to prevent external moisture from entering. 2. Use desiccants in time: Different moisture-proof methods can be employed in different seasons. For instance, in seasons with less severe humidity, desiccants can be used to keep the underground garage dry and hygienic. 3. Install drainage channels: If the dampness is caused by groundwater, timely installation of drainage channels or sewers can effectively divert groundwater and improve the damp conditions in the underground garage.
4
4
Share

Is Constructive Total Loss Advantageous for Car Owners?

It is neither fair nor reasonable for car owners. Here are the relevant explanations: 1. Constructive Total Loss: This refers to a situation where actual total loss is unavoidable, or when the residual value of the damaged vehicle plus the costs of rescue, arrangement, and repair exceed its actual value, it is deemed as a total loss. Constructive total loss is the opposite of actual total loss. Although the insured vehicle is not completely destroyed and can be repaired, the cost of repair would exceed the actual value of the rescued insured vehicle, making it not worth the effort. 2. Factors: Constructive total loss is not a real total loss, as the damaged car can be repaired. Considering frugality and emotional attachment to the old car, even though the repair cost of the damaged car is higher than the actual value calculated based on depreciation, the owner may still want to repair and continue using it. If the general total loss procedure is followed, where the insurance company deducts the residual value or takes back the damaged car, it is neither fair nor reasonable for the car owner.
12
1
Share

How to Turn on the Headlights of a Volkswagen Golf?

The method to turn on the headlights of a Volkswagen Golf is to rotate the lighting assembly on the left side of the steering wheel to activate the low beams, then toggle the combination switch to turn on the headlights. Car headlights, also known as car front lights or LED daytime running lights, serve as the 'eyes' of a vehicle. They not only contribute to the owner's external image but are also crucial for safe driving at night or in adverse weather conditions. Below is an introduction to the classification of car lights: 1. Headlights - Combined headlights are located at the front of the car, primarily serving illumination and signaling purposes. The light emitted by headlights illuminates the road ahead, enabling safe driving at night. 2. Taillights - Combined taillights are positioned at the rear of the car, mainly functioning for illumination and signaling. 3. Turn signals - These lights indicate left or right turns to other road users and are required by regulations to be amber. 4. License plate lights - These lights primarily illuminate the license plate, allowing people to identify the vehicle's license plate in the dark.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.