Can the Shadow Leopard be equipped with a rear wing?

3 Answers
KendraRose
07/29/25 12:49pm
Shadow Leopard can be equipped with a rear wing. Advantages of installing a rear wing: It can improve driving stability. In addition to its aesthetic function, the main purpose of installing a rear wing is to provide necessary stability for the vehicle at high speeds. Especially for high-power vehicles, the rear wing can play a certain balancing role when cornering at high speeds or passing through complex road sections. Disadvantages of installing a rear wing: The fewer protrusions on the car's surface and the smoother the lines, the lower the wind resistance. The added rear wing will undoubtedly increase wind resistance. Since most sedans mainly drive on urban roads, the vehicle cannot reach the speed at which the rear wing can function effectively. The larger the wing, the greater the low-speed resistance, and the increase in the overall weight of the body will inevitably lead to higher fuel consumption. Precautions for installing a car rear wing: The height of the rear wing should be appropriate, and the size should be moderate. It should not extend beyond the trunk. Apart from poor appearance, it is also not allowed by road traffic safety laws. Of course, it should not be too small either, as a too-small wing can only serve as a decoration. Generally, the gap between the main wing and the body should be less than 2cm.
Was this review help?
4
3
Share
CaliFitz
08/14/25 1:19am
I just installed a spoiler on my Emgrand, feels awesome. You can buy the modification kit online or at auto parts stores, the kind that uses self-tapping screws for installation. When installing, choose the right spot on the rear cover to drill holes, otherwise it might leak into the trunk. The Emgrand itself has a streamlined design, adding a small spoiler makes it look more sporty, but be careful not to go too overboard to avoid affecting the car's balance. For DIY, prepare tools like an electric drill and a level, precise measurements can save you trouble. By the way, ABS plastic material is cheap and durable, costing just a few hundred bucks, and your car will instantly look cooler. Remember to regularly check the mounting points to prevent them from loosening at high speeds and causing danger. Modding cars is all about fun, but don't compromise safety.
Was this review help?
10
2
Share
Expand All
LeCamilla
10/09/25 6:05am
Regarding the installation of a rear wing on the Emgrand GT, I recommend prioritizing compliance. In China, vehicle modifications require filing with the vehicle management office, otherwise, you may face fines and penalty points if caught. As a sports sedan, adding a rear wing to the Emgrand GT falls under exterior modifications, but since it's not an original factory configuration, it's important to check the vehicle's structure before installation to avoid affecting components like brake lights. In terms of materials, carbon fiber is lightweight but expensive, while plastic is more affordable. After installation, it's best to have the vehicle inspected at a professional shop to ensure the body's integrity isn't compromised. By the way, some cities have strict regulations on modifications, and the filing process may require providing modification invoices and inspection reports. Taking the time to go through the process can help avoid trouble, as driving safety should always come first.
Was this review help?
8
4
Share
Expand All
More Forum Discussions

How to adjust the brakes of a sedan?

The method to adjust the brakes of a sedan is: by adjusting the nut below the pedal. The brake, also known as the braking system, refers to the action of stopping or reducing the speed of moving locomotives, vehicles, and other transportation tools or machinery. Its working principle is: fixing a wheel or disc on the high-speed shaft of the machine, installing corresponding brake shoes, belts, or discs on the machine base, and generating braking torque under external force. The method to replace car brake pads is: 1. Lift the car and remove the tire; 2. Unscrew the fixing screws on the brake caliper and remove the brake caliper; 3. Remove the old brake pads and push back the brake caliper piston; 4. Clean the installation bracket of the brake disc and install the new brake pads.
18
4
Share

Why Will Insurance Companies Deny Claims for Secondary Ignition?

Damage to the vehicle caused by human factors is not covered by insurance. Below is relevant information about secondary ignition: 1. Introduction: During water wading, if water blocks the air intake, causing the vehicle to stall, attempting to restart the engine is referred to as secondary ignition. 2. Precautions: It's important to note that even if the water on the road has receded, you should avoid attempting to restart the engine. This is because there may still be water in the intake pipe, and the electrical system may also malfunction after being submerged. It's best to contact a towing company. Do not try to save on towing fees at the risk of greater losses. When arranging for towing, clearly communicate to the staff that the vehicle stalled during water wading. For easier towing, the towing company may shift the gear to neutral. Without understanding the situation, they might attempt to start the engine, so it's crucial to explain the circumstances clearly.
15
4
Share

Can You Choose Not to Proceed on a Green Light During Driving Test (Subject 3)?

You can choose not to proceed on a green light during the Subject 3 driving test, and stopping to wait for the next green light will not result in point deductions. Below is a detailed introduction to Subject 3: 1. Road driving skills test for Subject 3: The content generally includes: preparation before driving, simulated lighting test, starting, driving in a straight line, gear shifting operations, changing lanes, pulling over, proceeding straight through intersections, turning left at intersections, turning right at intersections, crossing pedestrian crossings, passing through school zones, passing through bus stops, meeting oncoming vehicles, overtaking, making U-turns, and nighttime driving. 2. Safe and civilized driving knowledge test for Subject 3: The content generally includes: requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge.
8
0
Share

What Causes Excessive Noise in Sedans?

The reasons for excessive noise in sedans are: 1. Carbon buildup in the engine; 2. Shock absorber failure; 3. Spark plug carbon buildup; 4. Tire aging; 5. Internal damage to the valve guide; 6. Cooling system failure; 7. Poor quality engine oil; 8. Engine misfire; 9. Large gaps in the cabin or vehicle body. Solutions for excessive car noise include: 1. Applying sound-absorbing foam material under the engine hood; 2. Installing sound-absorbing cotton material in the trunk, at the bottom of the trunk, and on the wheel arches on both sides of the trunk; 3. Installing professional damping plates in areas prone to noise; 4. Adding sealing strips inside the doors; 5. Replacing tires.
19
5
Share

Why is there noise when the car window glass is raised or lowered?

The reasons for noise when the car window glass is raised or lowered are: 1. Loose fastening screws or window regulator brackets inside the window glass; 2. Aging of the window glass sealing strip; 3. Debris in the window glass guide rail. Car windows are an important part of the entire vehicle body, designed to meet the needs of interior lighting, ventilation, and the visibility of drivers and passengers. They are divided into front and rear windshields, ventilation windows, heat-insulating side windows, and sunroofs. The solutions for abnormal noise when raising or lowering car window glass are: 1. Tighten the loose door glass at a professional repair shop; 2. Replace the window glass sealing strip; 3. Clean debris from the guide rails.
1
0
Share

What brand is Venucia?

Venucia is a domestic independent automotive brand under Dongfeng Motor Corporation. Taking the 2020 Venucia Star as an example, its body dimensions are: length 4691mm, width 1905mm, height 1694mm, with a wheelbase of 2756mm, minimum ground clearance of 192mm, and a fuel tank capacity of 60 liters. The 2020 Venucia Star is equipped with a 1.5T turbocharged engine, delivering a maximum power of 140kW and a maximum torque of 260Nm, paired with a 6-speed manual transmission. It features a front MacPherson independent suspension and a rear multi-link independent suspension.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.