Can the Roewe 360 be equipped with a navigation system?

2 Answers
Elias
07/25/25 5:06am
The Roewe 360 can be equipped with a navigation system. The installation steps for the in-car navigation are as follows: 1. Before installation: First, install the GPS antenna of the navigation system. From the passenger seat position, place the antenna inside the dashboard, standing upright, and connect it to the navigation system. After connection, secure the long wire with tape, then screw in the screws and snap the interior panel back into place. 2. During installation: First, use a T20 tool to remove the four screws on the CD player. Be careful not to let the screws fall into the car. After removing the screws, gently pull out the CD player. There are two plugs at the back; release the clips to separate the wiring harness from the CD player.
Was this review help?
7
2
Share
LeDylan
08/10/25 5:37pm
Answer 1
Was this review help?
9
4
Share
Expand All
More Forum Discussions

How to set the ambient lighting for Cadillac XT4?

The method to set the ambient lighting for Cadillac XT4 is that the lights will turn on when the voice reaches a specified decibel level. The XT4 ambient lighting uses a voice-activated switch function, and the lighting positions are relatively concealed, mainly located at the front footwells, door edges, center control knob, and the extension of the instrument panel. The ambient lighting is a type of LED light, which can change the monotonous state of the car at night, reduce visual fatigue, and improve the riding experience for passengers. The Cadillac XT4 is a compact luxury SUV under the Cadillac brand, with a body length, width, and height of 4600mm, 1881mm, and 1627mm respectively, and a wheelbase of 2779mm.
12
3
Share

How is autonomous driving achieved?

Autonomous driving is achieved through various sensors and computers, where sensors perceive the surrounding environment, and the computer system interprets the sensor information to identify appropriate navigation paths, obstacles, and relevant signs. Autonomous vehicles, also known as driverless cars, computer-driven cars, or wheeled mobile robots, are vehicles capable of sensing their environment and moving with little or no human input. Currently, most cars with autonomous driving capabilities are at Level 2 (L2) autonomy, which refers to partial automation where the system can control both steering and acceleration. The highest level of autonomous driving is Level 5 (L5), representing full automation where the driver can even sleep in the driver's seat.
4
3
Share

Is Baojun a car under Wuling?

Baojun is a car under Wuling. Baojun is an independent automotive brand created by SAIC-GM-Wuling. The Baojun lineup includes models such as the Baojun 630, Baojun 610, Baojun 510, Baojun 530, Baojun 730, Baojun 360, Baojun 310, Baojun 310W, Baojun E100, and Baojun E200. Taking the Baojun 630 as an example, its body dimensions are 4597mm in length, 1736mm in width, and 1462mm in height, with a wheelbase of 2640mm. The Baojun 630 features a stylish and elegant exterior, smooth and natural body lines, a stable overall shape, a simple and generous interior, and fine craftsmanship.
12
0
Share

How to Tell How Many Pistons a Brake Caliper Has

The method to determine how many pistons a brake caliper has is to look for the number of circular protrusions on the caliper. Each protrusion represents a piston, and the total number of pistons can be calculated by multiplying the number of protrusions on one side by two. Piston calipers are part of the automotive braking system and belong to a type of disc brake. The piston caliper is the device that pushes the friction pads against the brake disc. Generally, the number of piston calipers indicates the number of friction pads. More friction pads mean a larger friction area, and a larger friction area results in greater friction between the pads and the brake disc. It's important to note that pistons are equivalent to friction pads, so more pistons indicate better braking performance due to increased friction.
20
2
Share

How to Turn On the Ambient Lighting in a Land Rover Range Rover?

To activate the ambient lighting in a Land Rover Range Rover, start the vehicle and navigate to the 'Ambient Lighting' option on the central control screen. Tap to turn it on, and you'll have access to 10 selectable colors. As the name suggests, ambient lighting enhances the cabin atmosphere—it's not designed for illumination but rather to create a specific mood. Different lighting tones can evoke varied emotions for both drivers and passengers. The Land Rover Range Rover measures 4999mm in length, 2073mm in width, and 1835mm in height, with a wheelbase of 2922mm. It offers a comfortable driving position with excellent visibility, ensuring clear views from all corners. Both seats and steering wheel feature electric multi-directional adjustments, allowing significant posture variations to suit virtually any body type.
15
2
Share

How to adjust the time on the Accord dashboard?

The method to adjust the time on the Accord dashboard is: 1. Locate the sound button on the air conditioning control panel, press it, and the time on the dashboard will blink; 2. Press the 4 button to adjust the hour, and press the 5 button to adjust the minutes; 3. After adjusting to the correct time, press the sound button again to confirm. The Accord has a body length, width, and height of 4893mm, 1862mm, and 1449mm respectively, with a wheelbase of 2830mm. Its body lines are clean and smooth, and the overall design combines stylish dynamism and dignified elegance. It features an LED high-mounted brake light commonly used in luxury models and an elegant triangular combination taillight, creating a simple and clear impression together with the unique wide license plate panel, exuding a sense of grandeur and stability.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.