Can the rightmost straight lane turn right?

3 Answers
JakeAnn
07/29/25 7:41am
The rightmost straight lane cannot turn right. Motor vehicles should drive according to the lanes marked by the road markings. Specific laws and regulations: According to road conditions and traffic needs, roads are divided into motor vehicle lanes, non-motor vehicle lanes, and pedestrian lanes. Motor vehicles, non-motor vehicles, and pedestrians should travel in their respective lanes. If there are no divided motor vehicle lanes, non-motor vehicle lanes, or pedestrian lanes, motor vehicles should travel in the middle of the road, while non-motor vehicles and pedestrians should travel on both sides of the road. Precautions when driving through intersections: When passing through intersections, motor vehicles should follow the instructions of traffic lights, traffic signs, road markings, or traffic police. When passing through intersections without traffic lights, traffic signs, road markings, or traffic police directing traffic, drivers should slow down and yield to pedestrians and vehicles with the right of way.
Was this review help?
19
3
Share
DiClaire
08/13/25 1:52am
This is actually a pretty common issue, and I've experienced something similar myself. That time I was driving in the city, the rightmost lane was marked for going straight, but I was in a hurry to make a right turn. As a result, I got fined after turning. Later I realized that a straight-only lane means you must go forward and can't just turn right unless there's a right-turn arrow on the road or signs explicitly permitting it. My suggestion is to pay more attention to road markings while driving - like where the arrows point, or check if there are any special instructions at intersections. If you're not sure, it's better to change to the right-turn lane in advance rather than trying to turn directly from the straight lane for convenience. Safety first - this way you avoid accidents and getting pulled over by police. After driving for years, I've learned to carefully observe every detail to avoid fines or collisions.
Was this review help?
13
5
Share
Expand All
AddysonRose
10/04/25 8:29am
I remember chatting with a friend who complained about getting ticketed for making a right turn from a straight-only lane at a highway exit. Honestly, that kind of maneuver is totally unacceptable! The rightmost straight lane is designed for going straight – turning right there is a violation that easily leads to tickets or accidents. My usual driving habit is to carefully observe lane markings: go straight if the arrow points straight, only turn right if there's a right-turn arrow. Some places have confusing signage, so extra caution is needed. Don't listen to people who suggest exploiting loopholes – safe driving is what matters most. Develop good habits: slow down at every intersection to confirm the markings, taking responsibility for yourself and other drivers.
Was this review help?
3
0
Share
Expand All
More Forum Discussions

Will the large gap between the headlight and bumper cause water ingress?

Car headlights and bumper gaps will not cause water ingress. The gap between the car headlight and bumper is an installation clearance, and generally, water will not enter the headlight to cause fogging or water accumulation inside the lamp cavity. However, if the gap is too large, it may affect the vehicle's aesthetics, so it is recommended to go to a 4S shop or repair shop for adjustment as soon as possible. The following is an introduction to car headlights and bumpers: 1. Car headlights: Car headlights, also known as car front lights or car LED daytime running lights, serve as the eyes of the car. They not only relate to the owner's external image but are also closely linked to safe driving at night or in bad weather conditions. The use and maintenance of car lights should not be overlooked. 2. Bumper: The bumper is located in most areas at the front and rear of the car, and its functions are as follows: From a safety perspective, it can act as a buffer during low-speed collisions, protecting the front and rear body of the car; in accidents involving pedestrians, it can provide some protection for pedestrians. From an aesthetic perspective, it is decorative and an important component in decorating the car; at the same time, the car bumper also has certain aerodynamic effects.
13
4
Share

How to use the gear shift +- of the Envision?

The Envision is equipped with a manual-automatic gear shift. While driving, you can switch to manual mode by pressing +- to manually shift gears up or down. The instructions for using the Envision's gear positions are as follows: 1. P (Parking Gear): When entering this gear, the transmission locking mechanism activates, so it should only be engaged after the vehicle has come to a complete stop. 2. R (Reverse Gear): This gear is used for reversing. It can only be engaged after coming to a complete stop by pressing the brake while reversing; it cannot be engaged while the vehicle is moving. 3. N (Neutral Gear): The transmission is in neutral (idle gear), meaning no power is transmitted to the wheels, and the engine's braking effect cannot be utilized. 4. D (Drive Gear): One of the most commonly used forward gears, where the transmission automatically shifts gears.
10
0
Share

How to set the horn sound when locking the Volkswagen Bora?

The Bora does not have the horn sound enabled by default when locking the car. You need to visit a 4S dealership to update the data (via the OBD vehicle system to modify the settings). After enabling this feature, when you hear the horn sound upon locking the car, you can be assured that the doors are securely locked. Additional information: Below is an introduction to the horn function: 1. Meaning and Purpose: The horn is the audio signal device of a car. During driving, the driver can emit necessary audio signals as required or regulated to warn pedestrians and alert other vehicles, ensuring traffic safety. It is also used for urging movement and transmitting signals. 2. Working Principle: When the horn button on the steering wheel or other locations is pressed, current from the battery flows through the circuit to the electromagnetic coil of the horn relay. The electromagnetic coil attracts the moving contact switch of the relay to close, allowing current to flow to the horn. The current activates the electromagnet inside the horn, causing the diaphragm to vibrate and produce sound.
7
3
Share

How thick is the sidewall of a car tire?

Generally, the sidewall of a car tire is about 6mm thick, while the tread thickness is around 13mm (with a tread pattern depth of 7mm and a tread thickness of 6mm). The sidewall thickness is 5mm. Due to different aspect ratios, the thickness of the sidewall varies among different car models and tire specifications. Below is some relevant information about tires: 1. Benefits of increasing the rubber thickness of the sidewall: It can reduce the puncture rate, enhance tire strength, and help improve vibration damping performance. 2. Drawbacks of increasing the rubber thickness of the sidewall: It may reduce handling performance, increase tire manufacturing costs, add to the overall vehicle weight, and consequently increase fuel consumption.
18
5
Share

Which company owns the Ford brand?

Ford is a world-renowned automobile brand and one of the many brands under the American Ford Motor Company (Ford-Motor-Company). The American Ford Motor Company owns eight world-famous automobile brands: Ford, Lincoln, Mercury, Mazda, Aston Martin, Land Rover, Jaguar, and Volvo. Additional information: 1. The Ford logo features the word 'Ford' in white letters on a blue background. Since the founder, Henry Ford, liked small animals, the designer of the logo drew the English word 'Ford' to resemble a small white rabbit. 2. Ford Motor Company is one of the largest automobile manufacturers in the world. Founded in the early 20th century, Ford Motor Company, driven by founder Henry Ford's dream of 'building a car affordable for everyone' and his exceptional vision, has weathered a century of challenges to become one of the world's top four automobile group companies.
16
0
Share

What is the Audi Black Optics Package?

Black Optics Package is a glossy black modification accessory set from Audi. Here are the details about the Audi Black Optics Package: 1. Included accessories: The Black Optics Package includes accessories such as the grille, grille emblem, rear emblem, front splitter, front lip, rear diffuser, grille trim frame, door handle trim strips, window trim strips, and other parts. 2. Difference from other accessories: The Black Optics Package is an OEM blackened accessory kit. For example, if you choose the Black Optics Package for parts like the radiator grille, window aluminum trim, or roof, these components will all be in glossy black.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.