Can the reversing camera be installed by yourself?

How to reset after replacing brake pads on BMW X1?

BMW X1 brake pad replacement reset steps: 1. Close the door and turn on the ignition. 2. Press and hold the black button at the lower left corner of the instrument panel until the oil or brake pad indicator appears. 3. When a triangle symbol appears in the middle, do not release the button. 4. When the brake pad indicator appears, release the button and press it again for a long time, it will display RESET or reset! At this time, release and press it again for a long time to complete the reset. Here is some information about brake pads: 1. Brake pads (brake lining) are generally composed of steel plates, friction blocks and adhesive heat insulation layers. The steel plates must undergo anti-rust treatment, and this process usually uses SMT-4 furnace temperature tracking instrument to detect the temperature distribution to ensure the quality of the steel plates. 2. The heat insulation layer is made of non-heat-conducting materials, and the only purpose is to insulate heat. The friction block, composed of friction materials and adhesives, is squeezed against the brake disc or brake drum during braking to generate friction, thereby slowing down and stopping the vehicle.

7

1

Share

What to Do When the Front Shock Absorber of Baojun 730 Has Problems Going Over Bumps?

Solutions for front shock absorber issues in Baojun 730 when going over bumps: Remove the shock absorber and stand it upright, then clamp the lower connecting ring in a bench vise. Pull and press the shock absorber rod forcefully several times. There should be stable resistance during this process, with the resistance when pulling up (rebound) greater than when pressing down. If the resistance is unstable or absent, it may indicate insufficient oil inside the shock absorber or damaged valve components, requiring repair or part replacement. Below are relevant details: 1. Drive the car on rough roads for 10km and then stop. Touch the shock absorber housing by hand. If it is not hot enough, it means there is no resistance inside the shock absorber, and it is not working. At this point, add appropriate lubricating oil and test again. If the housing becomes hot, it indicates insufficient oil inside the shock absorber, and it should be refilled. Otherwise, the shock absorber is faulty. 2. Shock absorbers are wear-prone parts during vehicle use. The performance of the shock absorber directly affects the smoothness of the car's ride and the lifespan of other components. Therefore, it is essential to keep the shock absorber in good working condition to maximize your car's performance.

17

3

Share

Where is the air conditioning filter of Foton Mopack located?

Foton Mopack's air conditioning filter is installed at the air intake in the right rear corner of the engine compartment and can be cleaned or replaced separately. The air conditioning filter can adsorb moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., from the air, with strong and long-lasting moisture absorption. Below is some information about the Foton Mopack: 1. The front face design of the Foton Mopack is stable and neat, with a slightly wedge-shaped compact design that is quite appealing. The brightness of the front crystal diamond headlights has been increased threefold, meeting lighting needs under various road conditions and weather. 2. In terms of interior, the Mopack features newly designed seats and new material floor carpets across the entire lineup. These changes not only bring a fresh look to the vehicle but also enhance its overall grade. 3. The Foton Mopack has optimized seat dimensions based on passenger space, improving the ergonomics of the seats and thereby enhancing seating comfort. For the flooring, the fit between the carpet and the vehicle floor has been improved. Additionally, the carpets used are made of highly environmentally friendly materials, reducing odors inside the vehicle.

5

4

Share

What to Do If the First Maintenance Reaches 6000 Kilometers?

The service center will stamp the maintenance seal on it as proof of normal maintenance to avoid disputes over warranty coverage. Making an appointment for service is a good habit, as it can at least save you from waiting in line.

11

1

Share

What to do after completing the full-score education for driver's license?

After completing the full-score education, you need to take the exam on road traffic safety laws, regulations, and related knowledge. Those who pass the exam will have their demerit points cleared and their driver's license returned; those who fail will continue to participate in study and exams.

13

3

Share

What to Do When the Starter Gets Wet and Stops Responding?

Take it to a repair shop for servicing. Clean the accumulated water inside the engine. Assess the situation to determine the extent of cleaning required. Remove the intake pipe and intake manifold, then use compressed air to dry out the water inside.

1

4

Share

Can the reversing camera be installed by yourself?

How to reset after replacing brake pads on BMW X1?

What to Do When the Front Shock Absorber of Baojun 730 Has Problems Going Over Bumps?

Where is the air conditioning filter of Foton Mopack located?

What to Do If the First Maintenance Reaches 6000 Kilometers?

What to do after completing the full-score education for driver's license?

What to Do When the Starter Gets Wet and Stops Responding?

What to do if the motorcycle driver's license has been expired for more than three years?

Can an automatic parking system be retrofitted?

Where Does Automotive Network Data Come From?

How to Close the Car Sunroof?