Can the retake fee be paid on 12123?

How to Remove an Audi Door Handle?

Prepare the necessary tools for removing the door handle: a flat-head screwdriver and a T-20 Torx screwdriver. Open the car door, take out the flat-head screwdriver, and use it to pry off the small black cover. Take out the T-20 Torx screwdriver and use it to unscrew the bolt securing the lock cylinder. Store the removed bolt safely. Insert the flat-head screwdriver into the gap at the upper edge of the lock cylinder, pry out a small section, and then pull it out directly by hand.

1

0

Share

How to use the mirror heating function on Audi A6L?

After activating the rear window heating device, the mirrors will automatically turn on and heat up. The mirror heater activates with the rear window heater and automatically connects when the outside temperature is below 20°C. The mirrors heat according to external temperature. When the vehicle detects an external temperature below 20 degrees, it will automatically

5

4

Share

What to Do When the Envision Won't Start?

Simply turn the steering wheel forcefully while turning the key, and the steering wheel lock can usually be released quickly. Check if the battery has power. Failure to start may be due to a drained battery caused by leaving the headlights on for too long or the battery reaching the end of its lifespan. If the fuel gauge shows below the red line, the car naturally won't start. Also, pay attention to the quality of the fuel.

20

2

Share

How to Use the Audi Electronic Gear Shift?

When parking, press the P button on top of the gear lever to engage the parking gear. Pull the gear lever backward once, and the "D" light on the gear lever will illuminate. After shifting to D gear, the electronic gear lever automatically returns to its original position. First, press the unlock button on the left side of the gear lever and hold it down. Then, push the gear lever forward until "R" lights up. The paddle shifters behind the steering wheel—pulling the left and right paddles shifts up and down respectively.

20

1

Share

How to Reset the Electric Door of the Alphard?

Open the driver's side door of the GAC Toyota Alphard. Depress the brake pedal of the GAC Toyota Alphard to prepare for starting the engine. Press the one-touch start button of the GAC Toyota Alphard. Press the top of the lever located on the right side of the steering wheel of the GAC Toyota Alphard, hold it down without releasing, and continue holding for more than 5 seconds.

17

2

Share

Can the license plate of a used car be changed?

Used car license plates can be changed by directly applying for new plates at the vehicle management office. Below are specific details about license plates: 1. Original license plate: The license plate of a used car cannot be transferred along with the vehicle. While the car itself, as private property, can be transferred, the license plate is considered national public property. It does not belong to any individual or group, and the owner only has the right to use the plate, not ownership. Therefore, it cannot be transferred with the car. 2. License plate retention: If the original license plate has been used for more than one year, it can be retained for up to 2 years. The original license plate can be retained when the vehicle is transferred, deregistered, or relocated. You can apply to retain the license plate when purchasing a new car or a used car, provided that all traffic violations and accidents related to the original vehicle have been resolved.

6

1

Share

Can the retake fee be paid on 12123?

How to Remove an Audi Door Handle?

How to use the mirror heating function on Audi A6L?

What to Do When the Envision Won't Start?

How to Use the Audi Electronic Gear Shift?

How to Reset the Electric Door of the Alphard?

Can the license plate of a used car be changed?

What are the symptoms of a faulty ECU in an EFI motorcycle?

Does the CLA feature independent suspension?

What does the engine type approval number mean?

How to use the built-in dash cam in Audi A3?