···
Log in / Register

Can the replaced tires be sold?

4 Answers
CamillaFitz
07/29/25 10:53pm

Yes, they can be sold. Used tires are occasionally purchased, but their value is very low. Here is some relevant information about used tires: 1. Introduction to used tires: As solid waste, used tires are referred to as "black pollution" in the industry. If not disposed of properly, they not only cause resource waste but also environmental impact. Therefore, the Ministry of Industry and Information Technology has issued documents to standardize the comprehensive utilization of used tires from various aspects. 2. Methods for handling used tires: Tire retreading: Tire retreading technology involves repairing and processing worn or otherwise damaged tires to restore their usability. Adding catalysts to refine waste tires into oil: The technology of refining waste tires into oil involves heating and pressurizing waste tires to extract fuel oil. If simple and cheap equipment is used, it can easily cause secondary pollution. Rubber powder regeneration from tires: This technology first uses equipment to crush used tires into 20~30 mesh rubber powder, then desulfurizes the rubber powder to soften it into malleable regenerated rubber, which can be reprocessed into various rubber products. If the desulfurization process is not up to standard, it can also cause pollution. Rubber powder for waterproofing and leak prevention: Waterproof membranes are mainly used for building leak prevention. Most buildings now undergo waterproofing and leak prevention work, and this industry is widespread across the country. The demand for waterproof membranes is enormous, and rubber powder is also a primary raw material for this technology, as waterproof membranes are a type of modified asphalt.

Was this review help?
12
3
Share
OVivian
08/16/25 12:28am

Can used tires be sold? It depends on the condition. If the tires are not heavily worn and still have sufficient tread depth—for example, when tested with a coin, the tread is still visible—then they can definitely be sold. When I dealt with old tires before, I listed them on platforms like Xianyu or sold them to local shops. The price wasn’t high, but it helped recoup some costs. If the tires are too old and completely worn out, they’re worthless and could even cause accidents. Check the production date—don’t sell tires older than 6 years. Safety first—don’t try to make a quick buck by selling damaged tires. Some people specifically buy used tires for refurbishment or repurposing as farming tools, so ask around at local repair shops—it’s an easy way to dispose of them. Never discard them carelessly; be environmentally responsible. Remember, only good-quality tires are worth a little money, so don’t expect too much.

Was this review help?
14
5
Share
Expand All
VonJulia
10/18/25 5:29am

When considering selling old tires, safety factors must be taken into account. If the tread is worn shallow, below the legal limit of 1.6mm, they absolutely cannot be sold as it may cause skidding accidents. I use a simple test method: insert a coin into the tread—if it covers the text, it's acceptable; otherwise, the tires should only be recycled or discarded. Some areas have recycling points where tires can be processed into road materials. Safety comes first—don't harm others or yourself. Experience tells me that heavily worn tires have zero value. When disposing of them, it's convenient and hassle-free to give them to shops or community recycling stations for free. In the long run, don't risk major losses for minor gains—the risk is too high to be worth it.

Was this review help?
3
2
Share
Expand All
SanBrooklyn
12/01/25 6:09am

Old tires can be sold, but recycling is more encouraged. If handled properly, tires can be turned into playground mats or eco-friendly materials, reducing landfill waste. I often see community events recycling old tires, which can be donated to non-profit organizations for public welfare. Those with minimal wear can be sold second-hand at lower prices, but don't expect to get rich; the key is not to pollute the environment. Simply clean them, take photos, and trade on online platforms. Choose eco-friendly methods whenever possible to be responsible for the planet.

Was this review help?
19
3
Share
Expand All
More Forum Discussions

Where to add water to the Chevrolet Malibu XL radiator?

Steps to add water to the Malibu XL radiator are as follows: 1. Turn the pressure cap counterclockwise. If a hissing sound is heard, wait until the sound disappears before opening; 2. Add an appropriate amount of coolant into the coolant expansion tank, ensuring the level is between the MAX and MIN marks on the tank; 3. Start the engine with the coolant expansion tank cap open; 4. After starting the engine, the coolant level in the tank will gradually decrease. At this point, add an appropriate amount of coolant to the expansion tank until the level reaches between the MAX and MIN marks on the coolant expansion tank; 5. Reinstall the cap, ensuring the pressure cap is hand-tightened and fully seated.
18
4
Share

What Causes Abnormal Noise in Car Air Conditioners?

Reasons for abnormal noise in car air conditioners: 1. Lack of lubricating refrigerant oil inside the compressor, causing metal friction sounds when the compressor's electromagnetic clutch engages. 2. Abnormal noise due to excessive tension on the air conditioning belt. 3. Faulty electromagnetic clutch, with damaged internal bearings producing abnormal noise. The following is an introduction to the car air conditioning system: The car air conditioning system is a device that cools, heats, ventilates, and purifies the air inside the vehicle. It includes cooling devices, heating devices, and ventilation devices. This combined system makes full use of the limited space inside the car, with a simple structure that is easy to operate. The air conditioning system can provide a comfortable environment for passengers and reduce driver fatigue.
12
2
Share

Will there be any problems if the Verano's chassis is hit while driving?

Hitting the chassis while driving the Verano can cause problems. Below are the main impacts of chassis scraping during driving: 1. Fuel tank - Impact can deform the fuel tank. 2. Wiring - Some wiring is located on the chassis, which may lead to wiring failures. 3. Exhaust pipe - Frequent impacts can damage the exhaust pipe. 4. Engine oil pan - Wear can affect engine performance. Here is additional information: 1. The chassis typically refers to the automobile chassis, which is the main framework of the vehicle's underside. All power components of the vehicle, including the engine, transmission, differential, and suspension system, are installed on the chassis. 2. The chassis serves to support and install the car engine and its various components and assemblies, forming the overall shape of the vehicle. It receives the engine's power to enable movement and ensure normal driving. Additionally, a good chassis can safeguard the driver's life.
8
1
Share

How to turn on the rear wiper of Honda CR-V

Here are the methods to turn on the rear wiper of Honda CR-V: 1. Push the wiper lever backward (press down to the first gear) to activate the rear window wiper. 2. Lift the wiper lever upward to activate the front wiper spray, and pull the wiper lever downward to activate the rear wiper spray (for cleaning the glass water). More information about Honda CR-V is as follows: 1. Honda CR-V is a compact SUV with a 1.5T L4 engine and turbocharged intake. 2. The dimensions of this car are 4621mm in length, 1855mm in width, and 1679mm in height, with a wheelbase of 2661mm. The body type is a 5-door, 5-seat SUV, equipped with a 6-speed manual transmission and front-wheel drive.
9
1
Share

Why Can't the Car Key Be Turned?

Reasons why the car key can't be turned: The car key may not turn because the steering wheel has automatically locked. This is part of the car's automatic anti-theft system. When the vehicle is turned off, the steering lock pin engages with the steering column, preventing the steering wheel from moving. Even if the key is inserted, it cannot be turned. This is a safety feature designed to protect the vehicle. Here are some solutions: If the car key cannot be turned, you can unlock the steering wheel by inserting the mechanical key, pressing the brake pedal, and then gently turning the steering wheel. Although the steering wheel is locked, it can still be moved slightly. While turning the steering wheel, turn the key at the same time to complete the steering wheel unlocking process. At this point, the vehicle can be started normally.
16
5
Share

How to Replace Brake Pads on a Mercedes-Benz C200?

Mercedes-Benz C200 brake pad replacement steps are as follows: 1. Remove the tire. 2. Loosen the caliper fixing screws and remove the caliper. 3. Release the brake pad clips and take out the brake pads. 4. Use large pliers or a specialized piston pushing tool to push the caliper piston back. 5. Install the new brake pads. 6. Secure the clips and reassemble following the original steps. Additional relevant information is as follows: 1. Brake pads, also known as brake linings, are the most critical safety components in a car's braking system. The effectiveness of all braking is decisively influenced by the brake pads, making high-quality brake pads the protector of both the driver and the vehicle. 2. Brake pads generally consist of a steel plate, an adhesive heat insulation layer, and a friction block. The steel plate is coated to prevent rust, and the coating process is monitored using an SMT-4 oven temperature tracker to ensure the temperature distribution during coating meets quality standards.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.