Can the rear sunroof of the GL8 dual sunroof be opened?

1 Answers
McKevin
07/30/25 4:26am
The rear sunroof of the GL8 dual sunroof can be opened, and the switch is located on the vehicle's ceiling, in the same position as the sunroof switch. Below are the specific operation steps: Opening and closing the sunroof: The panoramic sunroof glass and sunshade can only be operated when the power mode is ON. Use the switch on the front of the roof to open and close the panoramic sunroof glass and sunshade. Automatic operation: Open: Pull the switch backward firmly. Close: Push the switch forward firmly. The panoramic sunroof glass will automatically open or close completely. To stop the panoramic sunroof glass midway, briefly touch the switch. Manual operation: Open: Gently pull the switch backward and hold it until the sunroof reaches the desired position. Close: Gently push the switch forward and hold it until the sunroof reaches the desired position. Raising the panoramic sunroof glass: Raise: Simply press the raise button, and the sunshade will open simultaneously. Close: Push the switch forward firmly. Opening and closing the sunshade (only available on some models): The sunshade switch is located in the front roof control area. Press the corresponding button to open or close the sunshade.
Was this review help?
18
3
Share
More Forum Discussions

How to Replace the Battery in a Tiggo 5 Car Key?

To replace the battery in a Chery Tiggo 5 car key, follow these steps: 1. There are two screws on the back cover of the car key. Use a screwdriver to remove each screw, then open the back cover to access the battery compartment. Remove the old battery and install the new one. 2. Reattach the back cover and secure it with the screws. Below is some additional information about remote keys: 1. The remote key emits a weak radio wave, which is received by the car's antenna. 2. The electronic control unit identifies the signal code, and the system's actuator then performs the locking or unlocking action.
10
2
Share

Which group does Aston Martin belong to?

Aston Martin is the car of Aston Martin Lagonda Limited, with its headquarters located in Gaydon, UK. Below is relevant information: 1. The Aston Martin logo features a pair of outstretched wings, symbolizing the company's ambition to soar with speed and grandeur, much like a bird of prey. The names 'Aston' and 'Martin' inscribed on the logo signify the company's heritage. Aston Martin Lagonda is renowned worldwide for producing open-top tourers, racing cars, and limited-edition sports cars. 2. Founded in 1913 in the UK by Lionel Martin and Robert Bamford, the company was initially named Bamford & Martin. Aston Martin has long been synonymous with exquisitely designed, meticulously crafted, and high-performance sports cars, often referred to as the Rolls-Royce of sports cars.
1
1
Share

What is the Difference Between Standard and Optional Car Configurations?

The difference between standard and optional car configurations is that standard configurations are the factory-default settings, while optional configurations allow you to choose additional features based on your needs. Here is more information about optional configurations: 1. There are many common optional features in cars, such as cruise control, power tailgates, and audio systems. Many standard configurations come with basic audio systems and fewer speakers. 2. If you have higher requirements for car audio, you can pay extra to upgrade to a better system, which also increases the number of speakers. 3. You can also opt for features like keyless entry and power tailgates. For example, placing your foot under the rear bumper can trigger the sensor, automatically opening the tailgate.
18
4
Share

Does a car need brake maintenance?

Under normal circumstances, a car does require brake maintenance. Braking, also known as deceleration, refers to the action of stopping or reducing the speed of a running locomotive, vehicle, or other transportation tools or machinery. The purpose of braking is to slow down and stop the vehicle, and its principle involves the energy conversion process of transforming the vehicle's kinetic energy into thermal energy through friction. Maintenance intervals for the braking system: approximately 30,000 kilometers for disc front wheels, around 60,000 kilometers for disc rear wheels, and about 100,000 kilometers for drum brakes. The braking system is crucial for safety, and the replacement cycle is only a rough reference. The key factor is the thickness, and early inspection is the safest approach. Brake fluid should be replaced after approximately 60,000 kilometers of driving. The necessity of brake maintenance: Brake fluid has strong water absorption properties. After one year of a new car's operation, the brake fluid absorbs about 2% water, and the water content can reach 3% after 18 months. This amount of water is sufficient to lower the boiling point of the brake fluid by 25%. The lower the boiling point of the brake fluid, the more prone it is to forming bubbles, leading to vapor lock, which can cause brake failure or even complete loss of function. Additionally, the braking system is highly affected by the working environment. Once problems arise, the car can become extremely dangerous and uncontrollable. Therefore, it is necessary to clean the surface attachments and sludge from the braking system, enhance the lubrication of the wheel cylinders and guide pins, and eliminate abnormal brake noises to ensure driving safety.
10
0
Share

What does it mean when the EPC light on the car is on?

The EPC indicator light can illuminate in two states: during power-on self-test and under other circumstances. The power-on self-test is an indication that the vehicle is monitoring the status of all sensors before driving. Generally, if the engine is not started after power-on, the light will turn off by itself after about 3 seconds. If the EPC light remains on under other circumstances or does not turn off for a long time after the vehicle is started, the main causes for the EPC light staying on include faults in the engine intake system, throttle valve issues, fuel system problems, engine malfunctions, ECU control unit failures, and brake light defects. Below is a detailed introduction to the reasons for the EPC light illuminating under other circumstances: Engine intake system fault: When the engine intake is not smooth or the intake volume is insufficient, the EPC light will prompt. You can check the engine intake system to identify the problem. Throttle valve fault: Carbon buildup is a common issue with the throttle valve. Additionally, dirt on the main body can also affect intake, causing the indicator light to illuminate. You can clean the throttle valve and remove carbon deposits. Fuel system fault: Examples include substandard fuel, fuel deterioration, or poor fuel atomization. You can choose the appropriate fuel grade. Engine fault: Insufficient engine pressure or issues with the intake valve and other power system components can also trigger the EPC light. You can inspect the engine to troubleshoot the problem. ECU control unit fault: For instance, interference with the vehicle computer signals or false alarms from the vehicle computer. You can reprogram the ECU-related data. Brake light fault: If the brake light does not illuminate, the brake switch fails, or there are issues with the brake circuit. You can inspect the brake system. If the EPC indicator light comes on, the owner can first try turning off the engine and restarting it to see if the EPC light remains on. If it does not illuminate again, there may be no issue, possibly due to the EPC light being affected. If the EPC light stays on or frequently illuminates, it is necessary to drive to the nearest vehicle service point for professional assistance in troubleshooting and eliminating potential safety hazards. The full English name of EPC is Electronic-Power-Control, which translates to electronic power control. Most people refer to it as the engine electronic stability system. The EPC system mainly includes controllers and sensors related to the power system. When the sensor data in the system is abnormal, the EPC system will take measures on the power system according to preset programs. Common EPC indicator lights generally display two colors: yellow and red. If the EPC fault light is yellow and the car can drive normally, proceed slowly to a repair point for vehicle inspection. If the EPC fault light is red, it indicates a more serious situation. You should immediately pull over and contact relevant maintenance personnel for repairs. Forcing the car to drive may directly affect the core components of the vehicle or driving safety.
14
3
Share

How Long Do Brake Pads Last?

The service life of front brake pads is approximately 30,000-50,000 kilometers, while rear brake pads typically last 60,000-100,000 kilometers. Once severe wear is detected, immediate replacement is necessary. Below is extended information about brake pads: 1. Generally speaking, the lifespan of brake pads determines their replacement cycle. Under normal driving conditions, brake pads should be inspected every 5,000 kilometers or so. 2. Inspections should include checking remaining thickness, wear condition, whether both sides are wearing evenly, and whether they return to position properly. Any abnormalities discovered must be addressed immediately. It's important to develop the habit of regular inspections and timely maintenance.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.